for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
screw M5 x 12
Alarm Remote Transmitter, the handset used for remote operation of the vehicle's anti-theft alarm and central locking system. The unit transmits a...
View full detailsLuggage Tie-Down Hook - anchor hook in the luggage compartment for securing loads, integrated with the side trim retainer. Located in the luggage ...
View full detailsFinisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...
View full detailsFront Lamp Guard Set - protective guards that mount over the front headlamp units as part of the vehicle's exterior protection. The moulded guards...
View full detailsHook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...
View full detailsTow Hitch Locking Pin (R-Clip) is the spring-steel retaining clip that secures the tow pin in an adjustable tow hitch. It pushes through the hole i...
View full detailsTow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...
View full detailsWind Deflectors - Set of 4 - F1
Wind Deflectors - Front - F1 2DR
Detachable Tow Ball is the removable towing neck of a detachable towbar assembly. The swan-neck ball locates into a captive socket on the vehicle's...
View full detailsRear Lamp Guards fit over the rear lamps to protect the lenses from impact and debris. Supplied as a guard set.
Headlamp Guards fit over the front headlamps to protect the lenses from stone chips and impact damage. Supplied as a front guard set.
Protective Strip Kit is a set of four black protective mouldings for the body sides. The strips mount along the lower door and body panels to guar...
View full detailsTow Bar Kit - fixed swan neck towing bracket for the rear chassis mounting points. The swan neck is a one-piece curved neck and tow ball assembly ...
View full detailsTow Bar Kit - detachable swan neck towing bracket for the rear chassis mounting points. The curved swan neck carries the tow ball as a single piec...
View full detailsTow Bar Kit - fixed flange-type towing bracket for the rear chassis mounting points. The bracket bolts to the vehicle's designated rear towing att...
View full detailsRear Sports Silencer for the 1.8L 4-cylinder petrol engine, manufactured in stainless steel with a twin-pipe outlet (two 3-inch roll-top tailpipes)...
View full detailsHaynes Workshop Manual is a printed step-by-step guide to servicing, maintenance and repair, written from a hands-on strip-down and rebuild of the ...
View full detailsGet detailed guidance on servicing and repairs for your Land Rover Freelander (1997 - October 2006, R to 56 reg) with this Haynes workshop manual. ...
View full detailsAuxiliary Lamp Switch Facia-mounted switch for the auxiliary driving lamp circuit, part of the interior lighting control electrics. The switch ope...
View full detailsLamp Guard - Rear Bumper Protective guard for a rear bumper lamp, forming part of the exterior lighting protection assembly. The guard mounts over...
View full detailsFreelander lampguard set 4 pcs STC7960 BFA 3001 LG321
Front Mudflap Kit - Hatton Grey mounts behind the front wheels as part of the vehicle's exterior protection. Each flap hangs at the rear of the fr...
View full detailsRear Mudflap Kit - Hatton Grey mounts behind the rear wheels as part of the vehicle's exterior protection. Each flap hangs at the rear of the rear...
View full detailsMudflap - Pair Front mudflap pair for the lower bodywork, forming part of the underbody protection and trim. The moulded black flaps mount behind ...
View full detailsDog Guard - a rear load-area divider that separates the boot from the passenger cabin, retaining a dog or luggage behind the rear seats during tran...
View full detailsWind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsMud Flap Kit for the rear wheel arches. Reduces road spray, mud and stone throw from the rear tyres onto the lower bodywork and following traffic....
View full detailsTrailer Electrics – 13-Pin provides the 13-pin towing electrical connection, supplying power and signal from the vehicle wiring to a trailer or tow...
View full detailsTowing Bracket Slider Lock Pin is the pin that locks the vertical slider of a Dixon Bate adjustable-height towing bracket at the selected height. ...
View full detailsTow Bar Electrics with 13-pin socket for the Freelander 2 tow bar system. This wiring kit provides a 13-pin trailer electrical connection, supplyi...
View full detailsCANNY is an advanced CAN interface developed by Lazer Lamps that enables the seamless installation of auxiliary lights on modern vehicles equipped ...
View full detailsCANNY is an advanced CAN interface developed by Lazer Lamps that enables the seamless installation of auxiliary lights on selected vehicles utilizi...
View full detailsFixed Swan Neck Tow Ball Kit - a European-style fixed towing bracket with an integral swan-neck tow ball, mounting to the rear of the vehicle to pr...
View full detailsThe ultimate diagnostic tool for DIY use offering functionality previously only available in equipment many times more expensive. Standard diagnos...
View full detailsRoof Rails - a pair of longitudinal roof rails that run fore-and-aft along the roof, providing the mounting base for cross bars and roof-mounted lo...
View full detailsSpare Wheel Cover - hard-shell cover for a rear-mounted external spare wheel. Sized for a 17-inch wheel, the rigid moulded shell shields the spare...
View full detailsImprove your driving comfort with this high-quality wind deflector kit, custom-designed for the Land Rover Freelander 2. These deflectors help redu...
View full detailsTowing Hitch Pin is the 25mm locking pin for the Dixon Bate 3.5 tonne ball, jaw and pin hitch (DA2123 / RTC8159), retaining the coupling jaw closed...
View full detailsWind Deflectors - rear door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the rear door window openings, allowi...
View full detailsWind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsWind Deflectors - rear door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the rear door window openings, allowi...
View full detailsWind Deflectors - front door window wind deflector set, supplied as a pair. The deflectors fit to the tops of the front door window openings, allo...
View full detailsTowing Bracket Slider Lock Pin is the pin that locks the vertical slider of a Dixon Bate adjustable-height towing bracket at the selected height. ...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.