Land Rover Interior Parts

The Seat Spring Rear Outrigger is a key component designed for the Defender 110/130 models. This high-quality rear seat spring outrigger supports t...

Heater Control Label - replacement decal for the heater control panel. Fits within the HVAC control assembly and provides the printed markings ind...

Rear Door Finisher for the internal rear door release assembly. This trim panel finisher fits around the interior door release mechanism on the re...

Trim Clip - push-fit fastener securing exterior body mouldings, front and rear bumper trim and the radiator grille to the body panels. Renews an o...

Rear Side Window Storage Panels for the load space, supplied as a left- and right-hand pair. The panels fit against the rear side window area of t...

Radio Surround Panel is the lower fascia surround that frames the audio head unit aperture in the centre console of the Range Rover P38. It sits w...

Radio Cassette Housing for the Defender 90/110 dashboard interior trim assembly. This moulded trim housing surrounds and retains the radio cassett...

Rear Trim Panels Without Windows - moulded interior side trim panels for the rear compartment, supplied as a matched left and right pair. The pane...

Load Space Mat - ribbed rubber liner for the rear load area floor, cut to the shape of the load space and laid directly over the floor panel. Supp...

Front Floor Mats - moulded rubber mats supplied as a pair for the driver and passenger footwells. The mats are shaped to the contours of the footw...

Seat Belt

Chubby Cubby Box - a between-seats storage box and armrest that mounts on the centre panel of the seat box. It provides lockable interior storage ...

Front Floor Mat Set shaped to fit the front footwells. The mats are cut to match the floor and transmission tunnel of 2.4 TDCi (Puma) models in le...

Rubber Mat Set Front R Rover 1994

Front Floor Mat Set shaped to fit the front footwells. The mats are cut to match the floor and transmission tunnel of 2.2 TDCi (Puma) models in le...

Carpet Set - front cab area, for 2.4L Puma TDCi models in right-hand drive configuration. The set covers the bulkhead, gearbox tunnel, under-dash ...

Waterproof Seat Cover Set for the front seats, supplied as a pair. Tailored to fit over the standard front seats and protect the original upholste...

Seat Belt Rear seat belt assembly. Retractable seat belt for a rear seating position.

Door Card - Push Button - Electric - RH is the interior trim panel for the right-hand front door. It covers the inner door frame to provide the fi...

Upper Steering Column Shroud is the moulded cover fitted over the top section of the steering column. It encloses the upper column and the mountin...

Centre Cubby Box finished in grey, fitting the centre position between the front seats to provide an enclosed storage compartment with a moulded do...

Heated Sport Seats (Pair) - a matched pair of front bucket-style sports seats for the cab, finished in black with a diamond-pattern facing and a lo...

Front Seat Belt Assembly - the left-hand front inertia-reel belt, part of the front seat belt restraint system for soft-top configurations. It is ...

Seat Base Cushion - Front for the front seat assembly. This cushion forms the lower seating surface and mounts onto the front seat frame, supporti...

Rear Parcel Shelf Bracket for the Range Rover Classic, providing the mounting point that locates and secures the parcel shelf assembly within the r...

Fastener used to secure interior door casing panels and body side trim. Retains door casing and rear body panel trim on applicable vehicles.

Nutsert, M8 blind rivet nut for use where a permanent threaded insert is required and access to the reverse face of the panel or bracket is not pos...

Door Trim - Rear Casing - Slate Grey for the Defender rear end door interior. This rear door casing panel fits the interior face of the Defender r...

Screw - 2BA x 1" is a round head screw in British Association (BA) thread form, 2BA size, 1 inch in length. Used throughout the Series Land Rover ...

Spring Clip for the rear end door trim casing, part of the interior trim fixings. The sprung clip retains the rear door card (trim casing) to the ...

Loadspace Mat is a fitted rubber mat for the rear loadspace floor. It protects the loadspace floor surface from wear, dirt and moisture and provid...

Seat Frame for the adjustable driver's seat on Series II and Series III models. This structural frame forms the base of the driver's seat assembly.

Seat Adjuster Handwheel Cap - the trim cap fitted over the manual recline hand wheel on the front seat. It covers the centre of the rotary recline...

Front Door Card is the interior trim panel that covers the inner structure of the front door, concealing the window regulator, latch linkage and wi...

Self-Tapping Screw - a No. 14 x 3/4" black button-head self-tapping drive screw used across body and interior trim. It secures the front grille to...

Seat Cushion Cover - Base in Techno-pattern velour fabric, for the squab section of the front seat on Defender 90, 110, and 130 models. The Techno...

Rear Inward-Facing Seat in black trim. This individual inward-facing seat mounts in the load area to provide additional occasional seating. Inward...

Fresh Air Grille Finisher for the fresh air intake, left-hand side. This capping finisher trims the fresh air intake grille on the body, covering ...

Seat Belt Fixing Kit provides the mounting hardware used to secure a seat belt assembly to the vehicle body anchorage points. The kit supplies the...

Flanged Clip Nut is an M6 captive nut retained in a spring-steel clip. The clip pushes onto a panel edge or into a mounting hole to hold the nut c...

Bolt - M8 x 40mm for the front seat rail mounting. This bolt secures the front seat rails to the floor pan. M8 thread, 40mm length. Sold as a sing...

Retainer for the carpet and seat base assembly in the Land Rover Defender. This retainer secures the floor carpet or seat base trim panel within t...

Seat Recline Mechanism Cover - LH is the trim cover plate fitted over the front seat recline adjuster mechanism. It conceals and protects the recl...

Seat Recline Mechanism Cover - RH is the trim cover plate fitted over the front seat recline adjuster mechanism. It conceals and protects the recl...

U-Type Spring Nut for the fascia (dashboard) assembly and mounting brackets. Spring-steel clip-on nut that grips a panel edge to provide a captive...

Floor Mat Set — moulded rubber floor mats for the front footwells, protecting the cabin floor and carpet. The tailored rubber mats sit in the driv...

Pan Head Bolt, M8 x 40mm. Metric pan head bolt for use across Land Rover body, chassis, and interior assemblies.