Land Rover Parts

Window Regulator and Motor - rear door window lift mechanism, supplied complete with its electric drive motor. The regulator sits within the rear ...

Crankshaft Sprocket is the timing gear mounted on the nose of the crankshaft. Fitted to the 2.0L 16-valve turbocharged petrol engine, it drives th...

Turbo Gasket sealing the joint between the exhaust manifold and the turbocharger. The same gasket seals both the exhaust manifold and the turbocha...

V-Belt for the front-end accessory drive of the 3.0L AJ20P6 six-cylinder petrol engine. The belt is driven by the crankshaft pulley and transmits ...

O-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...

Front wiper blade for the windscreen wiper assembly. The blade clips onto the wiper arm and carries the rubber wiping element that sweeps the wind...

Fuel Pump for the fuel delivery system. It supplies fuel to the engine at the pressure the fuel system requires, maintaining a steady flow to meet ...

Clutch Kit renews the friction components that transmit drive between the engine and the manual gearbox. The clutch sits between the engine flywhe...

Coupling Pump is the electro-hydraulic pump that operates the rear axle all-wheel-drive coupling, generating the hydraulic pressure that engages th...

Rear Door Latch for the left-hand rear side door. The latch secures the door to the body striker and integrates the door locking mechanism, includ...

Air Flow Sensor - V8 is the mass air flow (MAF) sensor for the V8 EFI petrol engine, forming part of the air cleaner and intake assembly. Mounted ...

Coolant Expansion Tank Cap - pressure cap sealing the coolant expansion (overflow) container in the engine cooling circuit. The cap is a working c...

Exhaust Gas Recirculation (EGR) Valve for the 2.2L TDCi diesel engine, forming part of the exhaust gas recirculation circuit. The valve meters a c...

Wiper Blade for the windscreen wiper assembly. The blade fits onto the wiper arm and sweeps the windscreen to clear rain and road spray, maintaini...

Ignition Coil for the 2.0L four-cylinder petrol engine (AJ200 / AJ20P4, including PHEV). This is a coil-on-plug unit that mounts directly on the sp...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Coolant Expansion Tank - the header and overflow reservoir of the engine cooling circuit. It receives coolant displaced from the radiator and engi...

Anti-Roll Bar Link connects the front anti-roll bar to the suspension within the front suspension assembly. Mounted at the front cross member, it ...

Fuel Vapour Valve fitted to the fuel tank as part of the evaporative emissions and tank ventilation system. It vents fuel vapour from the tank to ...

Crankshaft Position Sensor for the 2.0L 16V Ti-VCT turbocharged petrol engine (240PS). It mounts in the block adjacent to the crankshaft reluctor r...

Crankshaft position sensor for 3.0L V6 and 4.4L V8 diesel engines, part of the engine management sensing circuit. The sensor sits at the crankshaf...

Glow Plug - the pre-heat element for one cylinder of the 2.0L four-cylinder AJ200 / AJ20D4 diesel engine, threaded into the cylinder head so its ti...

Rear Door Latch for the right-hand rear door. This is a power-operated double-locking latch with a dead-lock function, retaining the door closed an...

Lambda Sensor (exhaust oxygen sensor) for the exhaust and engine management system of V6 and V8 petrol engines. The sensor threads into the front ...

Coolant Expansion Tank - the pressurised header and overflow reservoir of the engine cooling system. The tank takes up the coolant volume displace...

Front Brake Pad Wear Sensor Wire from the front brake pad wear warning circuit. The sensor wire is routed into a slot in the front brake pad frict...

O-Ring for the Exhaust Gas Recirculation (EGR) circuit. This seal maintains a gas-tight joint within the EGR section, sealing the connection betwe...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

Anti-Roll Bar Link - Front, the connecting link between the front anti-roll bar end and the suspension strut in the front suspension assembly. The...

ABS Sensor - front wheel speed sensor, part of the anti-lock braking and vehicle dynamics sensing circuit. The sensor mounts at the front hub carr...

Clip is a fastening used within the body moulding assembly, retaining exterior trim and moulding panels against the bodywork.

Valve Stem Seal, Exhaust - cylinder head valve train of the 2.0L 16-valve TiVCT turbocharged petrol engine. Fits over the exhaust valve stem at th...

Accessory Drive Belt for the front end accessory drive of the 2.0L Ingenium four-cylinder engine (AJ200 / AJ20P4, petrol and diesel applications). ...

Suspension Arm - Front Lower Rear - LH is the rearward lower control arm in the front multi-link suspension. It locates the lower end of the wheel ...

Inlet Manifold Pressure Sensor for the diesel engine management air intake system, mounted directly on the inlet manifold. The sensor reports abso...

Front Lower Suspension Arm, left-hand (LH) side, part of the front independent suspension assembly. The lower control arm connects the front wheel...

Secondary Accessory Drive Belt - the supercharger drive belt within the front end accessory drive of the supercharged petrol V6 and V8 engines. Me...

Front wheel hub with bearing, part of the front knuckle and hub assembly. The hub locates in the steering knuckle and carries the road wheel and b...

Brake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...