Products

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Exhaust Manifold Gasket for the TDV6 2.7L and 3.0L diesel engine. This gasket seals the joint between the exhaust manifold and the cylinder head. ...

Valve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Battery - Wet Non-Spillable for the vehicle electrical system. It is a flooded (wet) lead-acid battery of sealed, non-spillable construction. It su...

Hood Latch for the bonnet closing mechanism. The latch is body-mounted and engages the bonnet striker to hold the bonnet shut, releasing when the ...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

High-Tensile Hexagon-Head Bolt - an imperial 7/16" UNF fixing bolt, 2-1/2" long, in high-tensile grade. A general-purpose hex-head fastener with a...

Panhard Rod Bolt with a 1/2" UNF (Unified National Fine) imperial thread and a 3-1/4" shank length, manufactured to a high-tensile grade. Secures ...

Firtree Clip - a push-in fastener with a ribbed, fir-tree profile that grips into a pre-drilled panel hole. Used to secure trim panels, wiring loo...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Range Rover Velar SE Scale Model - a 1:76 scale diecast model of the Range Rover Velar SE, finished in Fuji White. The model reproduces the Velar ...

Piston - 0.50 mm Oversize for the 2.0-litre Ingenium (AJ200D / 204DTD) diesel engine. An engine-rebuild piston machined 0.50 mm over the standard ...

Rear Crankshaft Oil Seal Fitting Tool guides and aligns the rear main crankshaft oil seal into its housing during engine rebuild work, part of the ...

Brake Hose Clip in the brake hydraulic circuit, securing a flexible brake hose to its mounting bracket where the hose crosses from the chassis to a...

Piston in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The piston runs in the cylinder bore and transfers combust...

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 180 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 240 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Dog guard - a half-height black mesh barrier that separates the load space from the rear passenger compartment. The guard locates against the exis...

Gasket - 2.0tcie Head No Set-H

Piston assembly - piston for the AJ133 5.0L supercharged V8 petrol engine, in the standard (nominal production) bore size. The piston runs in the ...

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Wheel Nut for securing an alloy road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting face, providing...

Wheel Nut with a black finish, for securing a road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting f...

Upper Sump Gasket seals the upper oil sump section against the cylinder block within the engine lubrication system. It provides an oil-tight seal ...

Throttle Housing Seal for the 2.7L TDV6 and 3.0L SDV6 diesel engines, sealing the throttle body to the air intake. The seal sits between the throt...

Oil Cooler Assembly - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the coole...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Cam Cover Gasket seals the left-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint around...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Cam Cover Gasket seals the right-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint aroun...

Spark Plug Well Gasket seals the spark plug aperture in the camshaft (valve) cover on the right-hand cylinder head bank. It prevents engine oil fr...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...