Range Rover L322 Parts

Clip is a locking retaining clip in the front windscreen wiper linkage. It locks the wiper linkage connection, securing the motor and linkage asse...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Transmission Sleeve for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It is fitted within the main control valve body, where it forms th...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Flanged Nyloc Nut, M10, a multi-purpose locking fastener used across the chassis and suspension. The nylon insert resists loosening under vibratio...

O-Ring for the engine coolant water manifold, sealing the manifold joint in the cooling circuit of the 4.4L M62 V8 petrol engine. Measuring 34.2mm...

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Oil Pump Oil Seal for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It seals the oil pump hub at the front of the transmission, where t...

Intercooler Hose - Upper, Right-Hand for the charge-air (boost) circuit of the 3.6L V8 32V DOHC diesel engine. This is the upper hose on the right...

Thermostat Housing Seal for the engine cooling system, sealing the thermostat housing joint. Fitted between the thermostat housing and its mating ...

Flanged Nut - an M14 x 1.5 nut with an integral flange, used to secure suspension fasteners. The flange spreads clamp load across the joint face a...

Coolant Expansion Tank Cap rated at 1.4 bar, fitted to the expansion (header) tank of the engine cooling system. The cap seals the expansion tank ...

Handbrake Shoe Set for the mechanical parking brake, which operates inside its own dedicated drum and is independent of the hydraulic service brake...

Exhaust Gasket sealing a flanged joint in the exhaust system on Land Rover and Range Rover models fitted with the 2.7L TDV6, 3.0D V6, 2.2D, and 4.4...

Intercooler Hose - left-hand upper hose in the charge air (intercooler) circuit of the 3.6L V8 32V DOHC turbo diesel (Lion TDV8). It carries press...

Camshaft Cover Bush for the 4.4L M62 B44 V8 petrol engine, fitted at the camshaft cover fixing points on the cylinder head cover. Each bush seats ...

Belt Tensioner for the auxiliary (accessory) drive belt system. The spring-loaded tensioner arm and pulley maintain the correct tension on the ser...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Circlip for the lower steering knuckle bush. This circlip retains the bush within the lower steering knuckle, forming part of the front axle and s...

Water Pump Gasket seals the coolant pump (water pump) to its mounting face within the engine cooling circuit. The gasket forms a leak-tight joint ...

Gasket - Oil Tube

Ball Joint - Front Suspension Arm is fitted at the outer end of the upper front suspension arm, forming the pivot between the arm and the steering ...

Expansion Tank Cap

Exhaust Manifold Stud for TDV6 2.7 and 3.0 and TDV8 3.6 diesel engines, used to fasten the exhaust manifold to the cylinder head. On 2.7 TDV6 engi...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Fuel Injector Sealing Washer for diesel injector installations. The washer seals the fuel injector against its seat in the cylinder head, containi...

Leak-Off Tube - Injection Pump

Transmission Oil Pan - fluid pan for the ZF 6HP26 / 6HP28 six-speed automatic transmission, forming the base of the transmission casing and holding...

Exhaust Clamp - 60mm exhaust joint clamp for the front section of the exhaust system, securing the downpipe to the centre silencer section. Clamps...

Exhaust Gas Temperature Sensor measures exhaust gas temperature at the front of the diesel particulate filter, in the upstream section of the after...

Front Fog Lamp - Left-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplementa...

Front Fog Lamp - Right-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplement...

Water Outlet Connection - lower coolant outlet housing in the engine cooling circuit of the 4.4L TDV8 diesel engine. It bolts to the engine and di...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

Cable Connector is a four-way electrical connector body used in the vehicle wiring harnesses. It joins a harness branch to its mating half, retain...

Stop Light Switch mounts on the brake pedal bracket and controls the stop lamp circuit. When the pedal is depressed the switch closes its contacts...

Brake Calliper - Rear - RH is the right-hand rear brake calliper within the rear braking assembly. It clamps the brake pads against the brake disc...

Brake Caliper - Rear - RH is the right-hand rear caliper of the disc brake assembly. Under hydraulic pressure from the rear brake circuit, it clam...

Rear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...

Fuel Filter Element - the replaceable filtration element in the diesel fuel supply circuit. Fitted to the 3.6L V8 TDV8 (Lion) diesel engine, the e...

Heater Hose for the Range Rover L322 heating circuit, fitted to the M62 B44 4.4L V8 Petrol engine. The heater hose carries hot engine coolant from...

Exhaust Manifold Gasket - Right for the exhaust manifold assembly on AJ-V8 4.4L Petrol and 4.2L Supercharged petrol engines. This gasket seals the...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head within the exhaust assembly. It maintains a gas-tight s...

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Metering Valve for the fuel injection system of the 4.4L V8 TDV8 diesel engine. Mounted on the high-pressure fuel pump assembly, the metering valv...

Inlet Manifold Sensor for the 4.4L V8 TDV8 Diesel engine management system. This sensor monitors pressure and temperature within the intake manifo...

O-Ring, 76.5mm, used in the engine cooling circuit to seal the coolant pump (water pump) and thermostat housing joints. The O-ring maintains a lea...

Plain Washer