Genuine Land Rover Parts

sealing washer AEU2152L

spacer 90576632

diff pinion 533777

cable accelerator ANR4617

Battery Mounting Panel The pressed panel that forms the base on which the vehicle battery is seated and secured. It locates and supports the batte...

Heater Assembly Clip A retaining clip used within the heater (HVAC) assembly to hold adjoining components of the heater box together. It secures t...

Stud A threaded stud fastener that screws into a tapped hole at one end to provide a fixed threaded projection. The exposed end accepts a nut, cla...

Exh 60 mm Exh

Plain Washer A flat washer that seats beneath a bolt head or nut to distribute the fastener's clamping load across a wider area of the mating surfa...

Rear Body Capping Corner, a body trim finisher fitted to the top edge of the rear body. This corner section caps the exposed top edge of the body ...

Military Tow Hitch Drop Plate, part of the rear towing assembly. The drop plate bolts to the rear cross-member and provides a lowered mounting fac...

Plain Washer, an M6 flat washer. It fits under the head of an M6 bolt or nut to spread the clamping load over a wider bearing area and protect the...

Rear Body Capping Corner, a body trim finisher fitted to the top edge of the rear body. This corner section caps the exposed top edge of the body ...

Fuel cap for the fuel filler assembly. Seals the fuel filler neck to prevent fuel evaporation, contamination, and spillage.

Bolt - a hexagonal-head threaded fastener used in vehicle assembly.

Piston for the 3.5L V8 petrol engine, part of the piston and cylinder bore assembly. This is a standard-size piston for the low-compression 8.25:1...

nut 514929

Washer - a general-purpose fastener washer used across a number of assemblies, including facia, fuel injection, sunroof and interior lamp fixings. ...

Rocker Shaft Spring for the 2.5L 200 TDi diesel engine, fitted on the rocker shaft within the valve train. The spring spaces the rocker arms along...

Braided Brake Hose Kit for the front and rear brake hydraulic circuit, replacing the flexible rubber hoses with stainless-steel braided lines. This...

Circlip (retaining ring) used to locate and retain a component on a shaft or within a bore. It seats into a machined groove to prevent axial movem...

Blanking Plug used to close off an unused aperture in the body or panel work, part of the grommets and blanking group. It seals a redundant or opt...

shackle pin 595237

Zinc-based corrosion protection spray in a 400ml aerosol can. Applies a zinc-rich coating to bare metal, weld seams, and repaired bodywork to inhi...

Layshaft Shim for the LT77 and R380 five-speed manual gearboxes, located at the layshaft (countershaft) and reverse idler. This is a selective shi...

Lock Nut - a self-locking hex nut used to secure a door hinge. The locking feature resists loosening under the vibration and repeated loading of h...

Facia Louvre Vent Housing - a dashboard air outlet housing within the heating and ventilation (HVAC) system. The housing carries the adjustable lo...

Snap Ring - a retaining ring for the rear suspension top link ball joint. The snap ring seats in a groove to secure the ball joint within the top ...

Throttle Shaft Bearing - a bearing bush that supports the throttle shaft within the carburettor fuel system. The bearing locates the throttle spin...