Products

Wheel Spanner - 24mm for removing and fitting wheel nuts on Land Rover vehicles. This 24mm spanner is sized for the standard wheel nut used across...

Wheel Spanner with a 27 mm socket, a hand tool for removing and refitting wheel nuts. Engages the 27 mm hexagon of the wheel nut to loosen or tigh...

Repair Washer - M10 for use in suspension, axle and body fastening applications. A large-diameter flat washer that distributes the clamping load o...

Fuel Pipe Clip retains and routes fuel delivery pipework within the fuel system, holding the lines securely in their intended position. It prevent...

Suitable for Fitment All diesel models from (VIN) 7A000001 on

Fuel filter element used within the diesel fuel system to remove particulate contamination and water from fuel prior to delivery to the high-pressu...

Fuel Filter TD4

Inline Fuel Filter Kit from the Td5 2.5L 5-cylinder turbo diesel fuel system. The assembly sits in the fuel feed line, filtering the diesel ahead o...

Filter and housing D2 TD5

Air Bleed Valve for the fuel filter and sedimenter housing, part of the diesel fuel supply system. Mounted in the filter housing, the valve allows...

Fuel Filter Assembly for the Td5 2.5L 5-cylinder turbo diesel fuel system. It filters the diesel supply between the tank and the injection system,...

Fuel Filter Assembly within the diesel fuel supply circuit, removing contaminants from the fuel before it reaches the injection system. Installed ...

Fuel Filter Holder - With Filter for the Defender Puma diesel fuel system. This complete filter assembly mounts in the engine bay fuel circuit and...

Fuel Filter Holder - With Filter is the filter assembly in the diesel fuel supply circuit. It mounts in the engine bay fuel circuit and removes pa...

Fuel Pipe - Filter to Injection Pump for the Defender 300TDi 2.5L diesel (non-EGR). This pipe carries filtered diesel from the fuel filter housing...

Fuel Feed Pipe carries fuel from the fuel pump outlet to the fuel filter inlet within the fuel delivery system. A pre-formed pipe assembly that ro...

Fuel Pipe - twin-line pump-to-engine section of the fuel delivery circuit on the 2.5L Td5 five-cylinder turbo diesel. The two lines are routed tog...

Fuel Return Line for the TD5 2.5L 5-Cylinder Turbo Diesel engine, fitted to the Defender 90 fuel system. This hose carries surplus fuel from the h...

Fuel Pipe from the Td5 2.5L 5-cylinder turbo diesel fuel system, running on the low-pressure side between the inline fuel filter and the pump. It ...

Fuel Pipe forms part of the low-pressure fuel supply circuit, carrying diesel from the fuel pump to the fuel filter. Fitted to the Td5 2.5L 5-cyli...

Fuel Pipe - Pump to Engine for the Td5 diesel fuel delivery system. This under-body pipe assembly carries fuel from the in-tank pump forward to th...

Fuel Filter Shield - rear shield section of the chassis-mounted fuel filter housing on TDCi diesel engines. The filter housing sits low on the cha...

Cup Washer for securing the instrument panel to the engine cowl on the Defender 90 and 110. This pressed steel cup-type washer fits beneath the in...

Fuel Filter Cover Assembly - front cover for the chassis-mounted fuel filter and sedimentor on diesel engines, including the 200 TDi, 300 TDi and T...

Water-in-Fuel Sensor for the Td5 2.5L 5-cylinder turbo diesel fuel filter / sedimentor assembly. It threads into the base of the fuel filter housi...

Water-in-Fuel Sensor for the Td5 2.5L 5-cylinder turbo diesel fuel filter / sedimentor assembly. It threads into the base of the fuel filter housi...

Spring Washer for use as a locking fastener component across Land Rover assemblies. A helical split spring washer providing resistance against fas...

Spring Washer - M6 single-coil spring lock washer. Fitted beneath a nut or bolt head, the split single-coil section bears against the fastener to ...

Spring Washer fitted under a nut or bolt head to resist loosening from vibration. An M8 split-ring (single-coil) spring washer. The sprung opening...

Spring Washer - M10 single-coil spring lock washer. Fitted beneath a nut or bolt head, the split single-coil section bears against the fastener to...

Fuel Filler Cap that seals the fuel tank filler neck. Non-locking type with a black finish, closing the filler neck against fuel vapour loss and t...

Fuel Filler Cap for the fuel tank filler neck, part of the fuel storage and filler assembly. Threads onto the filler neck to seal the fuel tank af...

Fuel Filler Hose connecting the external fuel filler neck to the fuel tank on the Defender. This rubber hose forms the sealed connection between t...

Fuel Tank Filler Hose - moulded rubber hose connecting the filler neck to the fuel tank. Carries fuel from the filler opening down into the tank a...

Filler pipe hose 90

Fuel tank filler hose pipe

Hose - Filler Pipe

Fuel Tank Filler Hose - moulded connecting hose from the fuel tank filler assembly. It joins the filler neck at the body aperture to the inlet spi...

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Spring Washer - 6mm for use across gearbox, clutch and general fastening applications. A helical split spring washer for M6 fasteners, providing r...