Terrafirma Suspension Parts

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Centre Cubby Box finished in black vinyl, fitting the centre position between the front seats to provide an enclosed storage compartment with a mou...

Rear Shock Absorber, standard-travel, for the rear axle suspension. The damper controls vertical movement of the rear axle and damps spring oscill...

Bonnet Intake Grille Set, finished in satin black with stainless steel mesh, supplied as a matched pair. The grilles fit over the bonnet air intak...

Centre Silencer Replacement Pipe for the exhaust system, fitting in place of the intermediate (centre) silencer box. The pipe provides a straight-...

Lamp Guard - Round - 73mm - a protective guard that fits over a round 73 mm lamp to shield the lens. It clamps over the light unit to protect the ...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Wheel spacer kit fitted between the wheel hub and road wheel within the wheel mounting assembly. The spacers move the wheel mounting face outward...

Wheel Spacer Set, 30 mm: silver alloy wheel spacers for a 5x165 hub, supplied as a set of four with a complete set of wheel nuts. Machined from bi...

Light Guard Set - Rear Hinged rear lamp guard set that protects the rear lamp lenses from stone strike and low-speed impact during off-road use. T...

Rear Shock Absorber provides damping control on the rear axle for suspension set up with approximately 50 mm of additional travel. Twin-tube const...

Rear suspension shock absorber designed to control vertical movement of the axle and dampen spring oscillation within the suspension system. This...

Lamp Guard for 95mm NAS round lights fitted to Defender models up to 2016. Designed to protect the larger-diameter 95mm North American Specificati...

Extended Bump Stops are compression-travel limiters that sit between the axle and the chassis to cap suspension up-travel and cushion the axle agai...

Steering Damper Assembly for the front axle steering linkage. The hydraulic damper mounts across the steering linkage, where it controls lateral o...

Intercooler Hose Kit - Silicone Blue for the turbocharger and intercooler charge-air circuit on the Td5 2.5L 5-cylinder turbo diesel engine. The k...

This new Terrafirma winch has a powerful 6hp, 12v motor combined with a 3-stage planetary gearbox that gives over 5 tonnes of pulling power. It has...

Steering Guard - 8mm Alloy - LHD - Black for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate wit...

Front Coil Spring - Medium Duty, +2" Lift (Terrafirma). These front coil springs raise ride height by approximately 2 inches over standard and are...

Intercooler Hose Kit - Silicone Black for the turbocharger and intercooler air circuit on the TD5 2.5L 5-cylinder turbo diesel engine in the Defend...

Exhaust Downpipe - De-Cat for the front section of the exhaust system, fitted downstream of the turbocharger outlet on TD5 diesel applications. Th...

Tow Ball 50mm flange-fixing tow ball for use with a bolt-on tow bar drop plate. Rated for a maximum gross trailer weight of 3.5 tonnes, with a D-v...

Steel Road Wheel is a welded steel road wheel with a 6.5 x 16 inch rim, finished in black with a Wolf-style profile for road use with tubeless tyre...

Front Wheel Arch Kit - extended +30mm width - for Defender 90 and 110, supplied as a pair. Moulded from plastic to closely match the profile of th...

Rear Wheel Arch Kit, +30mm wide, supplied as a pair for the rear of the body. The arches extend coverage 30mm beyond the standard profile to suit ...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Front Coil Spring - Heavy Load, Standard Height (Terrafirma). These front coil springs are rated for heavy load while retaining the standard ride ...

Brake Pad Set - Rear - a set of friction pads for the rear disc brakes, forming part of the rear braking assembly. The pads locate in the rear bra...

Dislocation Cone - Rear Coil Spring for the rear coil spring seat assembly. When long-travel shock absorbers or lowered top-mount shock relocators...

Rear Coil Spring for the rear suspension, fitting between the axle and the chassis spring seat to support the vehicle and absorb road inputs. This...

Snow Cowl - a moulded ABS cover that fits over the wing-top fresh-air (heater) intake vent. Based on the original military-pattern design, it shie...

Spring Retaining Plate - Rear for the rear coil spring seating assembly on Defender 110 and 130. Coil springs can become dislodged from their axle...

Coil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...

Silicone Intercooler & Turbo Hose Kit - a set of silicone charge-air hoses for the 300Tdi turbo and intercooler circuit, replacing the standard...

Side Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...

Rear Wheelarch Eyebrow Moulding - Unpainted for the Defender body exterior. This moulding fits over the rear wheelarch aperture, covering the body...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Modular Steel Wheel - Black - 7J x 16 A modular steel road wheel finished in black, sized 7J x 16 with an ET08 offset. The steel construction suit...

Front suspension shock absorber designed to control spring oscillation and maintain tyre contact with the road surface. Twin-tube low-pressure ni...

Return to Centre Steering Damper for installation within the steering linkage assembly. This unit mounts between the axle steering arms and the st...

Rear Shock Absorber provides damping control within the rear axle spring and damper assembly for suspension set up with extended travel. Twin-tube...

Front Cat-Delete Down Pipe replaces the catalytic converter section of the front exhaust on the Defender 2.4L TDCi (Puma). Manufactured from 1.5mm...

Anti-Roll Bar Bush in polyurethane, 28mm bore, for the rear anti-roll bar mounting. The bush sits where the bar is clamped to its chassis brackets...

Steering Guard - 8mm Alloy - LHD for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate with a tape...

Rear Coil Spring Pair - Medium Load, +2" Lift (Terrafirma). These rear coil springs raise ride height by approximately 2 inches over standard and ...

Winch Remote Control operates an electric recovery winch wirelessly, allowing the operator to stand clear of the winch line during recovery. Wirel...

Front Door Card is the interior trim panel that covers the inner structure of the front door, concealing the window regulator, latch linkage and wi...

Anti-Roll Bar for the rear suspension, 28mm bar diameter. The bar mounts to the chassis on a pair of clamped bushes and connects to the axle throu...