Land Rover Suspension Bushes & Anti-Roll Bar Kits

Radius Arm Bush Set - Front - Polyurethane is a set of four polyurethane bushes for the front radius arm-to-chassis mountings. The radius arms loc...

Pedal Pivot Bush is the bearing bush on which the clutch or brake pedal pivots within the pedal box assembly. Pressed into the pedal bore, it prov...

Fan Cowl Flexible Mounting - a rubber mounting for the engine cooling fan cowl. It secures the fan cowl to the radiator, locating the cowl around ...

Engine Bush Kit - Diesel

Rubber Buffer for the door-top sliding side window. The buffer fits at the top of the door and acts as an end-stop for the sliding glass, limiting...

Anti-Roll Bar is the rear stabiliser bar within the suspension system, mounted transversely across the rear axle. Connected to the suspension thro...

Radius Arm Bush mounts the front radius arm to the axle within the suspension linkage, at the axle end of the arm. The bush provides a flexible pi...

Radius Arm Bush Kit - Chassis End, Front (Terrafirma). A set of four uprated polyurethane bushes for the front radius arm mountings, replacing the...

Shock Absorber Bush Kit for the mounting points of Terrafirma TS-series shock absorbers. The kit provides the hardware required to replace worn bu...

Radius Arm Bush - Front - mounts the front radius arm at its axle end within the front suspension. The radius arm locates the front axle longitudi...

Radius Arm Bush Set - Polyurethane fits at the axle end of the front radius arms, within the front suspension radius arm and axle location assembly...

Upper Link Bush Set - Polyurethane for the rear suspension, fitted within the top link, fulcrum and ball joint assembly. Supplied as a set of two ...

Polyurethane Suspension Bush Kit A complete polyurethane bush set that replaces the original rubber suspension bushes across the chassis-mounted su...

Bump Stop for the suspension, mounted at the limit of axle travel. This rubber stop caps upward suspension movement at full compression, providing...

Rocker Shaft Bush in the cylinder head valvetrain. The bush is pressed into a rocker pedestal and provides the bearing surface that supports the r...

Polyurethane Boot - Defender - Discovery 1/2 - RRC - P38

Clutch Pedal Spring Bush is a small bush fitted to the clutch pedal assembly on the Defender 90/110, locating the pedal return spring. The bush se...

Brake Pedal Pivot Bush for the brake pedal assembly. It seats in the pedal box and forms the bearing surface on which the brake pedal pivots on it...

Buffer Rubber for the rear end door check mechanism. The buffer forms the end-stop in the lever-type rear door check strap assembly. It absorbs co...

Polyurethane Bush Kit for the steering damper mountings, replacing the original rubber bushes that locate the damper at its fixing points. Moulded...

Ball Joint for the anti-roll bar drop link. It forms the pivoting connection at the end of the anti-roll bar, linking the bar to the suspension so ...

Bush Kit - Front Radius Axle Arm End

Anti-Roll Bar Spacer Kit - 2-Hole for Land Rover Defender. These spacers are used to correct the anti-roll bar drop link geometry on lifted Defend...

Anti-Roll Bar Spacer Kit for the anti-roll bar mounting assembly on the Defender. Designed for use with 4-hole mounting brackets, these spacers en...

Suspension Bush Set - Black is a complete polyurethane bush kit for the Defender Puma suspension system, covering front and rear axle linkages and ...

Suspension Link Bush is the rear upper A-frame bush, fitted at the chassis-side mounting of the A-frame that locates the rear axle. It cushions an...

Radius Arm to Chassis Bush - Front locates the front radius arm to its chassis mounting bracket within the coil-sprung front axle suspension. It f...

Panhard Rod Bush from the front suspension's lateral location linkage. The Panhard rod controls sideways movement of the axle relative to the body...

Rear Radius Arm Bush Kit - Chassis End, supplied as a set of four polyurethane bushes with retaining plates, inner sleeves, and installation grease...

Polyurethane Bush for the rear suspension upper link, part of the rear A-frame top link and fulcrum arrangement. The bush locates the upper link a...

Radius Arm Bush mounts at the axle end of the front radius arm, within the front suspension radius arm and axle location assembly. It forms the co...

Panhard Rod Bush for the front suspension lateral location assembly. This rubber bush is pressed into the Panhard rod eye and provides the complia...

Anti-Roll Bar Bush for the front suspension system, sold as a pair. This bush locates the anti-roll bar at its chassis mounting points, allowing t...

Anti-Roll Bar Bush in polyurethane, 28mm bore, for the rear anti-roll bar mounting. The bush sits where the bar is clamped to its chassis brackets...

Suspension Bush - Rear Lower, polyurethane, supplied as a set of two bushes with internal sleeves and installation grease for the axle-end mounting...

Anti-Roll Bar Kit comprising both front and rear anti-roll bars for the suspension system, supplied complete with standard rubber bushes and fittin...

Anti-Roll Bar for the rear suspension, 28mm bar diameter. The bar mounts to the chassis on a pair of clamped bushes and connects to the axle throu...

Spherical Bush for the LT77 and R380 manual gearbox gearchange mechanism. It seats the spherical pivot at the base of the gear lever inside the re...

Anti-Roll Bar Strap Bracket for the front suspension assembly. Provides the mounting point for the anti-roll bar strap on the axle casing. The bra...

Rear Bush Kit for the trailing arm and A-frame rear suspension assembly. This kit provides the rubber bushes for the chassis mounting points of th...

Front Bush Kit, a set of replacement bushes for the front suspension of the Land Rover Defender. The bushes insulate the front suspension mounting ...

Anti-Roll Bar Link & Shock Bush Kit renews the compliant mounting bushes in the anti-roll bar link and shock absorber mounting points within th...

Suspension Bush Set - Black is a complete polyurethane bush kit for the Defender 90/110 suspension system, covering front and rear axle linkages an...

ABS Sensor Bush is a retaining bush used to locate the wheel speed sensor within its mounting point in the hub or axle assembly. The bush provides...

Stub Axle Bush Front - 90/110

Suspension Bush Kit is a complete set of polyurethane suspension bushes covering the front and rear radius arm mountings and the Panhard rod, suppl...