Land Rover Accessories

Rear Shock Absorber provides damping control on the rear axle for suspension set up with approximately 50 mm of additional travel. Twin-tube const...

Front Towing Eye / Lifting Ring bolts to the front of the chassis, providing an anchored attachment point for towing, recovery and lifting. The ri...

Front Mudflap for the right-hand front wheel arch. Mounted behind the front wheel, it deflects road spray, mud, stones and debris thrown up by the...

Front Shock Absorber Turrets - Pair are the tubular mounting towers that locate the upper end of the front dampers in the front suspension. They b...

Centre floor mounted storage cubby box providing an enclosed compartment between the front seats and additional cup holder provision within the int...

Split Pin - a 1.5mm x 12mm cotter pin used to lock a slotted (castle) nut or to retain a clevis pin. Passed through a drilled cross-hole in the sh...

Static Lap Seat Belt for the second-row seating position, forming part of the interior occupant restraint system. The non-retractable, fixed-lengt...

Light Guard Set - Rear Hinged rear lamp guard set that protects the rear lamp lenses from stone strike and low-speed impact during off-road use. T...

This new Terrafirma winch has a powerful 6hp, 12v motor combined with a 3-stage planetary gearbox that gives over 5 tonnes of pulling power. It has...

Lamp Guard for 95mm NAS round lights fitted to Defender models up to 2016. Designed to protect the larger-diameter 95mm North American Specificati...

Mudflap Bracket – LH is the left-hand mounting bracket for the mudflap. It secures the mudflap to the body behind the wheel, holding it in positio...

Front Mudflap for the left-hand front wheel arch. Mounted behind the front wheel, it deflects road spray, mud, stones and debris thrown up by the ...

Rear Mudflap for the left-hand side, part of the exterior underbody protection assembly. Fitted behind the rear wheel, it shields the lower rear b...

Mudflap – Rear – RH is the right-hand rear mudflap, fitted behind the rear wheel to reduce road spray and protect the bodywork from mud and stone t...

Tow Ball 50mm flange-fixing tow ball for use with a bolt-on tow bar drop plate. Rated for a maximum gross trailer weight of 3.5 tonnes, with a D-v...

Snatch Block - a winch recovery pulley used to redirect a winch line or to double its effective pulling capacity. Rated for a 10-tonne working load...

The Defender Snow Cowl for Left Wing is designed to prevent moisture, debris, and snow from entering your vehicle's intake system. It fits securely...

Steering Guard - 8mm Alloy - LHD - Black for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate wit...

JATE Ring - Forged is a forged lashing and lifting ring used on military specification vehicles. It bolts to the chassis in place of the standard ...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Transfer Box Output Mud Shield Shield that fits over the transfer box output flange to protect the output shaft oil seal from mud, water and debris...

Double DIN Console - one-piece centre console fascia in black, providing the mounting aperture for a double DIN head unit in the Td5 dashboard. It...

Bolt M8 X 16 HTSETS 8.8 S/COL sold EACH

Bolt is an M8 x 80 mm threaded fastener used to clamp two components together at a bolted joint. It is tightened into a threaded hole or secured w...

Spare Wheel Cover for an externally mounted spare wheel sized 7.50x16 (235/85R16). Constructed from soft vinyl, it shields the spare wheel and tyr...

Cleat Rope Hook Body Side All and Classic (Softtop) - Series Defender

Bonnet Protector - curved aluminium cover plate fitted over the leading edge of the bonnet to shield the panel from stone chips and road debris. Sa...

Sill Protector in aluminium chequer plate, guarding the sill panel below the doors. Fits along the sill to shield the panel from stone chips, scuf...

Headlamp Guard in galvanised steel. A protective grille fitted over the headlamp lens to shield it from stone chips, debris and impact damage. The...

Rear Wheelarch Moulding is an eyebrow-style trim moulding that fits over the rear wheelarch flange on the outer bodyside, supplied in a gloss finis...

Swing-Away Spare Wheel Carrier mounts the spare wheel on a pivoting arm at the rear of the vehicle, for the half-door tailgate configuration. Carr...

LED Light Upgrade Kit (deluxe smoked-lens type, 73mm) - a complete set of WIPAC LED lamps with smoked lenses, replacing the original incandescent f...

Front Coil Spring - Medium Duty, +2" Lift (Terrafirma). These front coil springs raise ride height by approximately 2 inches over standard and are...

Side Step Set is a pair of side steps (running boards) that mount along the lower body sills to aid entry to and exit from the vehicle. Each step ...

Alloy Gear & Transfer Box Knobs Machined alloy replacement knobs for the main gear lever and the transfer box lever, supplied as a matching pai...

Tow Electrics Wiring Harness - N Type Socket - plug-in wiring harness providing an N-type 7-pin socket at the towbar, enabling connection of traile...

Filler Plug in blue anodised aluminium, replacing the standard cooling system filler and blanking plug at the thermostat housing. Seals against a ...

Mudflap Bracket – RH is the right-hand mounting bracket for the mudflap. It secures the mudflap to the body behind the wheel, holding it in positi...

USB Charging Socket - a dashboard-mounted charging socket that fits a standard factory switch aperture, giving a flush, integrated appearance in pl...

Towing Socket Plate for the trailer towing electrics. This mounting plate carries the trailer electrical socket at the rear of the vehicle, provid...

Rear Coil Spring for the rear suspension, fitting between the axle and the chassis spring seat to support the vehicle and absorb road inputs. This...

Folding Side Step that mounts to the sill area to provide a step for entering and leaving the vehicle. The step folds up against the bodywork when ...

Rear Mudflap for the left-hand side, part of the exterior underbody protection assembly. Fitted behind the rear wheel, it shields the lower rear b...

Modular Steel Wheel - Black - 7J x 16 A modular steel road wheel finished in black, sized 7J x 16 with an ET08 offset. The steel construction suit...

Steel Road Wheel is a welded steel road wheel with a 6.5 x 16 inch rim, finished in black with a Wolf-style profile for road use with tubeless tyre...

Alloy Wheel is a single-piece 16 x 7-inch alloy road wheel finished in black. It has a five-stud 5x165 mm bolt pattern and an ET20 offset, which s...

Snow Cowl - a moulded ABS cover that fits over the wing-top fresh-air (heater) intake vent. Based on the original military-pattern design, it shie...

Waterproof Seat Cover Set - front seat covers finished in black, forming part of the vehicle's interior protection. The covers are made from water...