for Discounts / VAT
for Discounts & Correct VAT
Exterior protection, lighting upgrades, and vehicle-fitted accessories for Land Rover and Range Rover models from Series to the current Defender L663 and Range Rover L460. All items held in EU stock at our warehouse in The Hague.
Roof Access Ladder Rear Assembly is a rear-mounted access ladder with an integrated rear lamp guard. It mounts to the rear bodywork to provide saf...
View full detailsFolding Side Step Mat - tread mat fitted to the folding side access step. Provides a non-slip stepping surface for entry and exit at the side doors.
Side Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...
View full detailsBonnet Protector - a 3 mm aluminium plate that mounts over the bonnet to shield the panel from stone chips and debris. It is pressed to the bonnet...
View full detailsTow Bar Wiring Kit - a dedicated 13-pin towing electrics loom that links the vehicle's lighting and auxiliary circuits to a trailer or caravan conn...
View full detailsDog Guard Kit installs behind the rear seats to separate the load area from the passenger cabin, keeping pets and shifting luggage out of the occup...
View full detailsFixed Towing Drop Plate bolts to the rear tow bar to carry the towball at the correct towing height. This is the extra-long version, giving a grea...
View full detailsReturn to Centre Steering Damper for installation within the steering linkage assembly. This unit mounts between the axle steering arms and the st...
View full detailsFits Defender 300Tdi, Td5, and 2007-2016 models with a raised air intake Inside diameter: 64mm Ideal for wading and dusty environments, keepin...
View full detailsSpare Wheel Carrier is a fixed rear-door-mounted bracket that supports and retains the spare wheel. It bolts directly to the rear door and locates...
View full detailsUpgrade your Land Rover Defender with this heavy-duty steel winch bumper, designed specifically for non-air-conditioned models. Built for durabilit...
View full detailsDislocation Cone - Rear Coil Spring for the rear coil spring seat assembly. When long-travel shock absorbers or lowered top-mount shock relocators...
View full detailsSport Front Grille & Headlamp Surround Kit - a front-end exterior styling set that replaces the factory front grille and headlamp surrounds. I...
View full detailsCoil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...
View full detailsUpgrade or replace your steering wheel boss with this high-quality 36-tooth adapter, designed specifically for Land Rover Defender to 1991 90/110 v...
View full detailsRubber Floor Mat Set - Front for the front footwells, supplied as a matching pair. The mats are moulded in rubber to protect the front floor area a...
View full detailsDrop Plate Strengthener for the towing equipment assembly. It acts as a spacer and strengthener for the towing jaw and the towing jaw/ball fixings...
View full detailsParts Catalogue for the Land Rover Defender, covering 1987 to 2006. This official illustrated reference provides exploded diagrams and part number...
View full detailsLand Rover Series III Parts Catalogue, an illustrated reprint published by Brooklands Books Ltd. It reproduces the factory parts catalogue for the ...
View full detailsDiscovery 3 Haynes Manual
Wheel Arch Kit: a complete set of standard width wheel arches with a matt black finish. The semi-flexible, vacuum-formed plastic arches replace th...
View full detailsHigh-Tensile Bolt - 1/2" UNF x 3" for use in Land Rover chassis, body, and mechanical assemblies where a 1/2" UNF thread and 3" length is specified...
View full detailsParts Catalogue is the parts reference for the Land Rover Series IIA, covering the bonneted control models. It sets out the part numbers for the v...
View full detailsProtect the load area of your Range Rover Sport (2005-2013) with this high-quality rubber replacement mat. Designed to fit perfectly into your vehi...
View full detailsWinch Remote Control operates an electric recovery winch wirelessly, allowing the operator to stand clear of the winch line during recovery. Wirel...
View full detailsLuggage Tie-Down Hook - anchor hook in the luggage compartment for securing loads, integrated with the side trim retainer. Located in the luggage ...
View full detailsKey Fob Cover Kit is a replacement outer cover for the remote smart key. The kit contains the upper and lower cover halves with the function butto...
View full detailsDecal - TDi - a self-adhesive "TDi" engine decal for the front wing, in light grey and measuring 9cm. The decal reproduces the original "TDi" wing...
View full detailsWinch Remote Control - Plug-In
Emblem - LAND - Silver - 28cm is the "LAND" lettering badge that forms part of the bonnet exterior script. The silver badge measures 28 cm in leng...
View full detailsDecal is an exterior body decal applied to the rear of the vehicle. It carries the Land Rover name in silver lettering on a black background, and ...
View full detailsROVER Lettering Emblem - silver, 35 cm - for Defender (2007-2016). This is the adhesive silver lettering strip that spells out "ROVER" on the exte...
View full detailsMud Flap Bracket for the right-hand rear position on High Capacity Pick Up (HCPU) bodywork. Part of the exterior mud flap mounting. The HCPU rear ...
View full detailsMudflap Bracket retains the front right-hand mudflap, securing it to the body so the flap hangs correctly behind the front wheel. Manufactured in ...
View full detailsBonnet Decal - Silver - self-adhesive exterior decal applied to the bonnet, finished in silver.
Cubby Box - Black Mesh
LED Daytime Running Lights - a pair of Ring LED running lamps for the DA8600 front bumper. Each lamp uses 5 x 1.5W LEDs and measures 57 mm (H) x 1...
View full detailsFinisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...
View full detailsHub Cap for the 101 Forward Control wheel hub. Fits the wheel hub on Series II, IIA, and III 101 Forward Control variants, covering and protecting...
View full detailsClip for exterior body trim and accessory fittings. The clip retains body mouldings, side steps, mudflaps and related exterior trim to the body, p...
View full detailsSteel Jerry Can with a 20-litre capacity. A pressed and welded steel liquid carrier built to the traditional jerry can pattern, used to carry a res...
View full detailsDinitrol Aerosol Extension Nozzle - 600mm, white. A flexible extension tube for applying Dinitrol cavity wax aerosols into enclosed spaces that can...
View full detailsRear Crossmember Recovery Point - a bolt-on recovery attachment that mounts centrally to the rear chassis crossmember, providing a heavy-duty lashi...
View full detailsSill Tread Plates - Chequered - Pair - Black
Free-Wheeling Hub Repair Kit for 24-spline manual free-wheeling hubs. Manual free-wheeling hubs allow the front drive members to be disengaged fro...
View full detailsShock Absorber - Front - +2" Travel for the front coil spring suspension system, designed for use with a 2-inch suspension lift. The extended-trav...
View full detailsWood-Rim Steering Wheel, 15" diameter with a semi-dished profile. The wheel mounts to the column through a separate steering boss, which is requir...
View full detailsSpring Retaining Plate for the front coil spring suspension. The plate seats the upper end of the front coil spring against the chassis spring seat...
View full detailsCollection Scope
This collection covers vehicle-fitted accessories and exterior upgrades for the full Land Rover and Range Rover range. Products include aluminium sill protectors for Defender 90 and 110, folding side steps, front and rear mudflap assemblies, LED lighting upgrade kits, round light guards for 73mm lamp apertures, interior mirror brackets, rope hooks for softtop Defender and Series bodywork, and jack racks.
The collection spans production from the original Land Rover Series I of 1948 onwards through to current models. Use the model filter on the left to narrow results to your vehicle variant. For Defender models specifically, body style matters for sill protector and side step fitment: the 90 (three-door) and 110 (five-door station wagon) use different lengths.
Fitting hardware, installation screws, bolts, and fasteners required for accessory installation are held separately in the fixings and hardware collection.
Fitment GuideAccessories in this collection are not universally cross-model. Fitment varies significantly by generation and body configuration. The guide below covers the main groupings.
Classic and Series vehicles (Series I 1948 to 1958, Series II and III 1958 to 1985, Defender Classic 1983 to 2016): This is the largest single group in the collection. Round 73mm light guards, LED lamp upgrade kits, aluminium sill protectors in 90 and 110 lengths, rope hooks for softtop bodywork, and folding side steps are all concentrated in this segment. For Classic Defender buyers, Defender Classic parts is the dedicated model collection.
Defender L663 (2020 onwards): The current generation Defender uses a fundamentally different body architecture built on the MLA platform. Accessories for this generation are structurally distinct from Classic Defender items. Filter to Defender New above the grid to see L663-compatible listings.
Discovery (Discovery 1 1989 to 1998, Discovery 2 1998 to 2004, Discovery 3 2004 to 2009, Discovery 4 2009 to 2017, Discovery 5 2017 onwards): Mudflap assemblies and exterior trim accessories are present in the collection across these generations. Filter to your specific Discovery generation to avoid selecting items intended for a different platform.
Range Rover (L322 2002 to 2012, L405 2013 to 2022, L460 2022 onwards), Range Rover Sport (L320 2005 to 2013, L494 2014 to 2022, L461 2023 onwards), Range Rover Evoque (L538 2011 to 2018, L551 2019 onwards), Range Rover Velar L560 (2017 onwards): Exterior accessories for these models are listed in the filterable grid. Mudflap assemblies with brackets are confirmed in the collection for certain Range Rover variants. Use the model filter to confirm availability for your specific generation.
Freelander (Freelander 1 1997 to 2006, Freelander 2 2006 to 2014) and Discovery Sport (2015 onwards): Accessories for these compact models are held within the collection and are filterable by model.
The Land Rover Defender's production history from 1983 to 2016 and from 2020 onwards is documented at the Land Rover Defender entity page on Wikipedia.
Accessories in this collection are available in three quality categories, visible on each product card.
Genuine items are supplied in Land Rover branded packaging and produced to the exact specification set by Jaguar Land Rover. These are the correct choice where original material quality or a warranty-compliant installation is required.
OEM (Original Equipment Manufacturer) items are produced by the same manufacturers that supply Land Rover on the production line, but sold without the Land Rover brand label. In many cases the part is identical in specification and manufacturing tolerance to the Genuine item at a lower price point.
Aftermarket items are produced independently to fit Land Rover applications. Quality varies by manufacturer and category. Aftermarket is common for aluminium protection items (sill protectors, light guards) where independent fabricators often meet or exceed OEM dimensional tolerances for classic body types.
The quality filter above the grid allows you to restrict results to a single tier.
Technical GuidesBackground reading from the Budget Parts workshop blog for buyers planning accessory installations or EU sourcing decisions.
Specific exterior protection and upgrade parts chosen for a Classic Defender 90 prepared for demanding overland use, with reasoning behind each selection.
Defender 90 Maroc prepPractical overview of Defender parts availability across the EU market, covering Classic Defender and L663, including where fitment differences affect ordering decisions.
Defender parts Europe 2025For parts beyond accessories and exterior upgrades, the following collections may be relevant.
Full parts range for Defender 90, 110, and 130 produced 1983 to 2016.
Defender Classic partsFull parts range for the current Defender from 2020 onwards.
Defender L663 partsStructural body panels, chassis sections, and body hardware. Sits alongside accessories rather than overlapping with them.
Land Rover body and chassis partsSteel and alloy wheel options across the Land Rover and Range Rover model range.
Land Rover wheelsNuts, bolts, screws, washers, and installation fasteners. Required for many accessory installations where hardware is not bundled.
Land Rover fixings and hardwareNo. The Defender 90 (three-door) and Defender 110 (five-door station wagon) have different sill lengths. Sill protectors in this collection are listed with the body variant in the product title. Check the part number and description carefully before ordering. If you are unsure of your body configuration, your vehicle's VIN can be decoded using the official Land Rover VIN check tool to confirm wheelbase and body type.
Not all of them. The L663 Defender uses a different body architecture from the Classic Defender produced between 1983 and 2016. Items such as 73mm round light guards and Classic Defender sill protectors are not compatible with the L663. Use the model filter and select Defender New to see accessories listed specifically for the current generation.
OEM stands for Original Equipment Manufacturer. An OEM part is produced by the same manufacturer that supplies Land Rover during vehicle production, but is sold without the Land Rover brand label. For accessories such as aluminium sill protectors, the OEM and Genuine versions are frequently produced to identical dimensions. Aftermarket items are made independently and are common for protection and styling parts where standardised fitment dimensions allow close tolerances.
Budget Parts is based in The Hague, Netherlands. Orders are fulfilled from EU stock, which means no import duties apply for buyers within the European Union. VAT is handled at point of sale. Buyers outside the EU should check applicable import rules for their country.
Yes. The collection includes items designed for Series I, II, and III vehicles, including round light guards for 73mm lamp apertures, rope hooks for softtop bodywork compatible with Series and Classic Defender bodies, and wheel nuts for steel wheel applications. Land Rover and its Series predecessors represent over two million vehicles built since 1948, and a significant portion of those remain in active use across Europe. Use the Series filter options (Series 1 or Series 2 and 3) above the grid to narrow results.
Some accessories are sold with fitting hardware. Check the individual product description for confirmation. Where fasteners are sold separately, they are listed in the fixings and hardware collection at roverparts.eu/collections/land-rover-hardware-fasteners.
Yes. Budget Parts operates a wholesale partner platform for independent workshops and trade buyers. The login is accessible via the Wholesale Portal link in the site header. Creating a trade account gives access to volume pricing and VAT-exclusive invoicing.
Updated: 12 May 2026