for Discounts / VAT
for Discounts & Correct VAT
Parts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
Piston ring set 2.25 petrol .020"" (per zuiger)
Rear Clear Light Kit upgrades the rear exterior lighting to clear (crystal) lenses. The kit comprises two clear rear indicator lamps, one reversin...
View full detailsFront Clear Light Conversion Kit upgrades the front exterior lighting to clear (crystal) lenses in the indicator and side-light positions. The kit...
View full detailsAmber Upgrade Lamp is a direct-fit exterior lamp unit with an amber lens, used in the indicator and side-marker positions of the round lamp lightin...
View full detailsIn/Out Member
Flywheel Locking Pin is a workshop special tool used to lock the flywheel when setting the diesel injection pump timing on the 200TDi and 300TDi en...
View full detailsTransfer Box Cross Pinion Shaft - the cross shaft for the centre differential inside the transfer box. The differential pinion (spider) gears rotat...
View full detailsStainless Steel Side Intake A stainless steel air intake grille for the front wing, right-hand side, covering the wing-top intake aperture that adm...
View full detailsLevery assy
Main Bearing Set for the 2.25L 4-cylinder petrol and diesel engine, supplied in 0.020" undersize. The main bearings are the replaceable shell bear...
View full detailsGear Knob - Aluminium - LT77/LT85 is a machined aluminium gear knob for the main gear lever. It threads onto the gear lever of the LT77 and LT85 m...
View full detailsSpring Band Hose Clip for the cooling and heater hose connections. This self-tensioning spring band clip secures a coolant or heater hose onto its...
View full detailsLoad Area Protection - a protective covering for the rear load area that shields the load floor from abrasion and impact. It takes the wear of car...
View full detailsMainshaft - LT95 is the main output shaft of the LT95 four-speed gearbox. It carries the speed gears and synchroniser hubs along its splines, tran...
View full detailsFuel Filler Extension Tube connects the fuel filler neck to the fuel tank. It forms part of the fuel filler assembly, carrying fuel from the fille...
View full detailsFuel Tank Plate is a steel plate used in the installation of the auxiliary (extra) fuel tank fitted to Station Wagon applications. It forms part o...
View full detailsDoor Check Retainer is the lever-type retaining component of the rear door check mechanism. It holds the door check assembly in position and works ...
View full detailsSpotlight Bar - Without Lights is a roof-mounted bar for carrying auxiliary driving and spot lamps. It fixes across the front of the roof on four ...
View full detailsAir Filter - Performance - EFI V8 is a clamp-on performance air filter for the intake of the V8 EFI petrol engine. It replaces the standard airbox...
View full detailsSill Protector is an aluminium 5-bar chequer plate guard that protects the sill panel beneath the doors from stone chips, scuffs and impact damage....
View full detailsWing Protector is a 3mm aluminium chequer plate that protects the top of the rear wing from scuffs, dents and loading damage. It covers the upper ...
View full detailsCylinder Head for the 2.5L 4-cylinder diesel engine, forming the upper sealing face of the combustion chambers and carrying the valve seats, ports ...
View full detailsLocking Wheel Nut Key, the keyed adaptor used to remove and refit locking wheel nuts. The key is placed over the locking nut and driven with a sta...
View full detailsFront Floor Panel is a footwell floor repair section for the body's front floor assembly. It replaces the corroded or damaged front floor panel on...
View full detailsFront Floor Panel is a footwell floor repair section for the body's front floor assembly. It replaces the corroded or damaged front floor panel on...
View full detailsRear Trailing Link Bracket - left-hand chassis bracket in the rear suspension. The bracket provides the chassis mounting point for the rear trailin...
View full detailsSealing Washer for the oil pump of the automatic transmission. It seals the oil pump's pressure circuit within the automatic transmission, maintai...
View full detailsRear Door with Heated Glass - the side-hinged rear door for the Station Wagon (Safari) body, fitted with a heated glass window. The door closes the...
View full detailsAutomatic Gearbox Extension Housing Gasket for the rear extension housing of the automatic transmission. It forms the fluid-tight joint where the ...
View full detailsInner Wing - right-hand inner wing panel. The inner wing forms the structural side of the engine bay and front wheel arch, supporting the outer win...
View full detailsOuter Wing - left-hand front outer body panel with the turbo intercooler aperture. The outer wing forms the visible outer skin over the front wheel...
View full detailsABS Modulator Bracket Assembly for the anti-lock braking system in left-hand-drive configuration. The bracket mounts the ABS modulator (hydraulic ...
View full detailsMain Bearing Kit for the 2.5L 4-cylinder petrol and naturally aspirated diesel engine, supplied in 0.030" oversize. The main bearings are the repl...
View full detailsMain Bearing Set for the 2.25L 4-cylinder petrol and diesel engine, supplied in 0.030" oversize. The main bearings are the replaceable shell beari...
View full detailsCable assembly accelerator, 4.0L V8 EFI PETROL, 50 LE
Seat Cover in the Dakar style, finished in black and beige. It fits over the vehicle seat to protect the original upholstery.
Stainless Steel Switch Panel A stainless steel switch panel for the interior dashboard, providing mounting locations for auxiliary and accessory sw...
View full detailsBulkhead Diaphragm Panel forms part of the bulkhead assembly, closing and sealing the diaphragm and transmission tunnel area between the engine bay...
View full detailsPower Steering Hose is the low-pressure return line within the power steering hydraulic circuit. It returns fluid from the steering box back to th...
View full detailsRadiator Top Hose for V8 petrol applications, part of the engine cooling circuit. The top hose carries hot coolant from the engine outlet to the t...
View full detailsOil Cooler Pipe carries engine oil between the engine and the oil cooler, forming part of the lubrication cooling circuit. It routes pressurised o...
View full detailsAluminium Decal - 15cm nameplate for the exterior body. This aluminium nameplate measures 15cm in length and is applied to the exterior body as a ...
View full detailsPower Steering Elbow Pipe - rigid fluid pipe within the power steering hydraulic circuit. The pipe carries hydraulic fluid between the power steer...
View full detailsSelf Levelling Unit Spring Ring - retaining ring for the rear self-levelling suspension unit. The ring seats on the self-levelling unit and locate...
View full detailsPower Steering Pipe - Box to Reservoir is the low-pressure return pipe in the power-assisted steering hydraulic circuit, carrying fluid from the st...
View full detailsRear Seat Locating Stop for the rear seat base, setting the seat's mounted position. The stop locates the rear seat onto its base mounting and lim...
View full detailsOil Thrower for the Rover 3.5L V8 crankshaft assembly. This pressed-steel disc fits to the crankshaft and rotates with it, using centrifugal force...
View full detailsToe Box Cover for the front footwell, covering the toe box section of the floor where it meets the lower bulkhead. This pressed panel encloses the...
View full detailsParts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
This collection covers the classic Land Rover Defender produced from 1983 to 2016, in three body lengths: the 90 (short wheelbase), the 110 (long wheelbase), and the 130 (crew cab and high-capacity load variants). These span two platform designations. L315 refers to the earlier platform in use from 1983. L316 refers to the revised platform introduced in the early 1990s and used through to final production in January 2016.
This collection does not cover the current-generation Defender L663, introduced in 2020. Parts for the L663 are held separately under Land Rover Defender parts.
Engine FamiliesFour diesel engine families account for the majority of classic Defender rebuilds and restorations supported by this collection.
The 200Tdi was introduced in 1990 and produced through to 1994. It is a direct-injection turbodiesel known for mechanical simplicity. Common service and rebuild requirements include the head gasket, water pump, injector seals, and thermostat.
The 300Tdi ran from 1994 to 1998. It uses a belt-driven timing system and a revised cylinder head. Timing belt and water pump replacement is the highest-priority service interval on this engine. Complete timing kit assemblies for the 300Tdi are stocked.
The TD5 ran from 1998 to 2007 and was Land Rover's first electronically managed Defender engine. It introduced an integrated injector harness routed through the rocker cover, a revised fuel delivery system, and full ECU control. Commonly replaced components include the rocker cover gasket, injector harness, and exhaust manifold.
The Puma TDCi variants ran from 2007 to 2016. A 2.4 litre unit was used from 2007 to 2011, replaced by a 2.2 litre unit from 2011 onwards. Common service requirements include EGR components, cooling system parts, and turbo-related items.
Defenders built before 1990 and fitted with earlier units including the 2.25 petrol, 2.5 normally-aspirated diesel, or V8 petrol are also supported where parts cross-reference with the L315 platform. Use the engine filter or search by OEM part number for these variants.
Engine family production date ranges per Land Rover workshop manual specifications and the Land Rover parts catalogue for L315 and L316 platforms.
Some components differ between the 90, 110, and 130. Propshafts, chassis outriggers, fuel tanks, body tub sections, and wheelbase-specific brackets are body-length dependent. Where a part is specific to one or two body lengths, the product listing states this.
Components that fit across all three body lengths include most engine parts, brake components, axle rebuild kits, and electrical items. No body-length filter is needed for those categories.
Quality TiersParts in this collection are available in three quality tiers, each suited to different rebuild priorities and budgets.
Genuine Land Rover parts are original components produced by or for Land Rover to factory specification. These are the correct choice where an exact factory-spec replacement is required.
OEM-equivalent parts are produced by the original component manufacturer, often the same supplier that produced the part for Land Rover during original production. These offer factory-level quality at a lower price point than branded genuine parts and are widely used in professional workshop settings.
Aftermarket parts are third-party manufactured alternatives. Quality varies by supplier and application. For high-wear consumable items these are frequently a practical and cost-effective choice.
Use the quality filter on the left to narrow results by tier.
VIN LookupThe 17-character VIN on your Defender's identification plate encodes the body variant, engine family, and model year. For any part where fitment is uncertain, the VIN is the most reliable starting point for confirmation.
Budget Parts supports VIN-based fitment enquiries via the contact page. If you are unsure whether a part is correct for your specific Defender, use the part number search or submit an enquiry before ordering.
Related CategoriesSearching for a specific part type rather than browsing the full catalogue? The following collections group classic Defender components by category:
Propshafts, universal joints, and drivetrain rebuild components.
Land Rover driveshaft parts →The most reliable method is the VIN plate, usually found on the driver's side A-post or on a plate inside the door aperture. The engine code within the VIN confirms the engine family. As a general guide based on production dates: the 200Tdi was fitted from 1990 to 1994, the 300Tdi from 1994 to 1998, the TD5 from 1998 to 2007, and the Puma TDCi from 2007 to 2016. Defenders built before 1990 used earlier petrol and diesel units. The engine stamp on the block itself also confirms the variant if the VIN plate is absent or damaged.
No. Classic Defenders use era-specific loom designs that are not interchangeable between engine generations. The TD5 uses a loom that integrates with the ECU and routes the injector harness through the rocker cover, which is incompatible with earlier Tdi wiring architecture. Puma TDCi looms differ again due to the revised engine management system. Always match the loom to both the engine family and body length (90, 110, or 130) when ordering.
Wheelbase-specific components include propshafts, fuel tanks, chassis outriggers, body tub sections, and some bracket assemblies. Most mechanical components are shared across all three body lengths, including engine internals, brake components, axle rebuild parts, and the majority of electrical items. Product listings on this page state body-length fitment where it is relevant.
Some parts do cross-reference between the classic Defender and the Discovery 1, particularly for the 200Tdi engine, which shares components with the Discovery 1 200Tdi unit. Axle components also overlap to a degree between the two platforms. Cross-referencing by part number is essential before ordering, as not all apparently similar parts are dimensionally or functionally interchangeable. Use the part number search or contact Budget Parts with your VIN if you are unsure.
Genuine parts are Land Rover-branded components produced to original factory specification. OEM-equivalent parts are made by the original component supplier, often the same manufacturer that supplied Land Rover during production, and offer comparable quality without the Land Rover brand premium. Aftermarket parts are third-party alternatives that vary in quality by supplier. All three tiers are available in this collection and can be filtered using the quality selector.
The final classic Defender left the Solihull production line in January 2016, marking the end of a model that had been in continuous production since 1983. The current-generation Defender L663 is a separate vehicle on a different platform and is not covered by this collection.
The following guides cover engine-specific maintenance and component topics relevant to the Defender models in this collection. Each article provides detailed technical context and links back to the relevant parts.
A technical reference covering the 300Tdi engine's known weak points, service priorities, and the components most commonly required for a full rebuild or preventive overhaul.
Defender 300Tdi guide →Covers the TD5 exhaust manifold cracking failure in detail, including inspection method, replacement options, and why stud quality matters for a lasting repair.
Td5 exhaust manifold guide →A maintenance and fault reference for the Puma 2.4 TDCi engine fitted to post-2007 Defenders, covering EGR, cooling, and turbo-related service requirements.
Defender 2.4 TDCi guide →