for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
Exterior Mirror - complete right-hand door mirror assembly with a power-folding head. The housing carries the mirror glass and an electrically ope...
View full detailsExhaust Silencer is the rear silencer and tailpipe assembly on 2.0L diesel applications. Installed in the rear section of the exhaust, it attenuat...
View full detailsRear Passenger Rubber Mat Set is a set of drop-in mats that protect the rear passenger floor area from dirt, moisture and wear. Moulded to the con...
View full detailsGlovebox Lamp Assembly is the interior illumination lamp that lights the glove box compartment, forming part of the vehicle's interior lighting cir...
View full detailsFront Bumper Assembly is the complete moulded front bumper, supplied with the integrated front fog lamps fitted. It mounts across the front of the...
View full detailsCover bonnet hinge Freelander LH
Track Rod Adjuster forms the threaded, adjustable joint in the steering track rod, allowing the effective rod length to be set. It sits within the...
View full detailsWind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsCrossmember front lower Freelander
Front Rubber Mat Set is a set of drop-in footwell mats that protect the front floor from dirt, moisture and wear. Moulded to the contour of the fr...
View full detailsFuel Tank Inspection Plate Seal is a rubber sealing gasket for the fuel tank inspection plate in the fuel tank assembly. The inspection plate prov...
View full detailsRelay - normally open 4-pin relay for use in the underbonnet fuse and relay box. In its de-energised state the load contacts are open; energising t...
View full detailsCoolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...
View full detailsAir Duct is the upper engine air intake hose on the Freelander 1, connecting the air filter housing to the engine intake. This duct routes filtere...
View full detailsInjector Sealing Washer seals each fuel injector into the cylinder head within the diesel fuel injection system, for 200 TDi and 300 TDi turbo-dies...
View full detailsDrive Shaft - Assembly
Bonnet Insulation Clip retains the sound-and-heat insulation pad to the underside of the bonnet. The clip secures the insulation pad against the b...
View full detailsDoor Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...
View full detailsAir Conditioning Compressor for the refrigerant circuit on 2.0L diesel applications fitted with air conditioning. Belt-driven from the engine, the...
View full detailsBonnet Assembly - the hinged body panel that closes over the engine compartment, forming part of the front body structure. It pivots on the bonnet...
View full detailsFront Wing Assembly - Left Hand is the outer body panel covering the front wheel arch on the left-hand side of the vehicle. It forms the front-lef...
View full detailsLocking Wheel Nut Set - anti-theft security for the road wheels. Replaces standard wheel nuts with keyed locking nuts that can only be removed usi...
View full detailsEGR Valve Control - vacuum control valve in the exhaust gas recirculation (EGR) system. Regulates the vacuum signal that operates the EGR valve, c...
View full detailsSuspension Damper
Suspension Damper
Filter - Air
Exhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...
View full detailsJoint - Universal - Propshaft - Less V6
In-Tank Fuel Pump for the 2.0L Td4 diesel fuel delivery system. Mounted inside the fuel tank, the pump draws diesel from the tank and delivers it ...
View full detailsHD Rear Bumper
Exhaust Manifold Gasket for the 1.8L K-Series petrol engine, part of the exhaust manifold assembly. It seals the joint between the exhaust manifol...
View full detailsFront Brake Pad Set Front axle disc brake pads, part of the front disc brake assembly. The pads are carried in the front caliper and are clamped a...
View full detailsTrim Clip (Scrivet) is a two-piece plastic push-fit fastener used to secure trim panels, facia sections, splash shields and other clipped-in compon...
View full detailsWasher Non-Return Valve for the windscreen wash/wipe system. The valve is fitted into the washer fluid line between the pump and the jets. It perm...
View full detailsEngine Tie Rod - lower torque rod within the engine mounting system. It ties the powertrain to the subframe and resists the fore-and-aft rocking (t...
View full detailsEngine Oil Filter for the 2.5L KV6 V6 petrol engine. Cartridge-type (replaceable element) filter that installs in the oil filter housing to clean ...
View full detailsBrake Shoe Set
Oil Filter for the Freelander 1 fitted with the 2.0L L Series Diesel engine. Replaces the engine oil filter as part of a routine oil service. The ...
View full detailsBrake Pad Set is a set of front disc brake friction pads for the front-axle braking assembly. The pads locate in the front brake calipers and are ...
View full detailsFront Brake Disc - solid (non-vented) front brake disc, 262 mm diameter. Provides the friction surface that the front brake pads clamp against to ...
View full detailsFront Brake Pad Set Front axle disc brake pads, part of the front disc brake assembly. The pads are carried in the front caliper and are clamped a...
View full detailsBrake Caliper - Front - Left-Hand is part of the front disc brake assembly on the Freelander 1. The caliper houses the hydraulic pistons and brake...
View full detailsStop/Tail Bulb - 12V 21W - Twin Pack (trade reference 380). This pack contains two BAY15d dual-filament bayonet bulbs rated 12V 5/21W, suitable fo...
View full detailsRadiator Hose – Lower for the engine cooling system. The lower radiator hose returns cooled coolant from the bottom of the radiator to the engine,...
View full detailsABS Sensor Kit - Front
Rear Bumper Lamp, Right-Hand Side. Lamp unit installed in the right-hand side of the rear bumper, forming part of the rear exterior lighting assemb...
View full detailsLand Rover Oval Name Badge - Plastic - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground, moulded in ...
View full detailsBrake Pad Set is a set of front disc brake friction pads for the front-axle braking assembly. The pads locate in the front brake calipers and are ...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.