Land Rover Defender Parts

EGR Pipe for the exhaust gas recirculation system. It routes recirculated exhaust gas within the EGR circuit between the exhaust side and the engin...

Crankshaft Oil Seal - Front seals the front of the crankshaft where it passes through the timing gear cover, retaining engine oil within the timing...

Timing Cover Oil Seal is the front crankshaft oil seal, located in the timing gear cover. It seals around the crankshaft where it passes through t...

Drive Belt Idler and Bearing Kit serves the accessory drive belt system, supplying the idler pulley and its bearing that guide the belt and maintai...

Clutch Control Valve - fitted within the clutch release mechanism, part of the clutch master cylinder and pipe assembly. Regulates hydraulic flow ...

Air Inlet Connection for the exhaust gas recirculation (EGR) system on the Puma TDCi diesel engine. This connection forms part of the EGR pipework...

Trim Panel - interior pillar trim panel finished in Dark Granite. It is a moulded panel that covers a body pillar inside the cabin, providing the ...

Bracket - Rear Body Capping is a mounting bracket that supports the rear body capping. It secures the capping to the rear body structure.

Name Plate

Wiper Arm Cap - the hinged plastic cover that clips over the windscreen wiper arm at the spindle. It conceals and protects the arm-to-spindle reta...

Name Plate - the moulded plastic 'LAND ROVER' oval badge fitted to the front of the vehicle. A direct replacement for a faded, cracked or missing ...

Valve Stem Seal for the cylinder head of the 2.2L Td4 Diesel engine. The seal fits over the valve stem at the valve guide, controlling oil entry a...

Valve Stem Seal for the cylinder head of the 2.2L Td4 Diesel engine. The seal fits over the valve stem at the valve guide, controlling oil entry a...

Coolant Hose connecting the engine oil cooler to the manifold within the cooling circuit of the 2.2L Td4 Diesel. The oil cooler on this engine is ...

Coolant Hose in the engine cooling circuit of the 2.2L Td4 diesel engine. It routes coolant between the engine oil cooler and the manifold, formin...

Cylinder Head Front Cover Gasket for the 2.2 Td4 diesel engine. It seals the joint between the cylinder head front cover and the cylinder head, pr...

Gasket - Cylinder Head Front Cover

Gasket

Gasket - Cylinder Head Front Cover

Door Lockface Gasket for the side door latch mechanism. It seals the interface between the latch (lock face) and the door shut face, keeping water ...

Rear End Door Seal is the floor section of the seal running along the lower edge of the rear end door aperture. It seals the bottom of the rear do...

Windscreen Frame to Bulkhead Seal fits between the base of the windscreen frame and the top face of the bulkhead. It seals the joint where the win...

Roof Assembly Seal for the body weather-sealing system. This seal fits at the roof assembly, forming the weather seal between the roof panel and t...

Camshaft Position Sensor for the 2.2L turbo-diesel engine. The sensor monitors the position of the camshaft and signals the engine control unit, w...

Camshaft Position Sensor for the 2.2L turbo-diesel engine. The sensor monitors the position of the camshaft and signals the engine control unit, w...

Engine Temperature Sensor monitors coolant temperature within the engine cooling circuit. It reports coolant temperature to the engine control mod...

Connecting Rod Bearing Set supplies the big-end bearing shells that run between the connecting rods and the crankshaft crankpins. Machined 0.020in...

EGR Cooler Gasket seals the mounting joint between the EGR cooler and the exhaust gas recirculation circuit on the 2.2L Puma diesel engine. It mai...

Heater Hose - a coolant hose in the heating and ventilation (HVAC) circuit, running between the heater matrix and the engine water pump. It return...

Connecting Rod Bearing Set supplies the big-end bearing shells that run between the connecting rods and the crankshaft crankpins. Machined 0.010in...

Fuel Injector Grommet - a sealing grommet that locates and retains a fuel injector where it passes through the cylinder head cover. It seals aroun...

Heater Hose - a coolant hose within the heating and ventilation (HVAC) circuit. It carries engine coolant between the cooling system and the heate...

EGR Gasket for the exhaust gas recirculation (EGR) system. Seals the flanged joint between the EGR valve and its mating pipework, containing recir...

Brake Pads

Exhaust Clamp securing a joint in the exhaust system. It clamps adjoining exhaust sections together to hold the joint tight and gas-sealed.

Inlet Manifold Gasket for the 2.2-litre turbo-diesel engine, sealing the joint between the inlet manifold and the cylinder head. It maintains an a...

Injector Ring Seal for the Puma 2.2L TDCi 4-cylinder turbo diesel engine, seating in the injector bore in the cylinder head. The seal forms a gas-...

Fuel Injector Screw for the 2.2L 16V four-cylinder turbo diesel (Puma) engine. Retaining screw used in the fuel injector and injector pipe installa...

Cylinder Block Bolt for the 2.2L 16V four-cylinder turbo diesel (Puma) engine. Hex-head bolt used in the cylinder block assembly.

Inlet Valve for the 2.2L 16V four-cylinder turbo diesel (Puma) cylinder head. The inlet valve opens and closes the intake port, admitting the fresh...

Rear Support Bracket - an upper angle bracket providing a mounting point within the rear body structure. Supplied individually.

Drive Belt is the auxiliary (serpentine) drive belt that transmits power from the crankshaft pulley to the engine ancillaries. Routed around the a...

EGR Cooler Gasket for the 2.2L Puma diesel engine, sealing a flanged joint in the exhaust gas recirculation (EGR) circuit. It seals the mating fac...

Heatshield Bracket for the 2.2L (Puma) diesel turbocharger installation. The bracket carries the turbocharger heatshield, holding the shield in po...

EGR Cooler Gasket for the 2.2L Puma diesel engine, sealing a flanged joint in the exhaust gas recirculation (EGR) circuit. It seals the mating fac...