Land Rover Defender Parts

Thermostat Housing for the Puma 2.4L TDCi HPCR diesel engine. The cast housing that encloses the engine thermostat and connects the engine block to...

Front Axle Shim, 0.45mm thick. Fitted to the front axle half-shaft assembly to set the correct end-float, taking up clearance so the shaft is posit...

Oil Seal Housing Gasket for the 300 TDi engine, sealing the rear crankshaft oil seal housing to the rear face of the cylinder block. The gasket fo...

Transfer Box - LT230 43D is a reconditioned two-speed transfer gearbox with a 1.4:1 high-range ratio. The transfer box mounts to the rear of the m...

Anti-Roll Bar Bush for the rear suspension. It locates and insulates the rear anti-roll bar (stabiliser bar) at its mounting to the chassis, allowi...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Cable Gaiter is a flexible protective sleeve and grommet fitted at the door aperture, routing the door wiring harness between the body and the door...

Crankshaft Oil Seal is the rear crankshaft (rear main) oil seal for the 2.2L and 2.4L Duratorq TDCi Puma diesel engine. It seals the rear of the c...

Side Lamp Lens - Front - Clear is the replaceable lens for the front side and indicator lamp within the exterior lighting assembly. The clear lens...

Starter Motor - Electric

Engine Mount - Rubber - Diesel supports the engine on the chassis and isolates it from the vehicle structure. The bonded rubber element absorbs co...

Set - 200 TDi Head Including Bolts

Caliper - Assembly

Panhard Rod Bush Set for the front suspension lateral location assembly. Each bush in this set is pressed into the Panhard rod eye and provides th...

Clutch Plate

Door Seal - Front - Top is the weatherstrip that closes the joint between the top edge of the front door and the roof cant rail, forming part of th...

Exhaust Manifold Locking Washer that secures the exhaust manifold fixings to the cylinder head. The tab washer fits under the manifold bolt or nut...

Distributor Cap for the Lucas distributor fitted to the four-cylinder petrol engine, part of the ignition system. The cap seats over the distribut...

Wheel Nut for alloy wheel fitment on Defender, Discovery 1 and Range Rover Classic. This tapered-seat wheel nut is designed for use with alloy whe...

Main Bearing Set for the 2.5L 4-cylinder engine (200 TDi, 300 TDi and the related 2.5 diesel and petrol units), supplied at standard size. The mai...

Pipe Clip, a routing clip that retains pipework and small-bore lines against the chassis, body or transmission casing. It supports breather, fuel,...

Cam Cover Gasket - Td5 - Late Type

Nyloc Nut - M16 flanged self-locking nut used at suspension link fastenings. The integral flange spreads the clamp load across the joint face and ...

Bow Shackle Bow-shaped recovery shackle with a threaded pin, used to connect a recovery strap or rope to a recovery point on a winch bumper. The w...

Headlamp Kit

Timing Cover Plate Gasket sealing the timing gear cover plate on the 300Tdi 2.5L four-cylinder turbo diesel engine. The gasket forms the joint bet...

Front Crankshaft Oil Seal for the 2.5L 300TDi turbo diesel engine. It fits around the crankshaft nose at the front of the engine, sealing the point...

Thermostat for the 2.5L 200TDi diesel engine, operating within the thermostat housing at the top of the cooling circuit. This thermostat opens at ...

Thermostat - 88°C for the cooling system of V8 petrol engines. The thermostat regulates coolant flow between the engine block and the radiator, al...

Transmission Handbrake Shoe Set is the friction pair for the drum-type parking brake mounted on the rear output of the transfer box. When the hand...

Fuel Injector - Nozzle and Holder Assembly for the 2.4L Duratorq-TDCi HPCR 140PS Puma diesel engine, part of the high-pressure common-rail injectio...

Linkage - Wiper

LWB Rear Seat Assembly

Bearing Set 030

LED Side Repeater is an amber side repeater lamp within the exterior signalling circuit, mounted in the front wing aperture. Each lamp provides la...

Camshaft Cover for the Puma 2.4L TDCi diesel engine. This cover encloses the top of the cylinder head, housing and protecting the camshaft and valv...

Camshaft Retaining Plate for the four-cylinder engine. Bolted to the front face of the cylinder block behind the camshaft gear, it locates the cams...

EGR Valve for the 2.4L and 2.2L Puma TDCi diesel engines, fitted within the exhaust gas recirculation circuit. The EGR valve meters a controlled p...

Seal Retainer for the rear door aperture at the tailboard. The retainer is a profiled strip that clamps the rear door weatherseal and the trailing...

EGR Valve for the 2.4L and 2.2L Puma TDCi diesel engines, fitted within the exhaust gas recirculation circuit. The EGR valve meters a controlled p...

Front Floor Mat Pair covering the driver and front passenger footwells, supplied as a matched set of two. Shaped to the contour of the front floor...

Driving Member (front hub drive flange) for the front axle hub assembly. It bolts to the outer face of the hub and engages the splined end of the f...

Oil Pressure Switch for the engine lubrication system warning circuit. This pressure-sensitive switch threads into the engine block oil gallery an...

Front Crankshaft Oil Seal for the 2.5L 300TDi turbo diesel engine. It fits around the crankshaft nose at the front of the engine, sealing the point...

Seat Re-trim Kit refurbishes one complete front outer seat in a Techno vinyl finish and is supplied complete with contact adhesive spray. The kit ...

Thermostat for the 2.4L Duratorq-TDCi Puma diesel engine, located in the coolant circuit at the oil cooler and filter housing. The thermostat regu...

Gear Knob - gear lever knob for the R380 5-speed manual gearbox. Threads onto the gearchange lever, forming the driver's hand grip and gear-select...

Oil Pressure Switch - threaded into the oil filter/cooler housing on the engine lubrication circuit, it senses engine oil pressure. It signals the...