Range Rover Sport L494 Parts

Crankshaft Sprocket is the timing gear mounted on the nose of the crankshaft. Fitted to the 2.0L 16-valve turbocharged petrol engine, it drives th...

Gasket seals the exhaust gas recirculation (EGR) valve joint on the left-hand side of the 3.0 V6 diesel (Gen2) engine. It forms a gas-tight seal b...

Gasket seals the exhaust gas recirculation (EGR) valve joint on the left-hand side of the 3.0 V6 diesel (Gen2) engine. It forms a gas-tight seal b...

Wiper Blade is part of the front wash/wipe system, fitted to the right-hand side of the windscreen. It sweeps rain and road debris from the glass ...

Turbocharger Oil Return Hose carries lubricating oil from the turbocharger back to the engine, within the turbocharger oiling circuit. It returns ...

Temperature Sensor monitors engine coolant temperature from its mounting in the cylinder block, within the Cylinder Block and Plugs assembly. The ...

Valve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...

Valve Stem Seal seals the valve stem where it passes through the valve guide in the cylinder head of Ingenium diesel engines. Fitted over the top ...

Crankshaft Gear in the engine timing drive of the supercharged petrol V6 and V8 engines. Mounted on the nose of the crankshaft, it drives the timi...

Drive Belt for the front engine accessory drive. The multi-ribbed belt transmits drive from the crankshaft pulley to the engine ancillaries. For 3...

Cylinder Head Cover Gasket for the 2.0L Petrol engine. This gasket seals the cylinder head cover to the cylinder head, containing oil within the v...

Screw - M6 x 25mm threaded fastener used across the 2.0L Ingenium petrol engine assembly. Secures components at the timing gear, fuel injector, wa...

Coolant Temperature Sensor mounted in the cylinder head, measuring engine coolant temperature. The sensor provides the temperature signal used by ...

Lambda Sensor installed in the exhaust system to measure the residual oxygen content of the exhaust gas. The sensor signal is used by the engine c...

Gasket - Turbocharger Cooling

Accessory Drive Belt transmits drive from the crankshaft pulley to the engine's ancillary components. This multi-ribbed (poly-V) belt serves the a...

Hex Head Bolt securing the timing belt idler pulley at the lower timing gear of the 3.0L V6 diesel engine. This is a single fixing bolt for the id...

Camshaft Position Sensor for the 4.4L SDV8 turbo-diesel V8 engine. The sensor reads the rotational position and speed of the camshaft and relays t...

Anti-Roll Bar Bush - Rear is the mounting bush that locates the rear anti-roll (stabiliser) bar to the chassis. It insulates and secures the stabil...

Brake Fluid - DOT 4 low-viscosity hydraulic brake fluid, supplied in a 1 litre container. It transmits pedal pressure through the hydraulic brakin...

Bolt is a chassis fastener securing the front and rear crossmember and stabiliser (anti-roll) bar mountings. Supplied individually.

Timing Chain Guide that locates and supports the timing chain along its run within the timing drive. It controls the chain path and reduces vibrat...

Coolant Hose carries engine coolant between the thermostat housing and the engine on the supercharged 3.0L V6 and 5.0L V8 petrol engines. It runs f...

Bonnet Gas Strut for the bonnet lift mechanism. The gas-charged strut raises and supports the bonnet as it is opened and holds it securely in the r...

Drain Plug Sealing Washer seals the M18 oil drain and filler plug on the transfer case. The washer deforms as the plug is tightened to form a leak...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Ignition Coil for V6 and V8 petrol engines, mounted directly on the spark plug in a coil-on-plug arrangement. The coil steps up the battery supply...

Upper Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the joint at the upper section of the two-piece inlet manifold, ma...

Tailgate Switch operates within the powered tailgate and luggage compartment locking controls. The switch signals tailgate release, actuating the ...

Upper Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the joint at the upper section of the two-piece inlet manifold, ma...

Rear Anti-Roll Bar Link is the left-hand drop link connecting the rear stabilizer (anti-roll) bar to the suspension. Compatible with both conventi...

Lower Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the lower section of the inlet manifold to the cylinder head, seal...

Auxiliary Drive Belt for the front-end accessory drive, the multi-ribbed belt driven by the crankshaft pulley. The belt transmits drive from the c...

Inlet Valve for the supercharged 3.0L V6 petrol engine (AJ126). The inlet valve seals against its seat in the cylinder head and opens on the intake...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

Accessory Drive Belt from the front-end accessory drive. The primary serpentine belt driven by the crankshaft pulley to turn the engine ancillarie...

Drive Belt is the accessory drive belt for the 3.0L V6 diesel engine. It transmits drive from the crankshaft pulley to the engine-mounted ancillar...

Inlet Manifold Gasket for the right-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifol...

Inlet Manifold Gasket for the left-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifold...

CV Boot Kit for the rear drive shaft constant velocity joint, providing the components required to renew the protective boot. The CV joint boot re...