Products

Brake Hose Clip in the brake hydraulic circuit, securing a flexible brake hose to its mounting bracket where the hose crosses from the chassis to a...

Shield - Water Splash

Intercooler to Inlet Manifold Hose for the 300TDi 2.5L turbocharged diesel engine intercooler circuit on the Discovery 1 and Range Rover Classic. ...

Joint washer exhaust TD5

Clip - Side D Pillar Upper Discovery 3 Discovery 4 RS1 RS2

Flange Bolt is an M8 x 55 mm bolt with an integral flange beneath the head. The flange spreads clamp load across the joint face and acts as a buil...

Flange Bolt is an M8 x 70 mm bolt with an integral flange beneath the head. The flange spreads clamp load across the joint face and acts as a buil...

Bolt is an M8 x 80 mm threaded fastener used to clamp two components together at a bolted joint. It is tightened into a threaded hole or secured w...

Hub to Knuckle Bolt, M12 x 70mm. Secures the front wheel hub assembly to the steering knuckle within the front suspension and hub assembly.

Flanged Hex Bolt, M12 x 70mm. Secures the front wheel hub assembly to the steering knuckle (upright) within the front suspension and hub assembly....

Bolt - a threaded fastener used within the axle and suspension assembly. It secures front axle case mountings and rear suspension arm attachments,...

Bolt - a threaded fastener used within the rear axle and suspension assembly. It secures the rear knuckle and suspension arm mountings, clamping e...

Glove Box Door Damper. Controls the rate at which the glove box lid opens, providing a smooth, damped movement within the facia glove box assembly.

Bonnet Safety Catch for the bonnet (hood) latch system, the secondary catch that retains the bonnet after the primary latch is released. It holds ...

Latch

Push-Button Switch for the lower tailgate release. Mounted in the tailgate assembly, this switch electrically triggers release of the lower tailga...

Door Lock Control Cable - a control cable within the door linking the lock mechanism to the latch, transferring locking and unlocking movement.

Flanged Screw - M6 × 12mm is a metric flanged-head fastener used in body, chassis, and electrical component assembly points on Land Rover vehicles....

Flanged Head Screw, M8 x 12 mm. A metric set screw with an integral flange beneath the hexagon head that spreads clamping load and helps resist loo...

Screw - threaded fastener used in vehicle assembly.

Flanged Head Bolt, M8 x 25mm. A hex-head bolt with an integral flange beneath the head that spreads the clamping load and acts as a built-in washer...

Bonnet Release Cable - Second Section for the two-part bonnet-release run. The bonnet release is operated through two linked cable sections. This ...

Bonnet Cable - 1st Half for the Discovery 3 and Range Rover Sport L320 bonnet release system. The bonnet release on these models uses a two-part c...

Fuel Filler Flap Actuator for the fuel filler flap locking mechanism. The actuator drives the fuel filler flap between its locked and released pos...

Anti-Roll Bar Bolt - a chassis fixing bolt in the suspension system, securing the anti-roll (stabiliser) bar to the vehicle structure. It clamps t...

Screw - a general fixing screw used at several mounting points across the driveline and body, including transmission and transfer case mountings, t...

Tailgate Lock Actuator for the upper tailgate, part of the rear luggage compartment locking system. The actuator drives the upper tailgate latch t...

Tailgate Lock Actuator - Upper

Actuator