for Discounts / VAT
for Discounts & Correct VAT
Exhaust Manifold Spacer is a mounting component in the exhaust manifold assembly. It sets the correct standoff at the exhaust manifold joint, main...
View full detailsCrankshaft Thrust Washer locates within the crankshaft main bearing assembly, seating at the thrust main bearing journal. It controls crankshaft e...
View full detailsFront Crankshaft Oil Seal seated in the engine front (timing) cover, sealing the crankshaft nose where it exits the crankcase. The seal runs again...
View full detailsFront Crankshaft Oil Seal seated in the engine front (timing) cover, sealing the crankshaft nose where it exits the crankcase. The seal runs again...
View full detailsPTFE Split Seal - a split polytetrafluoroethylene sealing ring used in the variable cam timing (VCT) gear of the AJ-series V8 petrol engine. The s...
View full detailsInlet Valve for the cylinder head valvetrain on 2.7, 3.0 TDV6 and 3.6, 4.4 TDV8 diesel engines. The inlet valve seats in the cylinder head and con...
View full detailsValve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...
View full detailsBolt - Exhaust Manifold & EGR - a fixing bolt used in the exhaust manifold and exhaust gas recirculation (EGR) assembly of the TDV6/TDV8 diesel...
View full detailsValve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...
View full detailsGlow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...
View full detailsGlow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...
View full detailsExhaust Manifold Stud for TDV6 2.7 and 3.0 and TDV8 3.6 diesel engines, used to fasten the exhaust manifold to the cylinder head. On 2.7 TDV6 engi...
View full detailsBolt, M8 thread x 30mm length. A threaded fastener used to secure components within the vehicle assembly. In the M8 x 30 designation, M8 is the no...
View full detailsTiming Chain is part of the timing drive on the 3.6L V8 diesel (TDV8) engine. It transmits drive from the crankshaft to the camshafts, keeping val...
View full detailsTiming Chain Guide for the TDV8 3.6 diesel engine, fitted within the timing chain assembly. The guide rails the timing chain as it runs between the...
View full detailsTiming Chain Tensioner Arm is part of the timing drive on the 3.6L V8 diesel (TDV8) engine. The arm bears against the timing chain on its slack si...
View full detailsBolt - Special is an M22 metric timing gear bolt used in the engine timing gear assembly. This special bolt secures components within the timing g...
View full detailsTube for use in the engine assembly.
Cylinder Head Gasket (Right-Hand Bank) seals the joint between the right-hand cylinder head and the engine block on the 3.6L V8 32-valve diesel (Li...
View full detailsCylinder Head Gasket - LH seals the left-hand cylinder head to the engine block on the 3.6L V8 32-valve diesel (Lion TDV8) engine. It sits between...
View full detailsCylinder Head Gasket - LH seals the left-hand cylinder bank of the TDV8 3.6L V8 Turbo Diesel engine. This head gasket forms the combustion seal be...
View full detailsCylinder Head Gasket - LH - Grade 5 seals the left-hand cylinder head to the engine block on the 3.6L V8 32-valve diesel (Lion TDV8) engine. It si...
View full detailsCylinder Head Gasket - LH - Grade 5 seals the left-hand cylinder head to the engine block on the 3.6L V8 32-valve diesel (Lion TDV8) engine. It si...
View full detailsExhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head on the TDV8 3.6L V8 Turbo Diesel engine. This gasket pr...
View full detailsOil & Water Temperature Sensor threads into the engine and reports lubricant or coolant temperature to the engine management system and the ins...
View full detailsFuel Tank Filler Cap Assembly for the fuel tank filler neck. It seals the filler neck to contain fuel vapour and maintain the sealed pressure of t...
View full detailsSplit Pin Assortment A 280-piece assortment of split pins (cotter pins) in a range of sizes, supplied as a workshop set. Split pins secure castell...
View full detailsChain Timing
Timing Chain – Upper is the upper section of the timing drive on the AJV8 petrol engine, transmitting drive from the crankshaft sprocket to the cam...
View full detailsTiming Chain Tensioner maintains correct tension on the timing chain of the 4.4 AJV8 petrol engine, taking up slack as the chain wears to hold accu...
View full detailsTiming Chain Tensioner - Lower in the timing chain drive of the AJ-V8 petrol engine (4.4L and 4.2L supercharged). It maintains correct tension on ...
View full detailsCoolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...
View full detailsCoolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...
View full detailsCrankshaft Oil Seal – Rear seals the rear of the crankshaft where it exits the cylinder block, retaining engine oil at the crankshaft-to-transmissi...
View full detailsO-Ring A 53mm-diameter sealing O-ring for the thermostat housing in the engine cooling circuit. It seals the thermostat housing joint against cool...
View full detailsO-Ring A 53mm-diameter sealing O-ring for the thermostat housing in the engine cooling circuit. It seals the thermostat housing joint against cool...
View full detailsThermostat Housing Seal for the engine cooling system, sealing the thermostat housing joint. Fitted between the thermostat housing and its mating ...
View full detailsCamshaft Sensor monitors camshaft position on the AJV8 petrol engine, providing the reference signal the engine management system uses to control i...
View full detailsCamshaft Position Sensor reports camshaft position on the AJV8 petrol engine to the engine management system, providing the timing reference for ig...
View full detailsFuel Pressure Sensor A sensor in the fuel injection system that measures the pressure of the fuel delivered to the injectors and reports it to the ...
View full detailsTiming Chain Tensioner – Secondary (RH Upper) maintains tension on the secondary timing chain for the right-hand cylinder bank of the 4.4 V8 AJ pet...
View full detailsTiming Chain Tensioner – Secondary (LH Upper) maintains tension on the secondary timing chain for the left-hand cylinder bank of the 4.4 V8 AJ petr...
View full detailsMain Bearing Blue Upper
Bearing - Crankshaft Main
Bearing - Crankshaft Main
Connecting Rod Bearing – Blue is a big-end bearing shell for the connecting rod of the 4.4 V8 AJ petrol engine, carrying the rod on the crankshaft ...
View full detailsConnecting Rod Bearing – Green is a big-end bearing shell for the connecting rod of the 4.4 V8 AJ petrol engine, carrying the rod on the crankshaft...
View full detailsConnecting Rod Bearing – Yellow is a big-end bearing shell for the connecting rod of the 4.4 V8 AJ petrol engine, carrying the rod on the crankshaf...
View full details