for Discounts / VAT
for Discounts & Correct VAT
This collection covers Land Rover and Range Rover interior parts across all model families, including dashboard components, switches, trim panels, headlining, and seat hardware. Fitment varies by model, trim level, and VIN, more than for any other parts category. Selection spans OEM Genuine, Allmakes, and quality aftermarket trim and accessory parts.
Front Seat Belt Assembly - Long End - left-hand inertia reel seat belt assembly forming the active (retractor) end of the front occupant restraint ...
View full detailsFront Seat Belt Assembly - right-hand inertia reel unit in the occupant restraint system. Installed at the front right-hand seating position, it p...
View full detailsSeat Belt Assembly - Front - LH - complete front left-hand seat belt assembly in Ash Grey. This active (inertia reel) assembly comprises the retra...
View full detailsSeat Belt Buckle - Right-Hand - the latching receptacle of the seat belt restraint, into which the belt tongue (latch plate) engages and locks to h...
View full detailsFront seat belt LH
Seat Belt Buckle Catch - left-hand front seat belt stalk receiver forming the fixed lower end of the front LH seat belt assembly. The non-audible c...
View full detailsSeat Belt - 3-Point Inertia Reel is a lap-and-diagonal front seat belt assembly with a self-locking inertia reel, supplied to the basic Type A spec...
View full detailsStatic Lap Seat Belt for the second-row seating position, forming part of the interior occupant restraint system. The non-retractable, fixed-lengt...
View full detailsSeat Belt Assembly - Front Right-Hand, supplied with Ash Grey webbing. This is the inertia reel (long end) of the front occupant restraint assembly...
View full detailsDecal - ZF Automatic Gearbox is an adhesive identification label associated with the ZF automatic transmission, located in the centre console and c...
View full detailsSeat Belt is the front right-hand inertia-reel seat belt assembly. It comprises the retractor, webbing and buckle tongue for the front right-hand ...
View full detailsSeat Belt Bracket provides the upper shoulder belt anchorage point in the front seat restraint system. Fitted to the left-hand side, it secures th...
View full detailsFront Seat Belt Assembly for the Defender occupant restraint system. This complete front seat belt assembly includes the belt, retractor, and buck...
View full detailsSeat Belt - Rear Centre Lap - Long End for the rear seat belt assembly in the Defender passenger compartment. This is the long webbing end of the ...
View full detailsSeat belt bracket RH
Static Three-Point Seat Belt for the front seating position, combining a lap strap and a diagonal shoulder strap in a single restraint. This is a ...
View full detailsRear Outer Seat Belt Assembly - the outer restraint serving the forward-facing second-row seat, within the rear seat belt system. This is the long...
View full detailsFront Seat Belt, Right-Hand for the front right-hand seating position. It forms part of the vehicle's occupant restraint system. The assembly is a...
View full detailsSeat Belt
Seat Belt Rear seat belt assembly. Retractable seat belt for a rear seating position.
Front Seat Belt Assembly - the left-hand front inertia-reel belt, part of the front seat belt restraint system for soft-top configurations. It is ...
View full detailsSeat Belt Fixing Kit provides the mounting hardware used to secure a seat belt assembly to the vehicle body anchorage points. The kit supplies the...
View full detailsSeatbelt Anchorage - Upper - LH for the Defender seatbelt system. This structural bracket mounts to the pillar or roof structure at the top of the...
View full detailsSeatbelt Anchorage - Upper - RH for the Defender seatbelt system. This structural bracket mounts to the pillar or roof structure at the top of the...
View full detailsSeat Belt Assembly - three-point inertia reel front seat belt for the right-hand front seat, part of the occupant restraint system. The inertia re...
View full detailsSeat Belt - Rear Centre is the rear centre seat belt assembly (short buckle end) for the forward-facing rear seating position. It provides occupan...
View full detailsSeat belt SECURICON
Front Seat Belt - Right-Hand, non-audible type, for Defender Hard Top body variants. This seat belt fits the right-hand front seating position in ...
View full detailsFront Seat Belt, Left-Hand for the front left-hand seating position. It forms part of the vehicle's occupant restraint system. The assembly is an ...
View full detailsCentre Front Seat Belt for the Defender occupant restraint system. This seat belt assembly occupies the centre front seating position and is used ...
View full detailsSeat Belt Reel Assembly - the reel-and-webbing half of a seat belt, within the seat belt restraint system. Supplied as a half belt, it comprises t...
View full detailsAir Bag
Static Lap Belt is a fixed-length, non-retracting lap belt for centre and rear load-area seating positions. It restrains the occupant across the l...
View full detailsAir bag module - a component of the supplemental restraint system (SRS). The module contains the folded air bag together with its gas generator, a...
View full detailsBuckle - Seat Belt
Buckle - Seat Belt
Dog Guard - grid-type partition separating the loading compartment from the rear passenger compartment. Installs behind the rear seat backs to kee...
View full detailsSeat Kit Belt
Security Cubby Box - steel, black. Lockable centre console storage box fitted between the front seats. Powder-coated steel construction with a loc...
View full detailsBuckle - Seat Belt
Belt
Seat Belt Assembly for the right-hand rear seating position, part of the occupant restraint system. The assembly provides the inertia-reel retract...
View full detailsSeat Belt - front occupant restraint for the right-hand seating position. Supplied with red webbing to suit the Truck Cab body and mounting to the...
View full detailsSeat Belt Assembly Front right-hand seat belt assembly. Retractable three-point seat belt for the front outer seating position.
Seat Belt - front occupant restraint for the left-hand seating position. Supplied with red webbing to suit the Truck Cab body and mounting to the ...
View full detailsSeat Belt - front occupant restraint for the right-hand seating position. Supplied with red webbing to suit the Station Wagon body and mounting to...
View full detailsSeat Belt
Seat Belt
Category Overview
Interior parts cover everything inside the cabin: dashboard assemblies and switches, instrument cluster components, headlining, door cards and door handles, seat trim and seat hardware, centre console parts, floor mats and load liners, sun visors, mirrors, and trim clips. The category spans every Land Rover and Range Rover model family currently supported, from Series and Classic Defender restoration parts through to current Range Rover L460 and New Defender L663 cabin components.
Coverage is broader than a single model collection because interior trim has a higher rate of shared part numbers across siblings (door cards, switches, and headlining components are often interchangeable across a generation), but trim levels, leather grades, and electronic switch packs vary by spec. Use the filter sidebar or the model-specific child collections linked below to narrow to your vehicle.
Pre-Purchase ChecklistInterior parts have the tightest fitment dependencies of any category on this site. Confirm each of the following before placing an order:
For vehicles still in mainstream production support (Discovery 5, Range Rover Sport L461, and current Defender L663), OEM Genuine remains the primary source for dashboard, switch, and electronic trim components. For classic models out of production for more than 10 years, Land Rover Classic Parts remains the official genuine source, with quality aftermarket parts (Bearmach, Britpart, Allmakes) covering the bulk of restoration interior demand.
Interior parts also sit adjacent to several other systems on the catalogue. Switch packs and instrument cluster components overlap with Land Rover electrical parts where the unit is electronic rather than purely mechanical. Door cards and headlining attachment points overlap with chassis and body parts where structural panels meet trim. Trim clips and retaining hardware overlap with hardware and fasteners when an interior repair needs replacement fixings. A single restoration job often draws from two or three of these categories together.
For model-specific interior parts, narrow to the relevant child collection: Classic Defender parts, Discovery 2 parts, Range Rover Classic parts, or Range Rover P38 parts. Each child collection filters to its model and supports a finer search across the interior catalogue.
The full Land Rover and Range Rover parts catalogue covers related cabin and trim-adjacent areas. The categories below sit next to interior parts in buyer search intent and often complete a single restoration or repair job.
External body panels, bulkhead and crossmember repair sections, structural chassis parts.
Land Rover chassis and body partsAdd-on convenience items, dog guards, roof racks, towing accessories, boot liners.
Land Rover accessoriesInterior dome lights, switch-integrated lighting, headlining-mounted fittings.
Land Rover lightingTrim clips, basic fasteners, and some switch packs interchange across siblings within a generation. Dashboards, instrument clusters, door cards, headlining, and seat hardware are model-specific and often trim-level-specific. As a general rule, anything visible inside the cabin should be confirmed by part number against the vehicle's VIN before ordering. Carryover from a sibling model is the exception, not the rule.
The VIN and the option-pack code on the build plate are the two reliable references. For vehicles built from approximately 1997 onwards, the 17-digit ISO 3779 VIN format provides model year and platform encoding. For earlier vehicles (Classic Defender Tdi-era, Discovery 1 pre-1997, Range Rover Classic), the standard digit-position rules do not fully apply and the build plate or Land Rover Heritage records are the better source.
Some platform-shared components carry over between Land Rover and Range Rover models built on the same architecture. For example, the IBF platform shared by Discovery 3 (L319) and Range Rover Sport L320 sees some common interior fittings, and the D7u platform shared by Range Rover L405, Range Rover Sport L494, and Discovery 5 L462 shares more again. Most cabin-facing trim does not interchange across model lines, however, because dashboard surfaces, switch finishes, and seat hardware are spec'd separately.
Wear and failure patterns are model-specific. Headlining sag is common on Discovery 2 and Range Rover P38 cabins as the original foam adhesive breaks down with age and heat cycling. Leather seat bolster cracking affects Range Rover Classic and early L322 driver's seats more than other panels because of the entry and exit wear pattern. Dashboard surface delamination and sticky-touch coating breakdown is a known issue on Range Rover P38 and early L322 dashboards. Switch pack failure (window switches, mirror switches, seat memory switches) is concentrated on Range Rover L322 and Discovery 3 builds where the same supplier hardware was used across the generation. When sourcing replacement parts, the wear pattern usually points to which trim level and which build-year sub-variant the vehicle started life as.
Most model generations carry at least one mid-cycle interior trim split, and several carry more than one. The Range Rover L322 (2002 to 2012) had a major refresh around 2006 that changed dashboard surfaces and switch packs. The Range Rover P38 (1994 to 2001) split its interior parts catalogue mid-production around 1999. Discovery 2 had a 2003 facelift that changed cabin trim. The current L460 Range Rover (2022 onwards) has already seen PHEV variant changes that affect rear-cabin layout. When ordering interior parts, treat the model designation as a starting point rather than a complete fitment identifier and verify the build year against the canonical parts catalogue for that generation.
Updated: May 2026