for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
Relay - Normally Open is a plug-in make-contact relay used in the vehicle fuse and relay panel. The relay closes its high-current main contacts on...
View full detailsAir Temperature Sensor for diesel applications, forming part of the engine management sensing circuit on the air intake side. The sensor measures ...
View full detailsFully synthetic engine oil, SAE 5W-40 - 5 litre container. Engine lubrication system. A 5W-40 multigrade: the 5W winter rating gives cold-start fl...
View full detailsFully synthetic engine oil, SAE 5W-40 - 1 litre container. Engine lubrication system. A 5W-40 multigrade: the 5W winter rating gives cold-start fl...
View full detailsBoost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...
View full detailsBoost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...
View full detailsEmergency Bulb and Fuse Kit - 12 volt, for vehicles using H4 headlamp bulbs. A compact set of replacement bulbs and fuses to carry in the vehicle,...
View full detailsDoor Casing Stud - plastic push-fit stud used to secure interior trim panels to the door frame and body structure. The stud passes through the tri...
View full detailsFront Indicator Bulb - PY21W amber signal bulb, 12V 21W, with a BAU15s offset-pin bayonet base. It fits the front direction indicator lamp. The am...
View full detailsFlanged Screw - threaded fastener with an integral flange head that spreads the clamping load, used in vehicle assembly.
Air Conditioning Expansion Valve for the refrigerant circuit. It meters high-pressure liquid refrigerant into the evaporator, where the resulting p...
View full detailsBolt Flanged hex-head bolt. Used to secure the timing belt and tensioner on diesel engines, and as a starter motor and drive plate fixing.
Anti-Squeal Shim - Set of 4 is a set of self-adhesive noise-dampening shims for disc brake pads. Each shim is cut to shape and bonded to the steel...
View full detailsLED Festoon Bulb for interior lamps. A double-ended festoon LED that replaces the standard filament festoon bulb in the courtesy, map and interior...
View full detailsTouch-Up Paint Pencil in Bonatti Grey Metallic (paint code 19K512). The pencil applies a small quantity of colour-matched paint to stone chips and...
View full detailsClip — a 6 mm Starlock push-on retaining washer used as a general-purpose fastener across several systems, including exhaust mounting, trim and oth...
View full detailsHose Clip, a general-purpose clip for securing hose connections across the engine bay. It clamps a hose onto its pipe or stub and holds the joint ...
View full detailsTiming Bolt, M10 x 20 - socket head fixing from the timing drive assembly. On belt-driven diesel applications the bolt secures the timing belt ten...
View full detailsSelf-Tapping Screw - a fastener that forms its own mating thread as it is driven, allowing a panel or housing to be secured without a pre-tapped ho...
View full detailsDoor Check Pin - the pivot pin that retains the door check link (check strap) to its mounting bracket on the body pillar. The check link limits ho...
View full details40A Fuse is a circuit-protection device within the vehicle electrical system. Rated at 40 amps, it protects its associated circuit by interrupting...
View full detailsCylinder Block Dowel is a precision locating dowel for the engine cylinder block. Pressed into the block, it positively locates a mating component...
View full detailsHex Nut is an M8 copper flanged-head nut used on the exhaust manifold. The flanged head spreads the clamping load and removes the need for a separ...
View full detailsInsulation Pad Clip A fir-tree style retaining clip that holds the under-bonnet sound-deadening and heat insulation pad in place. The clip pushes ...
View full detailsDoor Check Pin - pivot pin for the door check (door stay) mechanism. It retains the door check arm at the hinge pillar, allowing the check strap t...
View full detailsBonnet Insulation Clip retains the sound-and-heat insulation pad to the underside of the bonnet. The clip secures the insulation pad against the b...
View full detailsDoor Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...
View full detailsStop/Tail Bulb - 12V 21W - Twin Pack (trade reference 380). This pack contains two BAY15d dual-filament bayonet bulbs rated 12V 5/21W, suitable fo...
View full detailsTowing Bracket Slider Lock Pin is the pin that locks the vertical slider of a Dixon Bate adjustable-height towing bracket at the selected height. ...
View full detailsOxygen Sensor - Front is the upstream (pre-catalyst) lambda sensor in the exhaust system of the petrol engine. Threaded into the exhaust downpipe ...
View full detailsRegulator - Fuel Pressure
Oxygen (Lambda) Sensor for the rear, post-catalyst position in the exhaust system. Mounted in the downpipe downstream of the catalytic converter, ...
View full detailsBrake Light Switch, the stop lamp switch mounted at the brake pedal. When the brake pedal is depressed the switch closes the stop lamp circuit to ...
View full detailsCoating Spray Gun, bottle-mount type, for applying protective coating. This Schutz-style gun screws directly onto the 750ml coating bottle, so no s...
View full detailsjoint washer, various applications, mostly BMW engines. L322 - Oil Pan/Oil Level Indicator M62 B44 4.4 V8 Petrol L322 - Oil Pan/Oil Level Indicato...
View full detailsDowel is a hollow locating dowel ring that aligns two mating housings during assembly, holding their faces in register and taking shear load off th...
View full detailsSynthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...
View full detailsWash/Wipe Column Switch mounted on the steering column, forming part of the windscreen wiper and washer control switchgear. The stalk-mounted swit...
View full detailsTow Hitch Locking Pin (R-Clip) is the spring-steel retaining clip that secures the tow pin in an adjustable tow hitch. It pushes through the hole i...
View full detailsTowing Hitch Pin is the 25mm locking pin for the Dixon Bate 3.5 tonne ball, jaw and pin hitch (DA2123 / RTC8159), retaining the coupling jaw closed...
View full detailsTowing Bracket Slider Lock Pin is the pin that locks the vertical slider of a Dixon Bate adjustable-height towing bracket at the selected height. ...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.