Range Rover Parts

Contact Set for the ignition distributor of the 3.5L V8 petrol engine. The contact breaker points open and close the primary circuit to the ignitio...

Upper Hinge Bolt secures the upper hinge leaf to the door pillar in the door hinge assembly. On Defender, this bolt attaches the upper rear end do...

Differential Pinion Bearing Shim - 0.064 in, for use in the Rover 10-spline rear differential. This shim sets the preload on the pinion outer beari...

Sealing Washer seals the turbocharger oil drain pipe where it meets its adaptor on the engine block. It forms an oil-tight joint in the turbocharg...

Engine Piston for the 2.5L 300 TDi diesel engine, supplied in standard bore size. The piston runs in the cylinder bore and transfers combustion pr...

Bolt - 1/4" UNC x 1-7/8" is a UNC hex head bolt used in the engine cooling and air conditioning systems of Land Rover vehicles fitted with the 3.5L...

Self Tapping Screw for use in Land Rover body, chassis, and hardware applications.

Front Brake Caliper Piston is a 41mm piston that operates in the front brake caliper, part of the braking hydraulic circuit for solid disc brakes. ...

Rocker Cover Screw - Long for the Rover 3.5L V8 engine. This long 1/4" UNC x 1-5/16" screw secures the rocker cover to the cylinder head on the Ro...

Cam Follower - a roller-type tappet operating in the engine valve train, between the camshaft and the pushrod. It rides on the camshaft lobe and t...

Rear Coil Spring - Heavy Duty, +2" Lift A rear suspension coil spring from the Terrafirma range, seating between the axle and the chassis spring s...

Kit gasket carb for Rover V8 engines fitted with SU carburetors

Shakeproof Starlock Washer used within the clutch master cylinder and pipe assembly. The washer pushes onto a plain shaft or pin and grips it with...

Front Spring Spacers fit between the front axle and the base of the front coil spring to raise the spring mounting point. The spacers are 50mm (2 ...

Twin Shock Mount Kit - Rear provides the additional mounting points required to run twin rear shock absorbers on each side of the rear axle. The ad...

Suspension Kit providing 2 inches of lift in a heavy load configuration, combining rated coil springs with All Terrain shock absorbers. The heavy ...

Terrafirma All Terrain Suspension Kit - Light Load, +2" (50mm) Lift for Defender 90, Discovery 1 and Range Rover Classic. This is a RAISED suspens...

Shock Absorber - rear suspension damper with four-stage adjustable damping, for standard ride-height travel. Fitted between the chassis and rear a...

Shock Absorber - front suspension damper with four-stage adjustable damping, for standard ride-height travel. Fitted between the chassis and front...

Big Bore Expedition Shock Absorber - front position, standard ride height. The damper installs between the front axle mounting and the chassis bra...

Rear Coil Springs - Medium Load, +2" Lift (Terrafirma), supplied as a pair. This is a LIFT spring: it raises the rear by approximately 2" (50mm) o...

Coil Springs are a matched front pair that raise ride height by 2 inches (50 mm) above standard, forming part of the coil-sprung front suspension. ...

Power Steering Box of the Adwest lightweight type, right-hand drive, supplied complete with the drop arm. The steering box is the mechanical heart...

Handbrake Adjuster for the rod-operated transmission parking brake mounted on the LT230 transfer box. On these vehicles the handbrake acts on a dru...

Fusible Link - 30A Pink for the electrical protection circuit. A fusible link that installs inline within the wiring harness at a current-protecte...

Fusible Link is a sacrificial circuit-protection device used in the vehicle electrical system. Rated at 60A and identified by its yellow body, it ...

Fusible Link - 100A Blue for the primary electrical protection circuit. A high-current fusible link that installs inline within the wiring harness...

Fuel Injector Pipe for the high-pressure injection circuit of the 300 TDi 2.5L diesel engine. This rigid steel pipe carries metered high-pressure ...

Injector Pipe - number-one cylinder high-pressure injector pipe for the 2.5L 300 TDi turbo diesel. This rigid steel pipe carries diesel at injecti...

Screw - M8 x 25mm is a fastener used in the assembly of the LT230 transfer gearbox. The LT230 is a two-speed transfer box fitted to Defender, Disc...

Tow Ball & Pin Hitch Assembly for the towing system, mounting to the rear towing bracket. The assembly combines a tow ball for standard ball-c...

Bulb & Holder for the instrument panel warning lights. The assembly pairs an illumination bulb with its holder, which fits into the rear of the...

Injector O-Ring - a sealing ring for the fuel injectors in the electronic fuel injection system. It seals the injector where it locates in its bore...

Main Bearing Kit 010 King

Connecting Rod Bearing Set for the 2.5L 4-cylinder engine, supplied in 0.030" oversize. These are the big-end shell bearings that fit between the ...

Connecting Rod Bearing Set for the 2.5L 4-cylinder engine, supplied in standard size. These are the big-end shell bearings that fit between the cr...

Main Bearing Set - a set of crankshaft main bearing shells for the Rover V8 petrol engine. The main bearings are the split shell bearings that car...

Nyloc Nut M5 - M5 hex nyloc (nylon insert) locknut. The nylon insert creates friction against the thread to resist loosening under vibration. Stan...

Pipe Clamp for the engine oil cooler pipe circuit. This clamp plate secures the oil cooler pipes in the engine bay, restraining them against vibra...

Exhaust Clamp securing a front exhaust pipe joint. This clamp draws together and seals the joint between two sections of the front exhaust, holdin...

Fuel Tank Plug, M12 threaded, fitted to the fuel tank body. It seals a threaded port in the tank associated with the fuel pump, sender and filler ...

Fuel Filter Assembly within the diesel fuel supply circuit, removing contaminants from the fuel before it reaches the injection system. Installed ...

Power Steering Box Bolt - mounting bolt for the power steering box. The bolt secures the Adwest Heavyweight three-bolt power steering box to the c...

Starter Motor for the 2.5L 4-cylinder diesel engine, part of the engine electrical starting circuit. When the ignition is operated the solenoid th...

Engine Oil Sump for the 2.5L 300 TDi turbo diesel, part of the engine lubrication system. The sump bolts to the underside of the cylinder block an...

Paint-clearing screw from the standard fastener range. The thread is formed so that it cuts through the paint film as the screw is driven, leaving...