Land Rover Axle & Swivel Parts

Drive Flange Joint Washer is the sealing washer installed at the joint between the drive flange and the stub axle, preventing differential oil from...

Swivel Housing Grease for the front axle swivel assembly, supplied as a single pre-measured one-shot sachet. The sachet delivers the correct charg...

Swivel Housing to Stub Axle Joint Washer for the front axle swivel assembly. This sealing washer fits between the swivel housing and the stub axle...

Axle Breather for the front axle housing on vehicles without a remote breather pipe assembly. This screw-in vent allows the air inside the front a...

Swivel Pin Housing Gasket for the front axle swivel assembly. This gasket seals the mating face between the chrome swivel ball housing and the fro...

Rear Axle Half Shaft for the right-hand side, part of the rear axle Hubs & Driveshafts assembly. Transmits drive torque from the rear differen...

Swivel Pin Gasket seals the joint between the swivel pin housing and the axle case on the front axle. It sits at the mating face where the swivel ...

Rear Axle Half Shaft for the left-hand side, part of the rear axle Hubs & Driveshafts assembly. Transmits drive torque from the rear different...

Swivel Pin Lock Tab for the front swivel pin housing on Land Rover Series II, IIA, and III. Fitted to the 7/16 BSF studs that retain the swivel pi...

Front Stub Axle for the front hub and swivel pin housing assembly at the front axle. The stub axle passes through the swivel pin housing and provi...

Lock Plate for the front axle assembly. This metal tab washer locks fastener heads in position by bending a tab against the bolt head or nut after...

Lower Swivel Pin for the front axle swivel housing assembly. The lower swivel pin provides the lower pivot point for the steering knuckle, working...

Stub Axle Gasket for the rear drive shaft assembly on Land Rover Series II, IIA, and III. This gasket seals the stub axle flange at the rear axle ...

Swivel Ball Seal Retainer for the front axle swivel housing. This retaining ring clamps the swivel housing oil seal against the swivel ball, holdi...

Axle Oil Level Plug - a brass filler and level plug for the axle differential housing, sealed by an O-ring. It threads into the level/filler port ...

Swivel Shim is a 0.75 mm selective shim from the front axle swivel pin assembly. It is fitted beneath the upper swivel pin retaining plate, where s...

Swivel Pin Housing Shim - 0.13mm (0.005") for the front axle swivel pin housing assembly. This precision shim is fitted between the swivel pin hou...

Rear Axle Half Shaft - RH, part of the disc-braked Salisbury rear axle assembly. The right-hand halfshaft transmits drive from the differential si...

Swivel Pin Kit for the upper front axle swivel assembly, ABS applications. The kit serves the top swivel pin - the pivot interface between the swiv...

Swivel Pin Housing Shim - 0.25mm (0.010") for the front axle swivel pin housing assembly. This precision shim is fitted between the swivel pin hou...

Swivel Pin Housing Shim - 0.075mm (0.003") for the front axle swivel pin housing assembly. This precision shim is fitted between the swivel pin ho...

Front axle drive flange designed to connect the drive shaft to the wheel hub assembly. The flange transmits rotational force from the half shaft ...

Swivel pin & bracket

Shim .003" for swivel pins

Rear Axle Half Shaft - LH, part of the disc-braked Salisbury rear axle assembly. The left-hand halfshaft transmits drive from the differential sid...

Front Halfshaft Bearing - roller bearing supporting the inner end of the front halfshaft within the front axle housing. Located at the inboard end...

Swivel Pin Shim for the front axle swivel housing assembly. This 0.030" shim is fitted beneath the upper swivel pin retaining plate and is used to ...

Rear Differential Drive Flange Kit for the Land Rover (Rover-type) rear axle. The drive flange mounts to the differential pinion and provides the ...

Swivel Pin Shim, 0.010" thick, fitted at the front axle swivel pin housing. The shim is placed beneath the swivel pin (king pin) to set the correc...

Drive Flange & Mudshield Kit for the Salisbury rear axle. The drive flange bolts to the rear hub and couples the axle half-shaft to the hub, t...

Swivel Pin Shim, 0.005" thick, fitted at the front axle swivel pin housing. The shim is placed beneath the swivel pin (king pin) to set the correc...

Swivel Housing Kit for the front axle swivel assembly, for vehicles fitted with ABS. The kit covers one side of the axle. It rebuilds the swivel j...

Driving Member (axle drive flange) for the front and rear hub assemblies. It bolts to the outer face of the hub and engages the splined end of the ...

Driving Member (front hub drive flange) for the front axle hub assembly. It bolts to the outer face of the hub and engages the splined end of the f...

Drive Member - 10-Spline is the drive coupling at the outer end of the axle, forming part of the wheel hub and drive assembly. Its 10-spline inter...

Swivel Housing Kit for the front axle swivel assembly, covering one side of the axle. This is the later configuration, with the steering arm mounte...

Trunnion kit

Transfer Box Intermediate Shaft Shim, 0.005in thick, used in the transfer box to set the end float of the intermediate gear on its shaft. Selectiv...

Drive Flange operates within the rear differential and final drive assembly, providing the bolted coupling that transmits drive torque between the ...

Half Shaft – Rear LH – 10-Spline is the rear axle drive shaft for the left-hand side. It transmits drive from the differential out to the rear hub ...

Stub Axle Washer for the front and rear hub and wheel bearing assembly. The washer locates over the stub axle and seats between the outer wheel bea...

Half Shaft – Rear RH – 10-Spline Short is the rear axle drive shaft for the right-hand side. It carries the drive from the differential out to the ...

Service kit for the front axle swivel housing assembly used on non-ABS axle configurations. The swivel housing forms the pivot joint between the ...

Stub Axle is the front stub axle of the front hub assembly. It bolts to the swivel housing and carries the front hub bearings, on which the hub and...

Front Swivel Pin Kit is a complete overhaul kit for the front axle swivel housings, the steering pivot assembly that allows the front hubs to turn ...

Stub Axle Bolt Fixing bolt that secures the stub axle to the axle case. Clamps the stub axle onto the axle housing as part of the hub and stub axl...

Drive Flange is a torque-transmitting flange fitted to the manual gearbox output. It provides the bolted coupling that carries drive from the gear...

Stub axle kit Def from LA front