for Discounts / VAT
for Discounts & Correct VAT
Parts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
Connecting Rod for the 200TDi 4-Cylinder Turbo Diesel engine, part of the short engine rotating assembly. The connecting rod links the piston pin ...
View full detailsRear Shock Absorber for the Defender rear suspension assembly, long-wheelbase variants. This telescopic damper mounts between the rear axle and th...
View full detailsNote - For anything post 1993 (300Tdi, Td5 & Puma) you need to change the cable - NRC5088. Puma onwards - modifications may be needed to the ch...
View full detailsRear Step - Folding - a bolt-on step assembly mounted at the rear end of the vehicle, giving a foothold for loading the rear body and for reaching ...
View full detailsLazer ST4 Evolution LED Spotlight - a compact four-LED auxiliary driving lamp producing a controlled long-range beam for forward illumination. The...
View full detailsCoating Spray Gun, bottle-mount type, for applying protective coating. This Schutz-style gun screws directly onto the 750ml coating bottle, so no s...
View full detailsLazer Defender (Pre-2018) Roof Mounting Kit - LED Light Bar Brackets The Lazer Roof Mounting Kit provides a strong and reliable solution for fitti...
View full detailsRear suspension bush kit covering the trailing arm and A-frame mounting points of the rear coil-sprung suspension. The trailing arms locate the re...
View full detailsRubber isolator clamp used in the bonnet-mounted jack bracket assembly to secure the jack beam or handle against the bonnet mounting brackets. The...
View full detailsSide Steps of fixed twin-tube construction in a black finish, with a ribbed rubber tread along the top face for grip underfoot. Supplied as a pair,...
View full detailsFront Axle Panhard Rod Bush - Late Type, for replacement at the Panhard rod mounting point on the front axle assembly. The bush provides the compl...
View full detailsGlow Plug for the 200TDi and 300TDi 2.5-litre direct-injection turbo diesel engines. It forms part of the cold-start pre-heating system. The glow ...
View full detailsSerrated Washer, 7/16", used within the clutch master cylinder and pipe assembly. The serrated face bites into the mating surface as the fixing is...
View full detailsThis clutch kit consists of a clutch cover, driven plate, and release bearing designed to operate together as a complete assembly within a manual t...
View full detailsHeater Control is the dash-mounted control panel for the heating and ventilation (HVAC) system. This is the cable-operated type: the rotary and sl...
View full detailsIdle Adjusting Needle is the mixture-adjusting needle for the Zenith Stromberg CD175 constant-depression carburettor fitted to the Rover 3.5 V8. I...
View full detailsUniversal Joint for wide-angle propshafts - the cross-and-bearing joint that transmits drive along the propshaft while accommodating the operating ...
View full detailsIgnition Wiring Harness - the low-tension (LT) link lead within the V8 petrol ignition system. This harness carries the low-tension (primary) side...
View full detailsSilicone Turbo and Intercooler Hose Kit for the 2.2L TD4 turbo diesel charge-air circuit, covering the hose runs between the turbocharger, the inte...
View full detailsrear output shaft LT95 4-speed gearbox V8 - S3 109" Stage 1 V8 - 101" Forward Control - Range Rover Classic 4-speed V8 - Early 110" 4-speed V8
Soft Top Drain Channel runs along the right-hand side of the soft top, directing rainwater run-off from the canopy away from the body sides.
Flywheel for the 2.4L TDCi (Puma) engine Clutch Assembly. The flywheel bolts to the rear face of the crankshaft and serves as the primary friction...
View full detailsExhaust Front Pipe with Catalyst is the first section of the exhaust system, connecting the turbocharger outlet to the rest of the exhaust line. T...
View full detailsCluster Gear (layshaft gear cluster) for the LT77 5-speed manual gearbox, to military specification. The cluster gear runs on the layshaft and car...
View full details2nd Gear is a constant-mesh gear wheel within the LT77 five-speed manual gearbox. It provides the second forward gear ratio, meshing with its matc...
View full detailsDrive Screw for use in Land Rover body, chassis, and hardware assembly. A No.14 × 1" drive screw, supplied individually.
Sealing Washer for the coolant temperature transmitter adaptor, for use on the 2.25L Diesel, 2.5L Diesel, and 2.5L Turbo Diesel engines. Fitted at...
View full detailsBulb is a 12V 21W single-filament bulb with a red finish, fitted in rear lamp assemblies. The single filament provides a single-intensity function...
View full detailsTransfer Box High Gear is the high-range gear for the LT230 transfer box. It forms part of the transfer gear train, providing the high-ratio outpu...
View full detailsIntermediate Shaft Circlip Retaining circlip for the intermediate shaft in the LT230 transfer box. Locates on the intermediate shaft to retain the...
View full detailsHex Bolt - M10 x 40mm is a metric hexagon head bolt used in the hardware and fixings range for Land Rover vehicles. Thread specification M10, leng...
View full detailsDoor Latch Link is the connecting rod within the rear side door latch mechanism, transferring movement from the exterior push-button handle to the ...
View full detailsDoor Check Buffer Stop is the long buffer fitted to the lever-type stay of the rear end door check mechanism. It cushions the stay at the end of th...
View full detailsValve Guide for the cylinder head of the 2.5L 200 TDi and 300 TDi diesel engines. The valve guide is pressed into the cylinder head and locates th...
View full detailsInlet Manifold Seal seals the joint between the inlet manifold and the throttle body within the air intake system. Fitted to the 2.2L TDCi (Td4) d...
View full detailsFuel System Ring - O-ring seal for the fuel injection pump on the 2.2L Puma diesel engine. The O-ring seals a joint on the fuel injection pump bod...
View full detailsRear Step in NAS style for Defender 110, from chassis suffix XA onwards. The step bolts to the rear cross member and spans the full width of the t...
View full detailsMainshaft O-Ring for the LT85 five-speed gearbox. Seals around the mainshaft within the gearbox, retaining lubricating oil and preventing ingress ...
View full detailsBolt. Hexagon-head threaded fastener for general assembly and retaining applications. Supplied individually.
Front Door is a complete steel front door assembly for the right-hand (RH) side. Built around a pressed-steel frame and outer skin, it is configur...
View full detailsFront Door is a complete steel front door assembly for the left-hand (LH) side. Built around a pressed-steel frame and outer skin, it is configure...
View full detailsCamera Monitor - Rear View Mirror is a 4.3-inch TFT-LCD monitor that clips over the interior rear-view mirror to display the reversing camera image...
View full detailsWiring Loom - Reversing Camera is a piggy-back harness that supplies power to the number plate light and its integrated reversing camera. It conne...
View full detailsNumber Plate Light with Reversing Camera - a combined rear number plate lamp and reversing camera that mounts in the existing number plate light po...
View full detailsAlternator Bearing Kit - a service kit containing the bearing components required to recondition an alternator unit. Intended for use during alter...
View full detailsWater Pump circulates coolant through the engine cooling circuit, drawing coolant from the radiator and driving it through the block and cylinder h...
View full detailsReverse Idler Gear Assembly for the LT77 five-speed manual gearbox. Provides the reverse gear train, reversing mainshaft rotation for reverse driv...
View full detailsP-Clip for routing and securing engine-bay pipework. Clamps the fuel pipes of the 4-cylinder carburettor petrol engine and the evaporative loss (E...
View full detailsParts for the classic Land Rover Defender 90, 110 and 130, covering L315 and L316 models built from 1983 to 2016. This collection does not include the Defender L663. Over 5,900 parts available across Genuine, OEM, and aftermarket quality tiers, for 200Tdi, 300Tdi, TD5, and Puma engine families.
This collection covers the classic Land Rover Defender produced from 1983 to 2016, in three body lengths: the 90 (short wheelbase), the 110 (long wheelbase), and the 130 (crew cab and high-capacity load variants). These span two platform designations. L315 refers to the earlier platform in use from 1983. L316 refers to the revised platform introduced in the early 1990s and used through to final production in January 2016.
This collection does not cover the current-generation Defender L663, introduced in 2020. Parts for the L663 are held separately under Land Rover Defender parts.
Engine FamiliesFour diesel engine families account for the majority of classic Defender rebuilds and restorations supported by this collection.
The 200Tdi was introduced in 1990 and produced through to 1994. It is a direct-injection turbodiesel known for mechanical simplicity. Common service and rebuild requirements include the head gasket, water pump, injector seals, and thermostat.
The 300Tdi ran from 1994 to 1998. It uses a belt-driven timing system and a revised cylinder head. Timing belt and water pump replacement is the highest-priority service interval on this engine. Complete timing kit assemblies for the 300Tdi are stocked.
The TD5 ran from 1998 to 2007 and was Land Rover's first electronically managed Defender engine. It introduced an integrated injector harness routed through the rocker cover, a revised fuel delivery system, and full ECU control. Commonly replaced components include the rocker cover gasket, injector harness, and exhaust manifold.
The Puma TDCi variants ran from 2007 to 2016. A 2.4 litre unit was used from 2007 to 2011, replaced by a 2.2 litre unit from 2011 onwards. Common service requirements include EGR components, cooling system parts, and turbo-related items.
Defenders built before 1990 and fitted with earlier units including the 2.25 petrol, 2.5 normally-aspirated diesel, or V8 petrol are also supported where parts cross-reference with the L315 platform. Use the engine filter or search by OEM part number for these variants.
Engine family production date ranges per Land Rover workshop manual specifications and the Land Rover parts catalogue for L315 and L316 platforms.
Some components differ between the 90, 110, and 130. Propshafts, chassis outriggers, fuel tanks, body tub sections, and wheelbase-specific brackets are body-length dependent. Where a part is specific to one or two body lengths, the product listing states this.
Components that fit across all three body lengths include most engine parts, brake components, axle rebuild kits, and electrical items. No body-length filter is needed for those categories.
Quality TiersParts in this collection are available in three quality tiers, each suited to different rebuild priorities and budgets.
Genuine Land Rover parts are original components produced by or for Land Rover to factory specification. These are the correct choice where an exact factory-spec replacement is required.
OEM-equivalent parts are produced by the original component manufacturer, often the same supplier that produced the part for Land Rover during original production. These offer factory-level quality at a lower price point than branded genuine parts and are widely used in professional workshop settings.
Aftermarket parts are third-party manufactured alternatives. Quality varies by supplier and application. For high-wear consumable items these are frequently a practical and cost-effective choice.
Use the quality filter on the left to narrow results by tier.
VIN LookupThe 17-character VIN on your Defender's identification plate encodes the body variant, engine family, and model year. For any part where fitment is uncertain, the VIN is the most reliable starting point for confirmation.
Budget Parts supports VIN-based fitment enquiries via the contact page. If you are unsure whether a part is correct for your specific Defender, use the part number search or submit an enquiry before ordering.
Related CategoriesSearching for a specific part type rather than browsing the full catalogue? The following collections group classic Defender components by category:
Propshafts, universal joints, and drivetrain rebuild components.
Land Rover driveshaft parts →The most reliable method is the VIN plate, usually found on the driver's side A-post or on a plate inside the door aperture. The engine code within the VIN confirms the engine family. As a general guide based on production dates: the 200Tdi was fitted from 1990 to 1994, the 300Tdi from 1994 to 1998, the TD5 from 1998 to 2007, and the Puma TDCi from 2007 to 2016. Defenders built before 1990 used earlier petrol and diesel units. The engine stamp on the block itself also confirms the variant if the VIN plate is absent or damaged.
No. Classic Defenders use era-specific loom designs that are not interchangeable between engine generations. The TD5 uses a loom that integrates with the ECU and routes the injector harness through the rocker cover, which is incompatible with earlier Tdi wiring architecture. Puma TDCi looms differ again due to the revised engine management system. Always match the loom to both the engine family and body length (90, 110, or 130) when ordering.
Wheelbase-specific components include propshafts, fuel tanks, chassis outriggers, body tub sections, and some bracket assemblies. Most mechanical components are shared across all three body lengths, including engine internals, brake components, axle rebuild parts, and the majority of electrical items. Product listings on this page state body-length fitment where it is relevant.
Some parts do cross-reference between the classic Defender and the Discovery 1, particularly for the 200Tdi engine, which shares components with the Discovery 1 200Tdi unit. Axle components also overlap to a degree between the two platforms. Cross-referencing by part number is essential before ordering, as not all apparently similar parts are dimensionally or functionally interchangeable. Use the part number search or contact Budget Parts with your VIN if you are unsure.
Genuine parts are Land Rover-branded components produced to original factory specification. OEM-equivalent parts are made by the original component supplier, often the same manufacturer that supplied Land Rover during production, and offer comparable quality without the Land Rover brand premium. Aftermarket parts are third-party alternatives that vary in quality by supplier. All three tiers are available in this collection and can be filtered using the quality selector.
The final classic Defender left the Solihull production line in January 2016, marking the end of a model that had been in continuous production since 1983. The current-generation Defender L663 is a separate vehicle on a different platform and is not covered by this collection.
The following guides cover engine-specific maintenance and component topics relevant to the Defender models in this collection. Each article provides detailed technical context and links back to the relevant parts.
A technical reference covering the 300Tdi engine's known weak points, service priorities, and the components most commonly required for a full rebuild or preventive overhaul.
Defender 300Tdi guide →Covers the TD5 exhaust manifold cracking failure in detail, including inspection method, replacement options, and why stud quality matters for a lasting repair.
Td5 exhaust manifold guide →A maintenance and fault reference for the Puma 2.4 TDCi engine fitted to post-2007 Defenders, covering EGR, cooling, and turbo-related service requirements.
Defender 2.4 TDCi guide →