Products

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Crankshaft Spigot Bush is the clutch pilot bush that presses into the rear face of the crankshaft, between the engine and the clutch. It supports ...

Crankshaft Spigot Bush is the clutch pilot bush that presses into the rear face of the crankshaft, between the engine and the clutch. It supports ...

Inlet Valve for the cylinder head valvetrain of the Rover V8 petrol engine (3.5L, 3.9L, 4.0L and 4.6L variants). It seats in the cylinder head inl...

Exhaust Valve for the Rover V8 EFI petrol engine, fitted in the cylinder head valvetrain. The valve seals the exhaust port during the combustion c...

Valve Guide for the cylinder head of the 2.5L 200 TDi and 300 TDi diesel engines. The valve guide is pressed into the cylinder head and locates th...

Valve Guide for the cylinder head valve train of the Rover V8 petrol engine. The guide is an interference fit in the cylinder head and locates the...

Valve Guide for the cylinder head valve train of the Rover V8 petrol engine. The guide is an interference fit in the cylinder head and locates the...

Crankshaft Pulley for the 300 TDi 2.5L 4-cylinder turbo diesel, mounted on the nose of the crankshaft at the front of the engine. The pulley trans...

Valve Stem Cap is a hardened cap that sits over the tip of the valve stem in the cylinder head valve train. It forms the wear interface between th...

Valve Stem Cap is a hardened cap that sits over the tip of the valve stem in the cylinder head valve train. It forms the wear interface between th...

Valve Stem Cap is a hardened cap that sits over the tip of the valve stem in the cylinder head valve train. It forms the wear interface between th...

Inlet Manifold Gasket for the V8 petrol engine, forming the seal between the central inlet manifold casting and the cylinder head intake faces. It...

Non-Return Valve for the V8 petrol engine, fitted to the inlet manifold vacuum take-off. The valve allows air to be drawn one way from the vacuum ...

Crankcase Breather Hose forms part of the closed crankcase ventilation circuit, connecting the rocker cover breather outlet to the intake manifold ...

Breather Hose for the 300 TDi crankcase ventilation system. The hose carries crankcase breather (blow-by) gases from the engine breather outlet ba...

Breather Hose for the 300 TDi crankcase ventilation system. The hose carries crankcase breather (blow-by) gases from the engine breather outlet ba...

Oil Separator Drain Hose for the 300 Tdi 2.5L 4-cylinder turbo diesel engine, part of the crankcase ventilation system. It returns the oil collect...

Breather O-Ring for the 2.5L diesel engine (NA Diesel, 200 TDi and 300 TDi), used in the crankcase ventilation system. It seals the cyclone breath...

Reverse Lamp Bulb - a 21W 12V single-filament incandescent bulb (type P21W) with a BA15s single-contact bayonet cap, fitted to the rear lamp assemb...

Blade Fuse rated at 10 A, colour-coded red to match its rating. This standard automotive blade fuse plugs into the vehicle fuse box and protects it...

Brake Light Switch operates the stop lamps within the braking system's electrical circuit. Mounted at the brake pedal, the switch closes when the ...

Brake Light Switch operates the stop lamps within the braking system's electrical circuit. Mounted at the brake pedal, the switch closes when the ...

Brake Light Switch operates the stop lamps within the braking system's electrical circuit. Mounted at the brake pedal, the switch closes when the ...

Brake Light Switch mounted at the brake pedal. Operated by the brake pedal, this switch signals the stop lamps to illuminate when the brakes are a...

Front door window regulator forming part of the door glass operating assembly, responsible for controlled raising and lowering of the electric wind...

Front door window regulator assembly for left-hand front door applications within the door glass operating mechanism. This component forms part o...

Clutch Kit is a matched three-piece clutch assembly for the 2.5L 200TDi and 300TDi turbo diesel engines with manual transmission. The kit renews t...

Clutch Kit is a matched three-piece clutch assembly for the 3.5L V8 petrol engine with manual transmission. The kit renews the complete clutch as ...

Clutch Kit is a matched three-piece clutch assembly for the 3.5L V8 petrol engine with manual transmission. The kit renews the complete clutch as ...

Stud M8 x 25

Stud

Wheel Wrench a 27mm wheel brace for loosening and tightening wheel nuts. The 27mm socket end matches the wheel nuts fitted to the applicable vehic...

Wheel Wrench a 27mm wheel brace for loosening and tightening wheel nuts. The 27mm socket end matches the wheel nuts fitted to the applicable vehic...

Wheel Wrench a 27mm wheel brace for loosening and tightening wheel nuts. The 27mm socket end matches the wheel nuts fitted to the applicable vehic...

Spring bonnet pull cable return

Differential Flange Mud Shield - a protective shield fitted at the differential pinion drive flange. It sits behind the drive flange, where the pr...

Brake Disc - Solid - Front is the front brake disc, mounting to the wheel hub and providing the friction surface the brake pads clamp against durin...

Front Brake Disc - Solid, supplied as a pair. Solid (non-ventilated) front brake discs for the front axle brake assembly. Each disc mounts to the ...

Front Brake Disc - Solid, Cross-Drilled and Grooved. Solid (non-ventilated) front brake disc with a cross-drilled and grooved friction face. The d...

Brake Disc - Solid - Front is the front brake disc, mounting to the wheel hub and providing the friction surface the brake pads clamp against durin...

Front Brake Disc - Ventilated, supplied as a pair. Ventilated front brake discs for the front axle brake assembly. Internal vanes between the two ...

Front Brake Disc - Ventilated, Wavy, Cross-Drilled and Grooved. Ventilated front brake disc with a wavy outer profile and a cross-drilled and groo...

Brake Disc - Rear - Solid - Pair is a matched pair of solid (non-vented) discs forming the friction surfaces of the rear disc brake assembly. Each...

Rear Brake Disc, cross-drilled and grooved. Fitted to the rear axle. The cross-drilling and grooving help clear gas, dust and water from the pad c...

Brake Disc - Rear - Wavy CDG is a rear brake disc with a wavy (scalloped) outer profile and cross-drilled, grooved friction faces. It replaces the ...

Rear brake shield RH