Products

Cigar Lighter Base - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor console and...

Thermostat Housing Gasket for the engine cooling system. It seals the joint between the thermostat housing and the engine, containing coolant and ...

Rocker Arm for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It transfers camshaft lobe motion to the valve, opening it ...

Rocker Arm for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It transfers camshaft lobe motion to the valve, opening it ...

Valve Tappet for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It provides the pivot for the rocker arm and takes up cle...

Timing Belt for the 2.2L DW12 Td4 diesel engine - the toothed belt that drives the camshafts from the crankshaft, keeping valve and piston movement...

Sump Drain Plug for the 2.2L DW12 Td4 diesel engine oil pan. Threaded into the base of the sump, it is removed to drain the engine oil during a se...

Bolt securing a rear suspension arm to the rear knuckle. M14 x 75mm with a Torx head.

Cylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...

Ashtray in Ebony Black for the centre floor console. The ashtray is a removable insert that locates in the console cubby box.

Inlet Manifold Gasket Kit - gasket set for the inlet (intake) manifold of the 2.2L TD4 diesel engine. Renews the sealing between the inlet manifol...

sensor exhaust gas 2.2L CR DI 16V Diesel OEM Autotec

Sensor Assembly - Lambda

Transmission Drain Plug for the automatic transmission. Seals the fluid drain point on the AWF21 6-speed automatic transmission. Removed to drain ...

Bolt for the exhaust system front section. This fastener secures the flanged joint between the exhaust manifold and the front pipe section, holdin...

Flywheel Drive Plate for automatic transmission applications. This drive plate bolts to the engine crankshaft and couples it to the torque convert...

Oil Filler Cap for the 2.2L diesel engine. It seals the oil filler aperture, closing the crankcase to prevent oil loss and contamination during en...

Oil Filter Housing Cover for the oil cooler and filter housing on the 2.2L DW12 turbo-diesel engine. The cover closes the oil filter housing, reta...

Sump Plug Washer is the sealing washer for the engine oil sump drain plug. It seats between the drain plug and the sump pan to form a leak-tight s...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Oil Cooler Return Connector is a connector fitting in the engine oil cooler circuit of the 2.2L diesel engine (DW12). It joins the oil cooler retu...

Bumper Retainer Nut - a push-in retaining nut used in the front bumper, radiator grille and rear bumper assemblies. The retainer clips into a pres...

Coolant Temperature Sensor for the 2.2L DW12 common-rail diesel engine (Td4/SD4), mounted in the thermostat housing. The sensor is a thermistor si...

Disc Brake Front Frl2, Evoque

Front Brake Discs - 300 mm vented, supplied as a pair. The vented construction carries internal vanes between the two friction faces, drawing air ...

Coated Brake Disc

Front Brake Discs - 300 mm vented, cross-drilled and grooved, supplied as a pair. The vented construction carries internal vanes between the two f...

Brake Disc

Brake Disc - Front Brakes - Vented

Front Brake Disc - 300 mm vented, supplied singly; two are required to do the front axle. The vented construction carries internal vanes between t...

Starter Motor - starting motor for the 2.2L CR DI 16V turbo diesel (DW12 / TD4), part of the engine starting system. When energised by the starter...

Haldex Coupling Seal Kit - the oil seal kit for the rear-axle Haldex coupling on all-wheel-drive models. Renews the fluid seals of the Haldex coup...

Haldex Coupling Seal Kit - the oil seal kit for the rear-axle Haldex coupling on all-wheel-drive models. Renews the fluid seals of the Haldex coup...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Gasket polygon shape type. cover

Gasket - Cylinder. Head Front Cover

Gasket round shape type, cover

Gasket - Cylinder. Head Front Cover

Gasket Kit

Front spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...