Range Rover Parts

Oil Sump Gasket seals the oil pan (sump) to the cylinder block on the V6 diesel engine. It maintains an oil-tight joint at the base of the engine,...

Bolt

Front Brake Pad Set - friction pads for the front disc brake calipers, supplied as a complete axle set covering both front wheels. The pads are cl...

Connecting Rod Bolt for the connecting rod assembly of the TDV6 / TDV8 turbo diesel V-engine. The bolt clamps the big-end cap to the connecting ro...

Front Upper Suspension Arm, left-hand, part of the front independent suspension. The upper arm connects the top of the front wheel knuckle to the ...

Transmission Oil Cooler from the automatic transmission cooling circuit. Installed in the front cooling pack, it receives hot fluid from the gearbo...

Manifold Absolute Pressure Sensor for the 3.0L V6 diesel engine (TDV6, second generation, single and twin-turbo). The MAP sensor measures the abso...

Bolt - M8 x 75mm secures the lower timing gear on the V6 diesel engine. It is a fastener within the timing gear drive assembly. Thread size M8, le...

Rear Brake Disc - vented, 325 mm diameter. Part of the rear brake discs and calipers assembly. The disc mounts to the rear hub flange and provides...

Air Suspension Pipe Kit - installation pipework for an AMK-type air suspension compressor. The kit supplies the air lines that connect the compres...

Steering Column Rotary Coupler - the rotary coupling, or clock spring, mounted on the upper steering column behind the steering wheel as part of th...

Lower Timing Gear Screw - a fixing screw in the engine timing drive, retaining the lower timing gear. Used on the 3.0 V6 diesel engine (and the 2....

Silicone Turbo and Intercooler Hose Kit for the 2.7L TDV6 turbo diesel charge-air circuit, covering the hose runs between the turbocharger, the int...

Fuel Injector Pressure Sensor - high-pressure fuel rail sensor in the direct-injection fuel supply circuit. It measures the fuel pressure in the i...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surround an...

Thermostat for the engine cooling system on the 3.0L 24V DOHC V6 turbo diesel engine. It regulates coolant flow between the engine and radiator, s...

Thermostat & Housing is a combined coolant thermostat and housing assembly within the engine cooling system. The thermostat regulates coolant ...

Rear Seat Back Adjusting Handle - the release lever on the rear seat frame assembly. The handle operates the seat back latch, releasing the backre...

Crankshaft Trigger Wheel provides the timing reference for the crankshaft position sensor. Mounted at the flywheel, the toothed reluctor wheel rot...

EGR Tube connecting the exhaust manifold to the EGR valve on the 3.0L V6 turbo diesel engine. Carries hot exhaust gas from the exhaust manifold to...

Radiator Hose - Bottom for the 5.0L AJ133 V8 petrol engine, part of the cooling system pipes and hoses. The bottom hose returns cooled coolant fro...

Lambda Sensor - right-hand bank exhaust gas oxygen sensor for the 5.0L AJ133 V8 petrol engine, mounted in the front pipe and catalyst section of th...

Lambda Sensor - right-hand bank exhaust gas oxygen sensor for the 5.0L AJ133 V8 petrol engine, mounted in the front pipe and catalyst section of th...

Water pump for the cooling system of the 2.7L V6 turbo diesel. Circulates coolant through the cylinder block and heads, the radiator and the heate...

Fuel Injection Pump Bolt secures the high-pressure fuel injection pump to its mounting on the engine. It provides the clamping load that holds the...

Wheel Nut Set - set of twenty wheel nuts, sufficient for four five-stud road wheels. Each nut clamps the road wheel against the hub face on the wh...

EGR Valve Gasket for the 2.7L TDV6 diesel engine, sealing the inlet side of the exhaust gas recirculation (EGR) valve. Fitted at the EGR valve joi...

Rear Brake Disc - vented, 325 mm diameter, supplied as a pair. Part of the rear brake discs and calipers assembly. Each disc mounts to the rear hu...

Solenoid Control Switch - the push-button engine start and stop switch mounted in the centre console facia, part of the Facia and Console Switch as...

Suspension Arm Fitting Kit - the mounting hardware for a front upper suspension arm (wishbone) on the front independent suspension. The kit contai...

Suspension Arm Fitting Kit - the replacement fasteners used when a rear lower suspension arm is renewed. The arm's pivot bolts pass through the re...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Filter Air Panel

Flanged Hex Bolt M10 x 25mm - a threaded fastener used in the engine timing gear and turbocharger mounting assemblies. The integral flange under t...

Heater Hose and Bracket forms part of the heater coolant circuit, carrying engine coolant to and from the heater matrix that warms the cabin. The ...

Front Brake Pad Set - friction pads for the front disc brake calipers, forming part of the front foundation braking assembly. The pads are carried...

Head Bolt Set - the cylinder head bolts for one cylinder head of the 2.7 TDV6 diesel engine. The bolts secure the cylinder head to the block and a...

Rear Brake Pad Set - friction pads for the rear disc brake assembly. The pads sit in the caliper on either side of the brake disc. When the hydrau...

Front Brake Pad Set - friction pads for the front disc brake assembly. The pads sit in the caliper on either side of the brake disc. When the hydr...

Lambda Sensor (heated exhaust gas oxygen sensor) fitted upstream of the catalytic converter on the 5.0 litre V8 petrol engine (AJ133), in both natu...