Land Rover Freelander Parts

Windscreen Wiper Blade for the front wash-wipe system. This is the front wiper blade for the passenger-side arm on left-hand-drive vehicles, sweep...

Windscreen Wiper Blade for the front wash-wipe system. This is the front wiper blade for the driver-side arm on left-hand-drive vehicles, sweeping...

Parking Aid Sensor is an ultrasonic sensor for the Parking Distance Control (PDC) system. Mounted in the bumper, it emits and receives ultrasonic ...

Fuel Pump Support Housing Seal seals the mounting interface of the high-pressure fuel pump support housing on 2.0L Si4 petrol engines. The high-pr...

Turbocharger Oil Return Hose Gasket for the 2.0L Si4 TIVCT petrol turbo engine. It seals the joint at the turbocharger oil return (drain) hose, al...

Door Handle Lock Cap for the exterior door handle. It fits over the lock mechanism aperture in the handle, covering and protecting the locking com...

Bumper Bracket Mounting

Bumper Bracket Mounting

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Connector

Engine Mounting (mounting insulator / support bracket) for the 2.2L diesel engine, part of the powertrain mounting system. It combines a bonded rub...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Water Pump for the 3.2L DOHC petrol inline-six - the circulating pump of the engine cooling system. The pump draws coolant from the radiator outle...

Front spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...

Turbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...

Cover - Fuel Sender

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Wheelhouse Splash Shield fitted in the front wheel arch to close off the wheelhouse from the engine bay. It shields the components behind the whee...

Hose - Radiator

Major Service Kit - 2.2L Td4 Diesel

Shock Absorber Bracket in the rear suspension. It locates and secures the rear shock absorber, providing the mounting point that ties the damper t...

EGR Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals a joint in the EGR circuit, maintaining a gas-tig...

Rear Coil Spring is a road spring for the rear suspension. It supports rear ride height and absorbs road inputs, seating between the lower suspens...

Door Handle Cap for the exterior door handle assembly, fitting at the outer end of the handle in the position the lock barrel would otherwise occup...

Cylinder Head Gasket seals the joint between the cylinder head and the cylinder block on the 2.2L 16V common-rail diesel engine (DW12), containing ...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Tank - Radiator Overflow

Engine Mounting (mounting insulator) for the 2.2L diesel engine, part of the powertrain mounting system. It combines a bonded rubber element with m...

Engine Mounting (support bracket / insulator) for the 3.2L Si6 petrol inline-six engine, part of the powertrain mounting system. It carries engine ...

Rear suspension bump stop - part of the rear damper and coil spring assembly. The moulded rubber bump stop fits over the shock absorber piston rod...

Front Axle Output Seal - RH Outer - the outer oil seal on the right-hand output of the front axle case. It seals around the differential output fl...

Parcel Shelf Catch Clip is the retaining catch for the load compartment cover (parcel shelf), part of the loadspace trim assembly. Supplied in an e...

Temperature Sensor

Bar Assembly - Roll

Splash Shield - a rear wheelarch protector fitted to the inner rear side panel as part of the body underbody protection. It lines the rear wheelar...

Parking brake adjuster for the rear drum-in-disc parking brake assembly. The adjuster sits between the parking brake shoes and sets the running cl...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Shock Absorber - Front Suspension

Transmission Drain Plug for the automatic transmission. Seals the fluid drain point on the AWF21 6-speed automatic transmission. Removed to drain ...

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...

Water Pump circulates coolant through the engine cooling system. Driven from the engine, it pumps coolant through the block, cylinder head and rad...

Door Moulding - outer trim moulding for the front left-hand door. It fits along the outside of the front door to protect the panel and finish the ...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

O-Ring, 6.07 x 1.78mm - sealing ring for the power steering pressure and return pipe connections. It fits into the union at the pipe end and is co...

Coolant Hose - EGR cooler to heater inlet hose. Carries coolant from the EGR cooler outlet to the heater matrix inlet, linking the exhaust gas rec...

Rear Suspension Arm Bush - rear-position bush for the rear suspension arm assembly. The bush is pressed into the suspension arm at its rear mounti...