Products

Locking Wheel Nut Set for alloy wheels, comprising four locking nuts that replace standard wheel nuts to deter wheel theft. Thread size 16 x 1.50;...

Fitting Kit for Pacet Fan

Thermostat Kit for Electric Fan Kenlowe

Spare Wheel Cover - a soft cover that fits over an externally mounted spare wheel to shield the tyre and rim from dirt, road grime, moisture and UV...

Spare Wheel Cover fits over an externally mounted spare wheel to protect the tyre and wheel from weather, road dirt and UV exposure. This is the h...

Rear Lamp Guard fits over the rear lamp unit to protect the lens and housing from impact damage. It shields the light cluster from knocks by branc...

Differential Guard - a wrap-around steel guard that shields the front or rear differential housing from impact and debris during off-road use. Des...

Battery Isolator Switch - key-operated master cut-off switch for the vehicle electrical system, rated at 300A. Wired inline on the main battery le...

Brake Hose Kit - a set of flexible brake hoses that connect the rigid chassis brake pipes to the front calipers and the rear axle. The kit contain...

Weathershield is a front door wind and rain deflector, supplied as a pair. Each shield mounts along the top of the door window aperture and deflec...

Wheel Arch Extension Set fits over the wheel arches to widen the arch line and accommodate larger tyres. The set is supplied with the openings pre...

Upgrade and protect your Land Rover Discovery 1 (3-Door) with this high-quality fibreglass wheel arch extension kit. Designed with notches cut out ...

Rock Sliders

Rock guards, rock sliders (pair) galvanised. Fits Discovery 1 and Range Rover Classic (except LSE)

Rear Coil Spring for the rear suspension, a heavy-duty rating that raises ride height by approximately 40mm over standard. The increased free leng...

Rear Coil Spring for the rear suspension, raising ride height by approximately 40mm over standard. Wound from 18mm wire with a free height of 445m...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Shock Absorber - a gas-charged front damper for the suspension. Fitted between the front axle and the chassis, it damps the motion of the road spr...

Air Ram - the forward-facing intake head of a raised air intake (snorkel) system, in 3" diameter. Mounted at the top of the snorkel body, it draws...

Raised Air Intake Mantec - 90/110 200TDi

Raised Air Intake relocates the engine's air induction point from the inner wing up to roof height, feeding the air cleaner through a raised snorke...

Brake Hose Kit - Stainless Steel is a complete set of five braided stainless steel flexible brake hoses for the hydraulic braking circuit. Each fl...

Front Twin Shock Tower (Pair) - an uprated front shock absorber mounting set for coil-sprung suspension that allows a second shock absorber to be f...

Wading Kit for the drivetrain and engine breather system, extending the breather points of the axles, gearbox and engine to a higher level. Raisin...

Front Coil Springs for the front suspension, raising ride height by approximately 50mm over standard. Supplied as a pair. The raised height increa...

Rear Shock Absorber - a hydraulic damper for the rear suspension, controlling axle movement and wheel oscillation over uneven terrain. Matched to ...

Cubby Box - a centre console storage box fitted between the front seats, providing a lidded storage compartment that also serves as a centre armrest.

Rear Gas Shock Absorber - a gas-charged hydraulic damper for the rear suspension, controlling axle movement over road and off-road terrain. Matche...

Synthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...

Waterproofing Kit - V8 seals the ignition system of the V8 petrol engine against water and damp. The kit waterproofs the distributor and ignition ...

Front Rubber Mat is a drop-in footwell mat that protects the front floor from dirt, moisture and wear. Moulded to the contour of the front footwel...

Rear Rubber Mat Set is a set of drop-in footwell mats that protect the rear floor from dirt, moisture and wear. Moulded to the contour of the rear...

Spring Retaining Plate Front coil spring retaining plate that clamps over the top of the spring at its seat, holding the spring captive so it canno...

Gear Knob - Aluminium - LT77/LT85 is a machined aluminium gear knob for the main gear lever. It threads onto the gear lever of the LT77 and LT85 m...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Shock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...

rock slider, rock guards (pair) BA 2091 Generic picture, the set supplied is BLACK coated, NOT galvanised.

Rear Spring Pair - the two rear road springs of the coil-sprung suspension. Mounted between the rear axle and the chassis, they carry the rear loa...

Front Coil Springs - heavy-duty road springs for the front axle, supplied as a pair. The springs seat between the front axle and the chassis sprin...

Rear Lamp Bulb Holder Double-pole bulb holder that seats in the rear lamp housing, retaining the bulb and carrying the electrical contacts between ...

Single-Pole Bulb Holder fitted within the rear lamp assembly, providing the electrical interface and physical retention for the stop or tail lamp b...

Bulb Holder - Clock Illumination is the socket assembly that seats the illumination bulb behind the dashboard clock, forming part of the instrument...

Alternator Bearing for the vehicle charging system. This bearing supports the alternator rotor shaft, allowing it to spin freely within the altern...

Blanking Plug - plastic plug sealing a 1-1/4" (32mm) diameter aperture in the rear cross member. Installs into unused or access holes in the bodys...