Land Rover Interior Parts

Courtesy Light Switch is a door-actuated contact switch in the interior lighting circuit, mounted at the door pillar aperture. When the door is op...

Interior Lamp Lens for the centre interior lamp mounted in the headlining. The lens is the translucent cover that locates over the centre courtesy...

Steering Column Switch - Wash/Wipe - the column-mounted stalk switch that operates the windscreen wiper and washer functions. Mounted on the steer...

Courtesy Lamp Switch is the door-pillar plunger switch in the interior lighting circuit. Mounted in the door aperture, it is released when a door ...

Door Lock Actuator and Switch for the central door locking (CDL) system, operating within the door latch mechanism. The actuator drives the latch ...

Interior Lamp Bulb is a 239-type festoon bulb rated 12V 5W with a C11 (SV8.5) double-ended cap, used in the interior lighting circuit. The bulb se...

Hex-head bolt, 1/4" UNF thread, 7/8" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and socket...

screw M5 x 12

Steering Ignition Lock Housing mounted on the steering column, combining the mechanical steering lock with the ignition switch mounting. It mechan...

Window Switch

Steering Ignition Lock Housing mounted on the steering column, combining the mechanical steering lock with the ignition switch mounting. It mechan...

Self-Tapping Screw – No. 8 × 5/8 in is a general-purpose fastener for securing body, trim and panel fixings. Being self-tapping, it forms its own ...

Heated Windscreen Push Switch is the facia-mounted control switch for the heated front windscreen circuit. Pressing the switch energises the heati...

Hex-head screw, 5/16" UNF thread, 1-1/4" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and so...

Interior Courtesy Lamp is the cabin roof light unit within the interior lighting circuit, providing illumination of the vehicle interior. The unit...

Steering Column Switch - Wash/Wipe - the column-mounted stalk switch that operates the windscreen wiper and washer functions. Mounted on the steer...

Heater Control Bulb illuminates the heater and ventilation control panel. Fitted into the front HVAC control assembly, it backlights the heater co...

Interior switch

Self-Tapping Screw - a No. 8 x 3/8" self-tapping screw used as a general-purpose fixing. The self-tapping thread cuts its own mating thread as it ...

Cigar Lighter - the panel-mounted lighter and 12V accessory socket in the instrument panel electrical system. The assembly comprises a socket and ...

Nut - 10/32" UNF A nut with a #10-32 UNF (Unified National Fine) internal thread, run onto a matching UNF bolt or stud to clamp the joint.

Double DIN Console - one-piece centre console fascia in black, providing the mounting aperture for a double DIN head unit in the Td5 dashboard. It...

Hex Head Bolt - 1/4" UNF thread, 5/8" long, with a hexagonal head. A general-purpose imperial fastener with a Unified Fine (UNF) thread form, driv...

USB Charging Socket - a dashboard-mounted charging socket that fits a standard factory switch aperture, giving a flush, integrated appearance in pl...

Switch Panel provides the mounting location for auxiliary switchgear in the dashboard and parcel-tray area of the fascia. Manufactured from alumin...

Interior Lamp - courtesy lamp for the passenger compartment. Provides interior illumination as part of the interior lighting circuit, typically sw...

Pan Head Screw - a machine screw with a low, rounded-top head and a flat bearing face, used as a general-purpose fixing. Metric M5 thread with a 1...

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Fuel Gauge is a 12V dash-mounted instrument that displays the amount of fuel remaining in the tank. Fitted within the instrument panel, it receive...

Front Electric Window Kit converts both front door windows from manual wind-up to electric operation. The kit includes two electric window regulat...

Heated Seat Element Assembly for the front seat squab (the backrest), part of the seat heating circuit. The heating pad sits behind the squab trim...

Bolt - M8 x 40mm standard metric hex-head fastener for use across engine, gearbox, body, and chassis assembly applications.

Cigar Lighter Mounting Plate, the fascia panel that carries the cigar lighter unit. It mounts into the dashboard fascia, locating and retaining th...

Door Speaker An original-fit speaker for the in-car audio system. It reproduces the audio output of the radio/head unit through the vehicle's spea...

Interior Lamp Lens for the interior courtesy lamp. The translucent lens clips over the lamp body, protecting the bulb and diffusing its light into...

Electric Seat Switch for the right-hand seat cushion adjustment, part of the powered seat control assembly. Mounted in the seat base side trim, it...

Rear Window Heated Switch

Ignition Switch for vehicles equipped with passive keyless entry and start. It forms part of the keyless ignition and engine-start control, initia...

Door Card - Push Button - Electric - LH is a left-hand interior door trim panel incorporating a push-button door release and electric window switch...

Radio Cassette Housing for the Defender 90/110 dashboard interior trim assembly. This moulded trim housing surrounds and retains the radio cassett...

Nutsert, M8 blind rivet nut for use where a permanent threaded insert is required and access to the reverse face of the panel or bracket is not pos...

Interior Lamp Mounting Bracket in the Defender cabin lighting assembly. This bracket mounts the interior roof lamp to the headlining or roof panel...

Asy Lamp

Fuse Box Cover - Facia is the moulded cover that closes off the facia-mounted fuse box, concealing the fuse and relay positions behind the dash. I...

CD Radio Bracket is the mounting bracket that secures the CD radio head unit within the instrument panel. It locates the audio unit in the fascia ...

Solenoid Control Switch - the push-button engine start and stop switch mounted in the centre console facia, part of the Facia and Console Switch as...

Cigar Lighter Base Assembly - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor co...