Products

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Cap Fuel Rrsport, Rrevo - Discovery 3, Discovery 4

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Rear Anti-Roll Bar Link connects the rear anti-roll bar (stabiliser bar) to the suspension. The link transfers load between the anti-roll bar and ...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Camshaft Cover Gasket Set

Oil Filter Combination Spanner is a service tool for the cartridge oil filter housing, sized 27mm to fit the filter cap. It engages the 27mm cap o...

Capture the sleek design of the Range Rover Evoque with this premium 1:76 scale diecast model in elegant Baltic Blue. This detailed replica perfect...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Piston - 0.50 mm Oversize for the 2.0-litre Ingenium (AJ200D / 204DTD) diesel engine. An engine-rebuild piston machined 0.50 mm over the standard ...

Gear Shift Module (GSM) Tester is a diagnostic and repair tool for the rotary gear selector module. The plastic fastener inside the GSM is prone to...

Front Brake Disc - cross-drilled and grooved - for the front axle braking assembly. The drilled holes and machined grooves across the friction face...

This Filter Service Kit is designed for the 2.2 Diesel engine in Discovery Sport and Range Rover Evoque models equipped with a Diesel Particulate F...

Rear Crankshaft Oil Seal Fitting Tool guides and aligns the rear main crankshaft oil seal into its housing during engine rebuild work, part of the ...

Hex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...

DA1216HD Freelander 2 (4WD): fits All 4WD Freelander2 Range Rover Evoque (Early/Haldex): Efficient Driveline (Haldex) Evoque tot DH999999 (or EH000...

Die-cast scale model of the Range Rover Evoque Coupé (2-door) in white, at 1:24 scale. Finished in die-cast metal with a detailed interior and ope...

Steering Rack

Piston in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The piston runs in the cylinder bore and transfers combust...

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...

Connecting Rod Bearing Set in standard size for the Ingenium AJ200 / AJ204 2.0L diesel engine in its lower-output form (150 hp and 180 hp). The be...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 180 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 240 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Rear brake discs, supplied as a matched pair for the rear axle. The disc provides the friction surface of the rear braking assembly: it is mounted...

Dog guard - a half-height black mesh barrier that separates the load space from the rear passenger compartment. The guard locates against the exis...

Dog guard, upper half - a half-height black mesh barrier that separates the load space from the rear passenger compartment. The guard locates agai...

Gasket - 2.0tcie Head No Set-H

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Cap - Expansion Tank

Temperature Sensor

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Coolant Hose - EGR cooler to heater inlet hose. Carries coolant from the EGR cooler outlet to the heater matrix inlet, linking the exhaust gas rec...

Exhaust Gasket for the flanged joint between the exhaust front pipe and the catalyst section. It seals the bolted flange where the front pipe meet...

EGR Valve Gasket

Front suspension bump stop - part of the front strut and coil spring assembly. The moulded rubber bump stop is fitted over the strut piston rod, b...

Rear suspension arm bush, fitted at the front mounting position of the rear suspension arm. The bush forms the pivot between the suspension arm an...

Valve Stem Seal - valve train sealing component in the cylinder head of the 2.2L Td4 diesel engine. The seal fits over the valve stem at the top o...

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...

Wheel Nut for securing an alloy road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting face, providing...

Wheel Nut with a black finish, for securing a road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting f...

Clutch Master Cylinder Seal - the O-ring that seals the clutch master cylinder within the clutch hydraulic circuit. It maintains the hydraulic sea...

Front Axle Output Seal - RH Outer - the outer oil seal on the right-hand output of the front axle case. It seals around the differential output fl...