Land Rover Axle & Swivel Parts

Drive flange for the front axle drive shaft hub assembly. This component provides the splined connection between the drive shaft and the wheel hub,...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Swivel Housing Washer for the swivel pin housing drain plug, part of the front axle swivel assembly. The sealing washer fits beneath the drain plu...

Swivel Bearing - the bearing on which the front axle swivel pin housing pivots, within the steering swivel assembly. It locates the swivel pin in ...

Swivel Ball Inner Bearing Housing for the front axle swivel assembly. It locates and supports the inner bearing within the swivel ball, maintaining...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Swivel Pin Housing Kit rebuilds the upper pivot of the front axle swivel housing, where the steering knuckle articulates on the axle. This is the v...

Swivel pin housing Series

Front Stub Axle for the front hub and swivel pin housing assembly at the front axle. The stub axle passes through the swivel pin housing and provi...

Stub Axle - rear stub axle carrying the hub and bearings at the rear axle. Bolted to the rear axle casing, it forms the fixed spindle on which the...

Swivel Repair Kit - a service kit for the front axle swivel housing on the early Defender front axle. The swivel housing forms the sealed ball joi...

Swivel Housing: - Classic Defender 90/110/127/130 upto KA930455 (upto and including 1993 modelyear) (NON-ABS) Axle Code 20L, 21L, 22L, 23L, - Disco...

Half Shaft Shim - 0.75mm is a 0.75mm selective shim that fits on the outside of the axle driving member to set the endfloat of the half shaft withi...

Swivel Pin Housing for the front axle, the chrome-finished swivel joint on which the steering swivel and hub assembly pivot. The housing bolts to ...

Shim is a 0.002" adjustment shim for the manual (non-power-assisted) steering box. It is fitted within the steering box to set the correct end-flo...

Swivel Pin

Trunnion

Free-Wheeling Hub Repair Kit for 24-spline manual free-wheeling hubs. Manual free-wheeling hubs allow the front drive members to be disengaged fro...

Swivel Housing Kit providing a complete overhaul of the front axle swivel assembly for one side, supplied complete with the swivel housing ball. T...

This kit installs in the upper swivel pin housing and provides the pivot interface between the swivel housing and axle casing, maintaining correct ...

Swivel Housing Repair Kit for the front axle swivel assembly, non-ABS specification. Supplied for one side. The swivel housing sits at the outer e...

Shim

Free Wheeling Hub Kit - manual locking front-axle hubs that connect or disconnect the front halfshafts from the road wheels. Set to free, the front...

Free-Wheeling Hub Kit - manually operated locking front hubs for a 24-spline front axle, fitted to the front stub axle in place of the standard dri...

Front Halfshaft - Left Hand for the early Discovery 1, transmitting drive from the front differential to the left-hand front swivel housing. The h...

Front Halfshaft - Right Hand for the early Discovery 1, transmitting drive from the front differential to the right-hand front swivel housing. The...

Rear Left-Hand Half Shaft for the 10/24 spline rear axle. The half shaft transmits drive from the differential to the rear wheel hub. This left-ha...

Rear Halfshaft for the Salisbury rear axle, 24-spline, right-hand side. The halfshaft transmits drive from the differential through the axle casin...

Fits Defender (up to KA930455) Includes Corteco seals and Timken bearings for maximum reliability OEM parts for high-quality restoration of your ve...

Swivel Pin Housing for the front axle, the chrome-finished swivel joint on which the steering swivel and hub assembly pivot. The housing bolts to ...

Swivel kit OEM Discovery 1 & Range Rover Classic with ABS

Swivel Pin Kit - Upper for the front axle swivel pin housing assembly. The upper swivel pin forms the top pivot about which the swivel housing rota...

Drive Flange Nut - Front secures the front drive flange (driving member) to the wheel hub, as part of the front hub assembly. It retains the drivi...

Outer Shim - 1.65mm - Front Halfshaft / CV Joint This 1.65mm shim is used to set the end-float of the front halfshaft within the CV joint assembly...

Swivel Housing Repair Kit renews the front axle steering swivel assembly where the swivel housing has become corroded, worn or is leaking. The swi...

Swivel Housing Repair Kit renews the front axle steering swivel assembly where the swivel housing has become corroded, worn or is leaking. The swi...

Swivel Ball for the front axle swivel assembly. The swivel ball is the central spherical component around which the swivel housing rotates, enablin...

Front Halfshaft Bearing - roller bearing supporting the inner end of the front halfshaft within the front axle housing. Located at the inboard end...

Axle Breather Pipe vents the rear Salisbury axle housing. It connects to the top of the axle casing and equalises internal pressure as the axle oi...

Sleeve hub RRC (generic picture, not the actual part).

Swivel Pin Kit overhauls the upper swivel pins of the front axle swivel housings, the pivots the housings turn on for steering. Worn upper pins an...

Restore the performance of your Land Rover Series with this AVM Freewheeling Hub Repair Overhaul Kit. Designed for 10-spline freewheeling hubs, thi...

Stub Axle Kit - the parts needed to replace a rear stub axle on one side of a vehicle fitted with the Salisbury rear axle. The stub axle bolts to t...

Differential Shim, 0.040in, used during differential build to set bearing preload and gear mesh. It sits against the differential carrier side bea...

Drive Flange Joint Washer is the sealing washer installed at the joint between the drive flange and the stub axle, preventing differential oil from...

Rear Stub Axle for the Salisbury rear axle assembly. The stub axle bolts to the outer end of the axle casing and forms the fixed spindle on which ...

Swivel Pin Housing, right-hand side - the ball housing that forms the outer end of the front axle and carries the steering swivel. It is located o...