for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Soft Top Finisher for the right-hand rear quarter panel, part of the soft top body trim. Fits the rear quarter section on the RH side to finish th...
View full detailsTowing Bracket - front tow-hook eye bracket that forms a chassis-mounted attachment point at the front of the vehicle. It bolts to the front of th...
View full detailsTowing Kit with Electrics - a tow bar kit supplied with trailer electrical wiring. The kit provides the tow bar assembly together with the towing ...
View full detailsWinch Plate — the structural mounting plate that secures a recovery winch to the vehicle. It provides the bolting platform for the winch and carri...
View full detailsSide Step Tread Rubber
Internal Window Guards are a fitted pair of protective grilles that mount on the inside face of the rear side sliding windows. Manufactured from 2...
View full detailsWindow Guards ?" rear door & quarter lights (Internal)
Window Guard - Rear Door - a protective guard that fits over the rear door (tailgate) window to shield the glass and improve rear security. It is ...
View full detailsFly Screen - a mesh screen fitted across an opening to keep insects and debris out while allowing airflow.
Towing and Lifting
Towing Plate for the tow bar assembly, the plate that mounts the tow bar to the rear of the vehicle chassis. The plate provides the fixing interfa...
View full detailsrock slider, rock guards (pair) BA 2091 Generic picture, the set supplied is BLACK coated, NOT galvanised.
Snow chain pair sized for tyres with a 205mm section width on 16-inch rims. Supplied as a pair for a single axle. Provides additional traction on ...
View full detailsSteering Damper - a hydraulic damper fitted within the steering linkage to absorb steering oscillation and feedback. Mounted between the chassis a...
View full detailsRock Sliders with Tree Bars - chassis-mounted side protection bars from the Terrafirma range that run along the lower body beneath the doors. The ...
View full detailsRear Top Shock Mount Relocator - repositions the upper rear shock absorber mounting 50 mm (2 in) lower on the chassis. Dropping the top mount incr...
View full detailsTubular Front Bumper - a non-winch front bumper for Defenders with air conditioning, replacing the standard front bumper. Constructed from black p...
View full detailsTubular Front Bumper - a non-winch front bumper for Defenders without air conditioning, replacing the standard front bumper. Constructed from blac...
View full detailsSeat Belt Anchorage Frame is a front seat belt mounting bar for Soft Top vehicles, providing secure anchorage points where the open body offers no ...
View full detailsSill Protector Pair - exterior body protection panels that fit along the lower sill (rocker) sections beneath the doors. Supplied as a matched lef...
View full detailsSteering Rods - 4 Track Rod Ends - Discovery 1/RRC
Snorkel - a raised air intake that relocates the engine's air inlet from the standard wing position up to roof height, drawing air from a higher, c...
View full detailsWing Mirror Covers are a pair of chromed upper caps for the exterior door mirror assembly. Each cover fits over the upper section of the existing ...
View full detailsWind Deflectors fit inside the top of the door frame alongside the window glass to reduce draughts and rain ingress when driving with the windows o...
View full detailsRear Lamp Guard Set - exterior protection fitted over the rear lamp units to shield the lenses from impact damage caused by branches, loose stones ...
View full detailsFront Lamp Guards are protective covers that fit over the front headlamp units to shield the lenses from stone chips, flying debris and impact dama...
View full detailsRear Lower Light Guards are protective covers that fit over the lower rear lamp units to shield the lenses from stone chips, flying debris and impa...
View full detailsUpgrade your Range Rover L322 (2002-2012) with these high-quality Stainless Steel Side Tubes, designed to make entering and exiting your vehicle ea...
View full detailsSide Steps are a pair of running boards that mount along the lower body sill to provide a stable step for entry and exit and to protect the rocker ...
View full detailsSide Protection Tubes - a pair of tubular side rails in stainless steel that mount along the lower body beneath the doors. They provide a step to ...
View full detailsEnhance the functionality and look of your Range Rover Evoque with these Stainless Steel Side Protection Tubes. Technical Specifications: Mater...
View full detailsTerrafirma Iron Goat switch kit Customize your Defender Dash with controls for heated seats, heated windscreen, additional lights, etc... 6 switche...
View full detailsTerrafirma Iron Goat switch kit Customize your Defender Dash with controls for heated seats, heated windscreen, additional lights, etc... 6 switch...
View full detailsFuel Tank Guard - a steel underbody guard that protects the fuel tank from rocks and impact during off-road use. It incorporates a detachable brac...
View full detailsRear Bumper - a heavy-duty rear bumper with integrated jacking points, fitted in place of the original rear bumper. The built-in jacking points gi...
View full detailsSide Locker - a stainless steel storage box that mounts on the body side, between the cab door and the rear wheel arch, and can be fitted on either...
View full details2inch receiver drop plate up to 1998
Receiver Hitch Recovery Point - a machined steel recovery point that inserts into a 2-inch square receiver hitch and is machined to accept a standa...
View full detailsRear Receiver Hitch - a 2-inch square receiver mount that bolts to the rear of the chassis to accept interchangeable hitch-mounted equipment. It p...
View full detailsGearbox Guard - an underbody skid plate that shields the gearbox from impact damage during off-road use. It bolts beneath the vehicle to protect t...
View full detailsFuel tank guard Aluminium 90 83-98
Rear differential guard Discovery 2
Front Differential Guard - a bolt-on skid plate that shields the front axle differential housing from impact damage during off-road use. Manufactu...
View full detailsTransmission Guard - an under-body skid plate that shields the lower transmission, where the gearbox, transfer box and handbrake assembly sit sligh...
View full detailsAlloy Steering and Sump Guard for - Discovery 4
Terrafirma alloy steering guard Discovery 3
Grip Tape - a self-adhesive anti-slip tape used to add grip to step, sill, bumper and load-area surfaces. The abrasive top coat gives secure footi...
View full detailsTerrafirma rock sliders with tree bars Discovery 3
Collection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026