Land Rover Defender Parts

Door Card is the interior trim panel that finishes the inner face of the door, concealing the door structure, latch and window mechanism while carr...

XD Wing Vent is a styling vent for the front wing, shaped to replicate the air-intake pre-filter fitted to XD, Wolf and WIMK military-specification...

Door Card is the interior trim panel that finishes the inner face of the door, concealing the door structure, latch and window mechanism while carr...

HD Half Shafts - Front - Pair

Front Brake Pad Kit - friction pad set for the front disc brake assembly, for the 380 mm front disc and size 20 caliper configuration. The pads lo...

In-Tank Fuel Pump mounted within the fuel tank as part of the fuel delivery system. It draws fuel from the tank and supplies it under pressure to ...

On-Board Air Load-Assist System (Load Controller II) – the air supply and control circuit for rear air helper springs. The system feeds both rear ...

Skeleton Rock Sliders - 130

EGR Valve for the exhaust gas recirculation system. The valve meters a controlled portion of exhaust gas back into the intake tract to lower peak c...

Cylinder Block Ladder Stiffener - the ladder-frame reinforcement in the lower crankcase of the 2.4L Duratorq-TDCi HPCR 140PS diesel engine. The st...

Transmission Oil Pan for the ZF 8HP eight-speed automatic transmission. It bolts to the underside of the transmission case and retains the automati...

Heated Front Windscreen - front glazing panel with an integral electrical heating element, fitted in place of the unheated screen in the windscreen...

Cooling Fan for the 2.2L Puma TDCi diesel engine - a viscous coupling with an integral fan blade that mounts on the water pump drive. The temperat...

Compomotive Alloy Wheel 8" x 18" - Black

Water Manifold which forms part of the engine cooling circuit, distributing coolant between the engine and the cooling system. For the 2.2 Td4 die...

Water Manifold which forms part of the engine cooling circuit, distributing coolant between the engine and the cooling system. For the 2.2 Td4 die...

Engine oil pump assembly for the Td5 2.5L 5-cylinder turbo diesel, forming part of the engine lubrication circuit. The pump is driven from the cra...

Electric Window Kit - Rear Door

Compomotive Alloy Wheel 8" x 18" - Grey

Swivel Pin Housing, left-hand side - the ball housing that forms the outer end of the front axle and carries the steering swivel. It is located on...

Swivel Pin Housing, left-hand side - the ball housing that forms the outer end of the front axle and carries the steering swivel. It is located on...

Timing Belt Cover for the 2.5L 300TDi diesel engine, forming part of the front timing belt enclosure. The cover sits over the toothed timing belt ...

Air Conditioning Condenser - heat exchanger in the air conditioning refrigerant circuit, mounted ahead of the engine cooling radiator in the front ...

Brake Pedal Assembly mounted in the pedal box of the braking system. The assembly transmits driver pedal effort to the brake servo pushrod, pivoti...

Air Conditioning Compressor is the driven pump of the air conditioning refrigerant circuit, drawing low-pressure refrigerant vapour from the evapor...

Skeleton Winch Bumper - Cranked

Oil Cooler for the 5.0-litre supercharged V8 petrol engine (AJ133). It forms part of the engine lubrication circuit, transferring heat from the eng...

Leather Gear Box & Transfer Box Levers

Clutch Repair Kit

Oil Pump for the engine lubrication system of the supercharged petrol V6 and V8 (AJ133) engines. Driven from the crankshaft, the oil pump draws oi...

Terrafirma All Terrain Suspension Kit - Heavy Load - Standard Height - Defender 110/130

Skeleton Winch Bumper - Cranked + AC

Brake master cylinder for vehicles fitted with the four-wheel anti-lock braking system. It sits in the brake hydraulic circuit between the brake se...

Commercial Winch Bumper - Without Air Conditioning - heavy-duty front bumper with an integrated winch mounting platform, replacing the standard fro...

Radiator is the primary heat exchanger of the Engine Cooling System, transferring heat from the engine coolant to the air drawn through the front c...

Fan Assembly

Fan Assembly

EGR Connecting Tube for the 2.4 and 2.2 Puma TDCi diesel engines, forming part of the exhaust gas recirculation circuit within the emission control...

Blower motor for the air conditioning evaporator assembly, mounted in the HVAC intake housing. Drives the fan that draws air across the evaporator...

Battery - Wet Non-Spillable - sealed lead-acid starting and deep-cycle battery with dual terminals. Rated at 68 Ah with 1500 cranking amps. The pl...

Vacuum Pump supplying the brake servo on the supercharged AJ133 petrol engines (3.0L V6 and 5.0L V8). Forced-induction petrol engines cannot rely ...

Suspension Lift Kit supplying the complete front and rear coil spring and shock absorber set in one package, raising ride height by approximately 2...

Suspension Kit - Heavy Load - +2" Lift is a matched front and rear spring and damper set supplied as a single package, pairing +2" (50 mm) lifted c...

Monotube Suspension Kit - standard ride height, standard load. A matched set of shock absorbers and coil springs covering both axles, grouped under...

Suspension Kit - Medium Load - +2" Lift is a matched front and rear spring and damper set supplied as a single package, pairing +2" (50 mm) lifted ...

Fuel Injector for the 2.0L AJ200 (Ingenium) four-cylinder diesel engine. The injector delivers a metered, high-pressure spray of diesel into the c...

Suspension Lift Kit supplying the complete front and rear coil spring and shock absorber set in one package, raising ride height by approximately 2...