Land Rover Defender Parts

Bolt - M12 × 160 mm hex-head bolt used as a chassis and suspension fixing. It secures suspension radius arms and links, the top link fulcrum and ba...

Side Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...

Safari Rear Door Skin - Lower Half. The outer sheet-metal panel for the bottom half of the rear side door (the Safari door), supplied as a repair s...

Seal rear side door RH GENUINE LR

Vertical Drain Channel is a body-side glazing channel fitted to the rear side door. It runs vertically within the door frame to guide the edge of ...

Shock Absorber for the rear coil spring suspension system. This big-bore unit is designed for heavily laden and expedition applications where sust...

Wiper Switch Assembly

Cable Tie, Panel Fixing: grey cable tie strap with a panel fixing, 4.6 x 165 mm.

Door Speaker An original-fit speaker for the in-car audio system. It reproduces the audio output of the radio/head unit through the vehicle's spea...

Repeater Side Clear LED Pair

High Mounted Stop Lamp is the centre high-mounted stop lamp within the rear lighting assembly, positioned above the main rear lamp clusters. It il...

Rear Fog Lamp is part of the rear lighting assembly, mounted at the rear of the vehicle. The lamp produces a high-intensity red light to improve t...

Cup Washer for securing the instrument panel to the engine cowl on the Defender 90 and 110. This pressed steel cup-type washer fits beneath the in...

Fuel Pipe forms part of the low-pressure fuel supply circuit, carrying diesel from the fuel pump to the fuel filter. Fitted to the Td5 2.5L 5-cyli...

Exhaust Downpipe - the front section of the exhaust system, connecting the turbocharger outlet to the intermediate exhaust pipe. Fitted to the 2.4...

Rubber Floor Mat Set - Front for the front footwells, supplied as a matching pair. The mats are moulded in rubber to protect the front floor area a...

Sump Plug for the engine oil sump drain. Fitted to the sump drain port and removed at each oil change to drain the engine oil. The sealing washer ...

Layshaft Bearing for the LT77 and R380 5-speed manual gearbox fitted to the Defender, Discovery 1, Discovery 2, and Range Rover P38. The layshaft ...

Universal joint

Propshaft rear Defender 130 TD4

Front Hub Bearing Spacer for the Defender's front hub assembly, 15.2 mm thickness, identified by the blue colour coding. This precision spacer sit...

Hub Bearing Spacer - 15.3mm - Red used in the front axle hub bearing assembly. This colour-coded spacer sits within the hub between the inner and ...

Hub Bearing Spacer - 15.4mm - Yellow used in the front axle hub bearing assembly. This colour-coded spacer sits within the hub between the inner a...

Steering Damper - 4-Stage Adjustable for Land Rover Defender 90, 110, and 130. This hydraulic steering damper mounts between the axle and chassis ...

Intercooler Hose Kit replaces the standard rubber hoses in the intercooler circuit of the Defender 2.4L TDCi (Puma) engine. This kit includes the ...

Brake Hose Kit - Stainless Steel - +50mm Extended for the hydraulic braking circuit on Defender 90, manufactured by Goodridge. This 3-line kit rep...

Front Cat-Delete Down Pipe replaces the catalytic converter section of the front exhaust on the Defender 2.4L TDCi (Puma). Manufactured from 1.5mm...

Anti-Roll Bar for the rear suspension, 28mm bar diameter. The bar mounts to the chassis on a pair of clamped bushes and connects to the axle throu...

All-Terrain Suspension Kit - 2-Inch Lift, Medium Load for Defender 110 and 130, by Terrafirma. This spring and shock absorber upgrade raises the ve...

Suspension Kit providing 2 inches of lift in a medium load configuration, combining rated coil springs with All Terrain shock absorbers. Designed ...

Shock Absorber for the rear suspension, controlling axle movement and damping spring oscillation between the axle and the chassis mounting points. ...

Front Shock Absorber provides damping control on the front axle for suspension raised by approximately 50 mm. Twin-tube big-bore construction with...

Rear Coil Spring - Heavy Load for the Defender 90, rated for heavy load applications at standard ride height. The spring installs in the rear spri...

Rear Coil Spring Pair - Medium Load, +2" Lift (Terrafirma). These rear coil springs raise ride height by approximately 2 inches over standard and ...

Engine Stud is a threaded fastening stud used in the cylinder head and manifold assemblies of the four-cylinder engine. It provides the fixed thre...

Stud

Steering Box is the steering gear at the heart of the power-assisted steering circuit. It converts steering-wheel rotation into lateral movement o...

Bulkhead Outrigger Tie Bracket for the right-hand side, part of the chassis and bulkhead support structure. The bracket ties the bulkhead to the o...

Fuel Pipe - Cylinder No.4 for the 200TDi 2.5L four-cylinder turbodiesel, part of the high-pressure fuel injection circuit. This steel injection pi...

Water Pump circulates coolant through the engine cooling system. It mounts to the front of the 2.25L petrol engine and is driven by the auxiliary ...

12N 7-Pin Trailer Socket for the towing electrical system, mounted at the rear of the vehicle. The 12N socket carries the standard trailer road-li...

Locking Wheel Nut for replacing one standard wheel nut per wheel as a theft deterrent. The locking wheel nut features a unique external drive prof...

Rear Quarter Panel for the right-hand side, part of the rear body structure. This is the outer body panel that forms the rear side of the vehicle ...

Rear ABS Sensor Kit for the Anti-lock Braking System. A passive wheel speed sensor that generates a voltage signal as the teeth of the rear axle r...

Injector Pipe - No.4 is a rigid high-pressure fuel line in the injection circuit of the 2.5L 300 TDi turbo diesel engine. It carries metered fuel ...

Kit - 7 Inch Headlamp Fixing - Series - Defender

Brake Caliper Piston Kit - replacement pistons for the rear brake caliper. The pistons run in the caliper bores and, under hydraulic pressure, pre...

Fuel Tank Sender Unit for the fuel level monitoring system. The sender unit mounts through the top face of the fuel tank and measures fuel level v...