Products

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Inlet Valve for the cylinder head valvetrain on 2.7, 3.0 TDV6 and 3.6, 4.4 TDV8 diesel engines. The inlet valve seats in the cylinder head and con...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Oil Filter for the 2.7L TDV6 diesel engine, part of the engine lubrication circuit. A paper-element filter that removes wear particles and contami...

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

Coolant Connecting Tube - rigid coolant transfer pipe located at the thermostat housing within the engine cooling system of the 2.7L TDV6 diesel en...

Oil Pump Gasket for the engine lubrication system on Td6 2.7 and 3.0 diesel engines. The gasket seals the oil pump housing to the engine block, pre...

Oil Filter Cover - cap that closes the oil filter housing within the lubrication system of the 2.7L TDV6 diesel engine. The cover retains the repl...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Exhaust Gasket for the TDV6 2.7L V6 diesel engine. Seals the joint between the exhaust manifold and the cylinder head, preventing exhaust gas leaka...

EGR Outlet Pipe Gasket for the Exhaust Gas Recirculation system on the TDV6 2.7L diesel engine. This gasket seals the joint between the EGR outlet...

Cylinder Head Bolt for the cylinder head assembly on TDV6 and TDV8 diesel engines. The bolt secures the cylinder head to the engine block, clamping...

Auxiliary Belt Support Bracket for the serpentine drive belt system on TDV6 2.7L and 3.0L diesel engines in vehicles without Roll Stability Control...

Exhaust Manifold Gasket for the TDV6 2.7L and 3.0L diesel engine. This gasket seals the joint between the exhaust manifold and the cylinder head. ...

Valve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...

Thermostat O-Ring for the TDV6 diesel engine. This O-ring provides the coolant seal at the thermostat housing on TDV6 diesel engines, preventing c...

EGR Gasket for the 2.7L TDV6 diesel engine (140kW). This gasket seals the Exhaust Gas Recirculation (EGR) system connections in the engine, preven...

EGR Cooler - heat exchanger in the exhaust gas recirculation system of the 2.7L TDV6 diesel engine. The cooler lowers the temperature of recircula...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Manifold Pipe for the 2.7L TDV6 diesel engine. This pipe is part of the manifold assembly on the 2.7 TDV6 diesel engine. Replacement is required w...

Oil Temperature Sender located in the engine sump, for the 2.7L TDV6 and 3.6L TDV8 diesel engines. This sender monitors engine oil temperature and...

Engine Oil Sump for the 2.7 TDV6 diesel engine. The sump forms the lower section of the crankcase and houses the oil reservoir from which the oil p...

Sump Gasket 2.7 - TDV6

Fuel Leak Off Pipes (Without Fuel Temperature Sensor)

Injector Retaining Bolt - M6 x 35 mm clamp bolt in the fuel injection system of the V6 and V8 diesel engines. The bolt secures the injector hold-d...

Cap Fuel Rrsport, Rrevo - Discovery 3, Discovery 4

Seal Valve Stem - Retainer Valve Spring

Coolant Outlet Gasket for the engine cooling system, sealing the coolant outlet flange where it joins the engine on V8 applications. The gasket fo...

Crankshaft Oil Seal – Rear seals the rear of the crankshaft where it exits the cylinder block, retaining engine oil at the crankshaft-to-transmissi...

Thermostat Housing Gasket in the engine cooling system. This 37 mm gasket seals the joint between the thermostat housing and the engine on AJ-V8 4...

Timing Cover Seal for the AJV8 petrol engine - a rubber seal fitted to the timing gear cover. It seals the timing gear cover against the cylinder ...

Water Pump in the engine cooling circuit, for AJ-V8 4.4L and 4.2L Supercharged petrol engines. This pump circulates coolant through the engine blo...

Water Pump Gasket

Head Gasket - V8 - LH seals the left-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between ...

Sender Assembly

Exhaust Valve for the AJV8 petrol engine, fitted in the cylinder head valvetrain. It opens to release combustion gases into the exhaust port and s...

Crankshaft Pulley Bolt for the AJ-V8 petrol engine. It secures the crankshaft pulley and torsional vibration damper to the nose of the crankshaft, ...

Ignition Coil for the AJ-V8 petrol engine. This coil is of the coil-on-plug type, fitted one per cylinder, mounting directly over the spark plug to...

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Vent Panel Stud Bolt for the dashboard air vent panel assembly on Land Rover Defender without air conditioning. This stud bolt secures the dash ve...

Trim Rivet, an 8 x 20mm plastic drive (pin-type) rivet used to secure trim panels and mouldings to the body, typically wheel arch trims, bumpers an...

Fuel Filler Door Latch Bezel is the trim surround that locates and frames the fuel filler flap latch within the fuel filler housing. It seats in t...

Fuel Filler Bezel - trim bezel for the fuel filler door. Surrounds the fuel filler recess, providing a finished trim edge around the fuel tank fil...

Screw - No. 10 x 1 in. Secures the instrument binnacle cowl and interior air-deflector trim. Sized for self-tapping installation into moulded trim...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...