Land Rover Parts

Reverse Light - a 95mm round rear reversing lamp with a clear lens and LED illumination. It forms part of the rear lamp arrangement, projecting wh...

Light Guard Set - Rear Hinged rear lamp guard set that protects the rear lamp lenses from stone strike and low-speed impact during off-road use. T...

Radiator Assembly for the Td5 2.5L 5-cylinder turbo diesel engine cooling system. The radiator is the primary heat-exchanger in the coolant circui...

Air Filter Element is the replaceable filtration element of the engine air intake system. It seats inside the air cleaner housing and traps dust an...

Parabolic Leaf Spring for the rear axle, supplied as a matched pair. A parabolic spring uses fewer, tapered leaves than a conventional multi-leaf ...

Auxiliary Fuel Tank for the fuel storage system, in the original military pattern. This under-seat auxiliary petrol tank supplements the main fuel...

Reverse Lamp is part of the rear lighting assembly, mounted at the rear of the vehicle. The lamp illuminates the ground behind the vehicle when re...

Core Plug for the rear of the camshaft bore in the V8 petrol cylinder block. The cup-type plug seals the machined opening at the rear of the camsh...

Differential Guard for the axle differential, protecting the diff housing and cover from impact damage off-road. Clamps over the differential cent...

Carburettor Grommet for the twin Stromberg carburettor installation on the V8 petrol engine. It sits in the air cleaner and carburettor air intake ...

Drive Belt Bracket and Bearing for the auxiliary (accessory) drive belt system. The bracket mounts to the engine and locates a pulley within the a...

Suitable for Fitment All diesel models from (VIN) 7A000001 on

Front Bumper - a replacement front bumper fitted with integrated Ring LED daytime running lamps. The bumper forms the front-end impact and mountin...

Fuel Block Connector for the Td5 2.5L 5-cylinder turbo diesel engine, incorporating the fuel pressure regulator at the fuel block. It forms the ju...

Bonnet Gas Strut a gas-filled telescopic support for the bonnet. It counterbalances the weight of the bonnet, assisting opening and holding it sec...

Front Door Latch Assembly - Right-Hand for the Defender door locking system. This mechanical latch assembly is mounted inside the right-hand front...

Inlet Valve Stem Seal for the cylinder head valvetrain, fitted over the inlet valve stem at the top of the valve guide. The seal meters the oil pa...

Wheel Spacer Set, 30 mm: silver alloy wheel spacers for a 5x165 hub, supplied as a set of four with a complete set of wheel nuts. Machined from bi...

Front ABS Wheel Speed Sensor for the anti-lock braking system. Mounted at the front wheel hub, the sensor reads the toothed reluctor ring as the wh...

Hazard Switch - 24V is the dashboard-mounted hazard warning light switch for 24V electrical systems. This switch activates the hazard warning flas...

Lamp assembly indicator front RH

Drive Flange operates within the rear differential and final drive assembly, providing the bolted coupling that transmits drive torque between the ...

TD5 oil cooler adaptor gasket

Oil Pump Relief Valve Spring for the 3.5L V8 petrol engine lubrication system. The spring sets the opening pressure of the oil pump pressure-relie...

Spark Plug for the petrol engine ignition system, fitted to the 2.5L four-cylinder and 3.5L/3.9L V8 petrol engines. It screws into the cylinder he...

Exhaust mounting spacer tube

Size/Diameter: 1/4" unf x 7/8"

Auxiliary Belt - ancillary drive belt for the 200 TDi engine. Runs from the crankshaft pulley to drive the engine ancillaries such as the alternat...

Power Steering Belt - polyvee (multi-rib) drive belt that drives the power-assisted steering pump. Runs in the auxiliary drive, transferring rotat...

Differential Pinion Inner Taper Roller Bearing used in the differential pinion shaft assembly within the axle final drive. The bearing supports th...

Wheel Nut - Black secures a road wheel to the hub, clamping the wheel against the hub face when tightened to the specified torque. The nut carries...

Accelerator Cable in the throttle control linkage, connecting the accelerator pedal to the fuel injection pump. It transmits pedal movement to the...

Wheel Nut for alloy wheel fitment on Defender, Discovery 1 and Range Rover Classic. This tapered-seat wheel nut is designed for use with alloy whe...

Instrument Cowl is the binnacle panel that surrounds the instrument cluster and gauges within the dashboard. It forms the moulded surround hooding...

Copper Sealing Washer used to seal a threaded or banjo joint in the fuel and lubrication circuits. The soft copper deforms under tightening to con...

Exhaust Fitting Kit for a short-wheelbase exhaust system, left-hand drive configuration. The kit provides the mounting components and fixings need...

Transfer Box Intermediate Shaft Shim, 0.005in thick, used in the transfer box to set the end float of the intermediate gear on its shaft. Selectiv...

Clutch Anchor Plate - a steel mounting plate within the clutch pedal box assembly. It anchors the clutch pedal pivot to the bulkhead, providing th...

Brake Caliper is the front left-hand hydraulic caliper in the front disc brake assembly. It houses the pistons that press the brake pads against t...

Brake Caliper is the front right-hand hydraulic caliper in the front disc brake assembly. It houses the pistons that press the brake pads against ...

Footwell Repair Panel is a welded body repair panel for the left-hand (offside) footwell, replacing the corroded or damaged footwell section ahead ...

Radiator is the main engine cooling radiator with an aluminium core, serving the front of the engine cooling circuit. Mounted ahead of the engine ...

Bolt - an imperial hexagon-head bolt with a 5/16" UNF thread and a 2-3/4" shank length. This is an engine-area fixing for early Series application...

Swivel Pin Housing Locking Plate mounts to the front axle swivel pin housing. It locks the swivel pin in position and provides the fixed stop that...

Front Towing Eye / Lifting Ring bolts to the front of the chassis, providing an anchored attachment point for towing, recovery and lifting. The ri...

Bonnet Grommet is a rubber grommet fitted within the bonnet assembly. It lines the aperture through which the bonnet prop rod or release mechanism...

Spire Nut - a spring U-type nut that slides over a panel edge to receive a self-tapping screw. It provides a captive threaded seat where there is ...

Heater Control Bulb illuminates the heater and ventilation control panel. Fitted into the front HVAC control assembly, it backlights the heater co...