Land Rover Parts

Service Filter Kit for the 200 TDi 2.5L turbo diesel engine, grouping the filters and sealing washers required for a routine engine service under a...

Steering Damper - hydraulic steering damper supplied with its mounting bushes. Fitted across the steering linkage, it damps shocks and vibration f...

Osram Night Breaker? Unlimited

Core Plug for the rear of the camshaft bore in the V8 petrol cylinder block. The cup-type plug seals the machined opening at the rear of the camsh...

Fuel Connector Assembly - 2-Hose in the fuel delivery and pressure-regulation circuit. The connector block forms the union for the fuel lines at th...

Brake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...

Oil Return Hose Gasket - a sealing gasket in the turbocharger lubrication circuit. It seals the joint at the turbocharger oil return (drain) hose,...

Iridium Spark Plug for the 2.0L 16V turbocharged petrol engine. The iridium centre electrode withstands the high cylinder temperatures and pressure...

Radiator Hose - Engine Vent Elbow forms the vent connection between the engine and the radiator within the cooling system pipes and hoses. The elb...

O-Ring - Turbo - Upper

Supercharger Repair Kit for the 3.0L supercharged V6 petrol engine - the front-end overhaul kit for the belt-driven supercharger. The supercharger...

Brake Pad Set

Powertrain Mount Insulator locating the transmission/powertrain mounting bracket. The rubber-to-metal insulator supports the powertrain against th...

Accessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...

Lambda Sensor - Front (pre-catalyst oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads in...

Drive Belt - V-belt in the front-end accessory drive of the 3.0L Ingenium six-cylinder petrol engine, driving the belt-integrated starter generator...

Oil Cooler Gasket for the AJ-Series V8 petrol engine, sealing the oil cooler and filter housing to the cylinder block. This gasket forms the oil-t...

Window Regulator and Motor - complete front door glass lift assembly, left-hand side. The regulator carries the door glass on a guided rail and ra...

Ancillary Drive Belt - engine front-end accessory drive. Multi-ribbed (poly-V) belt driven from the crankshaft pulley to turn the engine-mounted a...

Rear Brake Pad Set - friction pads for the rear disc brake assembly, supplied less springs. The pads locate in the rear caliper carrier and are cl...

Inlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...

Alternator - belt-driven charging unit for the supercharged 3.0L V6 and 5.0L V8 petrol applications. Driven from the crankshaft by the front end a...

Front Wheel Arch Moulding for the left-hand side, part of the exterior body cladding assembly. The moulding follows the flange of the front wing w...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the right-hand wiper arm, sweeping the dr...

Wheelarch Eyebrow is the front wheelarch eyebrow moulding, part of the front wheelarch trim assembly. It mounts to the upper section of the front ...

Wiper Blade clears the front windscreen as part of the wash/wipe system. It is the front blade fitted to the left-hand wiper arm, sweeping the pas...

Rear Brake Disc - vented, coated. Part of the rear brake discs and calipers assembly. The disc mounts to the rear hub flange and provides the fric...

Suspension Arm - front lower control arm (wishbone) forming part of the front suspension, locating the wheel hub carrier to the subframe and contro...

Wiper Blade

Crankshaft Pulley mounts on the front of the crankshaft of the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It transfers drive from the cra...

Oil Pump, the pump at the heart of the engine lubrication system. Driven by the engine, it draws oil from the sump and delivers it under pressure ...

O-Ring for the turbocharger installation on the 4.4L V8 turbo diesel, right-hand primary turbocharger. The ring seals a connection at the turbocha...

Wiper Blade is part of the front wash/wipe system, fitted to the right-hand side of the windscreen. It sweeps rain and road debris from the glass ...

Primary Fuel Filter - the main in-line filter in the diesel fuel supply circuit, supplied complete with its mounting bracket. The filter is positi...

Engine coolant temperature sensor for the engine management system on the 1.8L K Series 4-cylinder petrol engine. The sensor is a thermistor that ...

Brake Pad Wear Sensor for the front axle, part of the brake pad wear warning circuit. The sensor is located in the brake pad and carries a wire lo...

Auxiliary Radiator - a supplementary heat exchanger in the engine cooling circuit, mounted in the front cooling pack alongside the main radiator. ...

Fan Assembly

Anti-Roll Bar Link for the front suspension. The link connects the front anti-roll bar to the suspension, transmitting body-roll loads into the ba...

Air Suspension Hose

Radiator Ventilation Hose vents the cooling system at the radiator, within the cooling system pipes and hoses. It allows air to bleed from the coo...