Land Rover Defender Parts

Exhaust Manifold for the 2.5L 4-cylinder petrol engine. Bolts to the exhaust ports on the cylinder head and collects the exhaust gases from each cy...

Banjo Bolt - M10 is the hollow fastener used to secure the oil feed pipe at the block-to-head junction in the lubrication circuit of the 2.25L and ...

Special Bolt for retaining the tappets in the cylinder block, part of the camshaft and tappet assembly. This is a specific-design fastener that se...

Camshaft O-Ring for the 2.5L four-cylinder diesel engines, including the naturally aspirated diesel, turbo diesel and 200TDi. This O-ring forms th...

Front Silencer for the Defender 110 200Tdi exhaust system, covering vehicles produced from 1990 to 1994. This silencer fits in the front section o...

Intercooler Hose for the Td5 2.5L 5-cylinder turbo diesel, part of the charge-air system between the intercooler and the engine. It carries cooled...

Exhaust Bracket for the rear of the exhaust system, securing the rear pipe section to the chassis. It forms the mounting point that carries the re...

Air Cleaner Hose for the 2.5L TDi engine air cleaner assembly on the Defender. This hose connects within the air cleaner housing assembly, forming...

Intake to Dump Valve Hose for the 300TDi 2.5L turbocharged diesel engine on the Defender. This hose connects the air intake duct to the dump valve...

Intercooler Hose for the 200 TDi turbocharged induction system. Part of the charge-air ducting that links the intercooler into the boost circuit, ...

Idler Pulley for the air conditioning auxiliary belt drive on 300TDi engines. This pulley operates within the A/C belt drive circuit, maintaining ...

Oil Separator Gasket for the Td5 2.5L 5-cylinder turbo diesel engine. This gasket seals the oil separator to the cam cover, preventing engine oil ...

Cylinder Head Gasket for the 2.5L 200/300 TDi turbo diesel engine, sealing the joint between the cylinder head and the engine block. It seals the ...

Connecting Rod Bolt for the engine bottom end, clamping the big-end bearing cap to the connecting rod around the crankshaft journal. Working as a ...

Crankshaft Pulley Bolt for Land Rover 4-cylinder engines from approximately 1989, used across the Defender, Discovery 1, and Range Rover Classic fi...

Drive Belt is the serpentine (poly-vee) accessory belt for the 4.0L V8 EFI petrol engine fitted with air conditioning. Driven from the crankshaft ...

Crankshaft Pulley Bolt for the 2.5L 300TDi diesel engine. This bolt secures the crankshaft pulley and torsional vibration damper to the nose of the...

Camshaft Sprocket - GEMS V8 is the timing chain sprocket fitted to the camshaft of the Rover GEMS 4.0L and 4.6L V8 petrol engine. The sprocket is ...

Throttle Potentiometer Gasket seals the throttle position sensor (throttle potentiometer) to the throttle body on the V8 EFI system. It forms the ...

Boost Pipe Assembly for the 2.5L 300 TDi turbo diesel, part of the turbocharger boost control circuit. It connects the inlet manifold to the injec...

Oil Dipstick Tube for the 300 TDi engine, guiding the dipstick down into the sump. Houses and locates the engine oil dipstick, providing the passa...

Injection Pump Gasket for the fuel injection pump assembly on the 2.5L 4-cylinder naturally aspirated and turbocharged diesel engines. Seals the m...

Thermostat Housing for the 2.5L 300TDi 4-cylinder turbo diesel engine. This housing secures the engine thermostat within the cooling circuit and f...

O-Ring - Oil Pick-Up Pipe for the 2.5L 300TDi 4-cylinder turbo diesel engine. This O-ring seals the oil pick-up pipe connection at the oil pump or...

Cylinder Block Seal is a 16mm sealing washer fitted to the cylinder block of the Rover V8 petrol engine, closing off a machined passage in the bloc...

Air Cleaner Bracket supports the air cleaner housing on the intake system of the 300TDi diesel engine.

Idler Pulley for the air conditioning auxiliary belt drive on 300TDi engines. Positioned within the A/C belt routing circuit, this pulley guides t...

Connecting Rod Bolt for the Rover V8 EFI petrol engine, part of the connecting rod assembly in the engine bottom end. The bolt clamps the connecti...

Flywheel Dowel is a locating dowel that registers the flywheel to the crankshaft rear flange. Pressed into the crankshaft flange, it sets the angu...

Oil Separator Drain Hose for the crankcase ventilation system on the 2.5L naturally aspirated diesel and 200TDi turbo diesel engines. It drains th...

Front Cover Gasket sealing the timing cover to the front face of the cylinder block on the 300TDi 2.5L turbo diesel engine. It forms the oil-tight...

Pulley

Oil Pump Assembly for the engine lubrication system of the 4-cylinder non-TDi engine range. Driven from the engine, the pump draws oil from the su...

Flywheel Housing Stud for the 2.5L four-cylinder diesel engine. It secures the flywheel housing to the rear face of the engine, locating the housin...

Cylinder Liner - the replaceable liner that forms the bore in which the piston and rings run within the cylinder block. It provides the hard weari...

Dipstick Tube - the guide tube through which the engine oil level dipstick passes down into the sump. It locates in the cylinder block and directs...

Joint Washer is a sealing washer fitted at a bolted or threaded joint on the 4-cylinder diesel engine, forming a seal between the mating faces to p...

Conrod Bolt for Land Rover petrol and diesel four-cylinder engines. This bolt secures the connecting rod cap to the connecting rod, clamping the b...

Power Steering Belt is the V-belt that drives the power steering pump from the crankshaft pulley, in the non-air-conditioned engine configuration. ...

Distributor Drive Gear for the Rover 3.5L V8 petrol engine. The gear forms part of the ignition distributor drive assembly, transferring rotationa...

Door Trim Retaining Clip is a cup-type fastener that secures the interior door casing to the door frame. The clip locates in the trim panel and pu...

Splash Seal

LED Daytime Running Lights - a pair of Ring LED running lamps for the DA8600 front bumper. Each lamp uses 5 x 1.5W LEDs and measures 57 mm (H) x 1...

Side Indicator is a wing-mounted side repeater lamp in the vehicle's direction-indicator circuit, supplied as a pair. Each unit uses LED elements ...

Service Kit for the 2.2L Puma TDCi diesel engine - the consumable filters and sump drain plug needed for a routine oil-and-filter service. The kit...

Seat Re-trim Kit (Inner) re-covers the front centre seat, renewing the cushion and squab foams together with their outer covers to restore the seat...

Clutch Kit renews the friction components of the Td5 driveline clutch and is supplied without the release bearing. The kit comprises the clutch co...

Front Electric Window Kit converts both front door windows from manual wind-up to electric operation. The kit includes two electric window regulat...