Products

Glovebox Damper is the damper assembly for the glovebox lid. It controls the opening motion of the glovebox, slowing the lid as it drops so it low...

Plain Washer M8

Locking Wheel Nut Set - a set of four keyed security nuts, one per wheel, fitted in place of a standard wheel nut to deter theft of the road wheels...

Locking Wheel Nut Set for alloy wheels, comprising four locking nuts that replace standard wheel nuts to deter wheel theft. Thread size 16 x 1.50;...

Fitting Kit for Pacet Fan

Thermostat Kit for Electric Fan Kenlowe

Dog Guard Kit installs behind the rear seats to separate the load area from the passenger cabin, keeping pets and shifting luggage out of the occup...

Differential Guard - a wrap-around steel guard that shields the front or rear differential housing from impact and debris during off-road use. Des...

Battery Isolator Switch - key-operated master cut-off switch for the vehicle electrical system, rated at 300A. Wired inline on the main battery le...

Steering Wheel Boss - the mounting hub that adapts an aftermarket steering wheel to the steering column splines. Compatible with the BA 150 and BA...

Seat belt SECURICON

Rock Sliders

Rock guards, rock sliders (pair) galvanised. Fits Discovery 1 and Range Rover Classic (except LSE)

Rear Coil Spring for the rear suspension, a heavy-duty rating that raises ride height by approximately 40mm over standard. The increased free leng...

Rear Coil Spring for the rear suspension, raising ride height by approximately 40mm over standard. Wound from 18mm wire with a free height of 445m...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Brake Hose Kit - Stainless Steel

Shock Absorber - Rear - Gas

Shock Absorber - a gas-charged front damper for the suspension. Fitted between the front axle and the chassis, it damps the motion of the road spr...

Air Ram - the forward-facing intake head of a raised air intake (snorkel) system, in 3" diameter. Mounted at the top of the snorkel body, it draws...

Raised Air Intake Mantec - 90/110 200TDi

Front Twin Shock Tower (Pair) - an uprated front shock absorber mounting set for coil-sprung suspension that allows a second shock absorber to be f...

Wading Kit for the drivetrain and engine breather system, extending the breather points of the axles, gearbox and engine to a higher level. Raisin...

Front Spring - +50mm - Off-Road - Pair is a pair of front coil springs for the front suspension, wound to a raised free length that lifts the front...

Rear Coil Spring - part of the rear suspension, supporting the vehicle weight and setting ride height at the rear axle. Uprated to give a +50mm ra...

Synthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...

Waterproofing Kit - V8 seals the ignition system of the V8 petrol engine against water and damp. The kit waterproofs the distributor and ignition ...

Haynes Range Rover Classic repair manual

Spring Retaining Plate Front coil spring retaining plate that clamps over the top of the spring at its seat, holding the spring captive so it canno...

Gear Knob - Aluminium - LT77/LT85 is a machined aluminium gear knob for the main gear lever. It threads onto the gear lever of the LT77 and LT85 m...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Shock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...

rock slider, rock guards (pair) BA 2091 Generic picture, the set supplied is BLACK coated, NOT galvanised.

Front Coil Springs - heavy-duty road springs for the front axle, supplied as a pair. The springs seat between the front axle and the chassis sprin...

Steering Box Oil Seal Oil seal for the input (worm) shaft of the manual, non-power (Gemmer) steering box, sealing around the shaft where it enters ...

Seal Washer - Turbocharger Copper sealing washer for the turbocharger oil feed circuit. It seals the banjo union on the turbocharger's oil supply ...

Blanking Plug - plastic plug sealing a 1-1/4" (32mm) diameter aperture in the rear cross member. Installs into unused or access holes in the bodys...

Door Check Pin - the pivot pin that retains the door check link (check strap) to its mounting bracket on the body pillar. The check link limits ho...

Door Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...

Jet windscreen wash RRclassic 1986 - 1991

Anti-Rattle Clip secures the linkage rod within the door latch and lock mechanism. It retains the lock linkage rod at its connection point, holdin...