for Discounts / VAT
for Discounts & Correct VAT
Land Rover steering components carry the driver's input from the steering wheel to the front wheels, controlling direction through the steering box or rack, track rods, drag links and the hydraulic or electric assistance parts that work with them. Left-hand-drive and right-hand-drive vehicles may use different steering boxes, racks, columns, drop arms and pipework, so confirm your vehicle's drive side alongside the model before ordering. This collection spans genuine, OEM and aftermarket options, from a simple track rod clamp to a complete steering rack or steering box.
Power Steering Belt - polyvee (multi-rib) drive belt that drives the power-assisted steering pump. Runs in the auxiliary drive, transferring rotat...
View full detailsPower Steering Suction Hose for the power steering hydraulic circuit. This low-pressure hose carries fluid from the reservoir to the inlet of the p...
View full detailsDrop Arm Nut secures the steering drop arm onto the splined output (sector) shaft of the steering box. This is the nyloc retaining nut for the dro...
View full detailsSteering Guard - 8mm Alloy - LHD - Black for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate wit...
View full detailsRod LHD
Power Steering Hose - Steering Box to Reservoir - Left-Hand Drive for the Range Rover Classic and Discovery 1 hydraulic steering circuit. This hos...
View full detailsTrack Rod End Assembly for the steering linkage, connecting the track rod to the steering drop arm and transmitting movement from the steering box ...
View full detailsSteering Box Assembly - LHD is the power-assisted recirculating-ball steering box, in the left-hand-drive configuration. It is the central unit of...
View full detailsSteering Shaft Assembly forming the intermediate link between the steering column and the steering box. The shaft transmits rotation from the stee...
View full detailsPower steering pump
Power Steering Pump Seal Kit – Cast provides the seals needed to overhaul the cast-bodied power steering pump within the steering hydraulic circuit...
View full detailsLongitudinal Steering Tube for the Series III steering linkage assembly, applicable from axle number suffix E onwards. This tube connects the stee...
View full detailsLower Steering Shaft Universal Joint for the steering column assembly, forming the lower coupling between the steering column and the steering box ...
View full detailsTrack Rod Tube is the central bar of the steering track rod within the front steering linkage. Its threaded ends accept the track rod ends, joinin...
View full detailsDrop Arm for the Gemmer recirculating-ball steering box, forming the output lever of the steering linkage. The drop arm mounts on the splined sect...
View full detailsPower Steering Pump generates the hydraulic pressure that drives the power steering system. Engine-driven, it draws fluid from the reservoir and d...
View full detailsSteering Column Lock - the steering column lock and ignition switch assembly. Mounted on the steering column, it mechanically locks the column whe...
View full detailsPAS pump assy Disco 2 TD5
Steering Box Seal Kit reseals the input shaft of the 4-bolt power steering box within the power-assisted steering circuit. The input shaft is wher...
View full detailsPower Steering Hose forms part of the power steering hydraulic circuit, carrying pressurised fluid between the pump and the steering box. Configur...
View full detailsPower Steering Filter for the power-assisted steering (PAS) fluid reservoir, part of the Steering Hydraulic Circuit. This filter element sits insi...
View full detailsShear Bolt for the steering column lock housing. This tamper-resistant security fixing clamps the steering column lock and ignition switch housing ...
View full detailsTrack Rod Clamp Kit secures the track rod within the steering linkage assembly, holding the joint in position so the steering geometry stays set. ...
View full detailsTrack Rod Tube for the front steering linkage of the Discovery 1 and Range Rover Classic. The track rod tube forms the central threaded section of...
View full detailsSteering Guard - 8mm Alloy - LHD for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate with a tape...
View full detailsSteering damper Discovery 2
Drop arm LHD RRcl, D1 92>
Lower Steering Column Shroud is the lower half of the trim cover that encloses the steering column below the steering wheel. The moulded shroud co...
View full detailsPower Steering Hose forms the low-pressure feed line of the power steering hydraulic circuit, carrying fluid from the reservoir to the inlet of the...
View full detailsSteering Damper mounts in the front steering linkage to absorb kickback and reduce shimmy transmitted from the front axle to the steering wheel. T...
View full detailsSteering Box Bearing - Manual is a needle bearing fitted inside the manual (non-power-assisted) Gemmer steering box. The bearing supports the sect...
View full detailsPower Steering Pump - the engine-driven pump at the heart of the power steering hydraulic circuit. Belt-driven from the engine, it draws fluid fro...
View full detailsPower Steering Hose - the high-pressure feed line in the power steering hydraulic circuit. It carries pressurised fluid from the power steering pu...
View full detailsSteering Box - LHD is the manual steering gearbox at the heart of the steering system. It converts rotation of the steering wheel and column into ...
View full detailsSteering lock
Steering Damper - hydraulic steering damper supplied with its mounting bushes. Fitted across the steering linkage, it damps shocks and vibration f...
View full detailsPower Steering Pump - Hobourn-type hydraulic pump serving the power-assisted steering circuit on V8 engines. It is driven from the crankshaft by a ...
View full detailsDrop Arm Nut for the Gemmer 6-bolt steering box on the Defender 90/110 and Range Rover Classic. This hex nut secures the steering drop arm to the ...
View full detailsSteering Arms (Drag Link) form the steering linkage that transmits movement from the steering box to the swivel housings. Manufactured in heavy-du...
View full detailsTrack Rod Assembly - the front steering link that connects the steering arms on the two front swivel housings across the front axle. It holds the ...
View full detailsTrack Rod End (Right-Hand) is the ball-joint connector at the end of the steering track rod, linking the track rod to the steering arm. It transmi...
View full detailsDrop Arm for the steering linkage, fitted to the Gemmer steering box output shaft. The splined eye at the upper end clamps onto the box sector sha...
View full detailsPower Assisted Steering Hose for the 4-cylinder non-Tdi engine, part of the hydraulic steering circuit on right-hand drive Defender 90 and 110 mode...
View full detailsDrag Link Tube The central tube of the drag link in the steering linkage. The drag link transmits steering movement from the steering box drop arm...
View full detailsUpgrade your Land Rover's steering system with Heavy-Duty Steering Arms, designed for superior strength and performance, especially in off-road con...
View full detailsPower Steering Hose routed between the steering box and the power steering pump. It forms part of the power steering hydraulic circuit, carrying fl...
View full detailsPAS pipe box to reservoir
Power Steering Pipe - the return line in the power steering hydraulic circuit. It carries low-pressure fluid from the steering box back to the pow...
View full detailsSuspension arm and axle bushes have their own home in Bushes and Rubbers, so this page stays focused on the parts that steer. Budget Parts has supplied Land Rover parts for more than 25 years, with stock held across our Dutch warehouse network for fast EU dispatch.
The steering system carries the driver's input from the wheel to the front tyres, and feeds every bump and road camber back through the same path. On beam-axle Land Rover models that means a steering box, drop arm, drag link and track rod; on rack-and-pinion models it is a steering rack, track rod ends and, where power-assisted, a pump, hose and reservoir. Worn components show up as play or vagueness at the wheel, wander or pulling under braking, a clonk over bumps, or fluid leaks from a pump or hose. Because steering works within the wider Land Rover axle, suspension and steering system, it is worth checking the ball joints and bushes at the same time.
This page brings together the steering range for Series, Defender, Discovery, Freelander and Range Rover models. Left-hand-drive and right-hand-drive variants use different steering boxes, racks, columns and drop arms across most of this range, so confirm your build before ordering. Suspension arm and axle bushes are covered separately in Bushes and Rubbers, and standalone suspension ball joints sit in Ball Joints.
Buying GuideBefore anything else, confirm left-hand-drive or right-hand-drive. Steering boxes, racks, columns, drop arms and some pipework are handed, so the same model and engine can need two different part numbers depending on drive side. Check this alongside the model and build date rather than assuming it from the vehicle's market.
A worn steering box or rack does not always need full replacement. Seal and repair kits can renew leaking seals, boots and gaiters and other small serviceable components, but they will not correct worn gears, bearings, a pitted shaft or a damaged housing, so they suit a unit that is otherwise sound. Where the housing is worn, pitted or the fluid shows metal contamination, fit a complete steering box, steering gear or steering rack instead. The same logic applies to steering dampers: some are supplied with their bush included, others need the bush ordered separately, so check the listing before you buy.
Genuine, OEM and aftermarket. Genuine steering boxes, racks and columns carry the Land Rover part number and sit at the top of the price range, particularly on later electric power-assisted racks. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Bosch and Meyle may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers reconditioned exchange units and value brands for wear items such as track rod ends, drag links and steering linkage hardware. For a standard repair, an OEM or OES part is usually the sensible balance of cost and quality; save genuine for warranty-sensitive or late-model vehicles where an exact match matters.
FitmentThe table below groups models by steering type so you can see which parts apply. Confirm the exact box, rack or column by VIN or build, since drive side and power-assistance type both change the part number.
| Model group | Steering type | Drive side | Notes |
|---|---|---|---|
| Series 1, 2, 2A, 3 | Steering box (worm and nut on Series 1, recirculating ball on Series II, IIA and III), drag link and track rod | LHD and RHD produced | No factory power steering; aftermarket conversions common |
| Defender (to 2016) | Steering box (recirculating ball), drag link and track rod, power-assisted on later models | LHD and RHD | Steering box and drop arm are handed |
| Defender (L663) | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Discovery 1 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Discovery 2 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Discovery 3 and 4 | Rack and pinion, power-assisted | LHD and RHD | Rack and column are handed |
| Discovery 5 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Discovery Sport | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Range Rover Classic | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Range Rover P38 | Steering box (recirculating ball), drag link and track rod, power-assisted | LHD and RHD | Steering box is handed |
| Range Rover L322 | Rack and pinion, power-assisted | LHD and RHD | First Range Rover on rack and pinion steering |
| Range Rover L405, L460 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| RR Sport L320 | Rack and pinion, hydraulic power-assisted | LHD and RHD | Shares Discovery 3/4 hydraulic system |
| RR Sport L494, L461 | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Freelander 1 and 2 | Rack and pinion, power-assisted | LHD and RHD | Confirm by VIN |
| Range Rover Evoque | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
| Range Rover Velar | Electric power-assisted rack and pinion | LHD and RHD | Confirm by VIN |
Match the part to your specific vehicle before ordering, starting with drive side. Left-hand-drive and right-hand-drive Land Rovers may use different steering boxes, racks, columns, drop arms, pipework and mounting hardware, so confirm this before the model or engine. Work from the build date and VIN rather than the model year alone, because steering specification can change mid-production and between markets. The VIN plate is on the chassis or under the bonnet depending on model; a VIN or chassis-number search returns the exact steering build. On power-assisted systems, also confirm whether your vehicle uses hydraulic or electric assistance, since the pump, hose and reservoir parts differ between the two.
FittingSteering components are safety-critical parts that directly control the vehicle. Fit new locking nuts and split pins where specified, torque all fixings to the correct figure, and confirm left-hand-drive or right-hand-drive before ordering. Book a wheel alignment after replacing any part that sets toe.
How heat, dust and sustained pace attack cooling, brakes and suspension on a hard-driven Defender, with upgrade priorities.
Defender suspension under rally loadDesert-rally preparation for the Defender 90 covering suspension, cooling, air intake and the spares worth carrying.
Defender 90 desert suspension setupControl arms, radius arms, trailing links and wishbones for front and rear axles.
Land Rover suspension arms and control armsDampers, struts and off-road coilovers with fitting hardware.
Land Rover shock absorbers and dampersRoad springs, lift springs, spring seats and related spring hardware.
Land Rover coil springs and kitsSwivel kits, stub axles, half shafts and drive flanges.
Land Rover axle and swivel partsHub bearings, wheel hubs, oil seals and taper roller bearings.
Land Rover wheel bearings and sealsCheck the vehicle itself rather than assuming from the model or market, since privately imported and converted vehicles exist on both sides. Steering boxes, racks, columns and drop arms are handed parts, so ordering the wrong side means it will not bolt up. Confirm drive side alongside the model, engine and build date before ordering.
Genuine steering boxes, racks and columns carry the Land Rover part number and sit at the top of the price range, particularly on later electric power-assisted racks. OEM or OES parts come from original-equipment manufacturers or recognised OE suppliers, and brands such as Lemforder, Delphi, Bosch and Meyle may appear as OE, OES or aftermarket depending on the specific item. Aftermarket also covers reconditioned exchange units and value brands for wear items such as track rod ends, drag links and steering linkage hardware.
It depends on condition, not just age. A repair or seal kit can renew leaking seals, boots and gaiters and other small serviceable components, but it will not correct worn gears, bearings, a pitted shaft or a damaged housing, so it suits a unit that is otherwise sound. Where the housing is worn, pitted, or the fluid shows metal contamination, fit a complete steering box, steering gear or steering rack instead.
A steering damper controls kickback and oscillation at the front wheels, smoothing out the shock from ruts, potholes and rough tracks before it reaches the steering wheel. Some listings include the mounting bush, others supply the damper alone, so check the listing before ordering, especially if the existing bush is perished or cracked.
The track rod connects the two front wheels together and sets the toe angle, with a track rod end (a ball joint) at each side. The drag link, found on beam-axle steering-box vehicles, connects the steering box drop arm to the steering arm on the axle and transmits the driver's steering input. Both wear at their ball joints and both are checked for play in the same way.
Yes, for any part that sets or affects toe, including track rod ends, drag links, steering racks and steering arms. Book a four-wheel alignment after fitting to protect tyre life and keep the steering true. Parts that do not set toe, such as a power steering pump or hose, do not need a follow-up alignment.
Technical content by the Budget Parts workshop team.
Updated: July 2026