Range Rover Parts

Front Brake Pad Wear Sensor for the front axle brake assembly, forming part of the brake pad wear warning circuit. The sensor is a wire loop carri...

Air Filter - engine air cleaner element, seated in the intake air cleaner housing upstream of the mass air flow sensor and the turbocharger inlet. ...

Mini Relay with four blade terminals, rated at 70 amp, grey housing. A four-terminal mini relay switches a single normally-open high-current circu...

Anti-Roll Bar Link - Front, the connecting link between the front anti-roll bar end and the suspension strut in the front suspension assembly. The...

Front Brake Hose - the flexible section of the front brake circuit, running between the rigid brake pipe on the body and the front brake caliper. T...

EGR Inlet Gasket for the 2.0L AJ200 Ingenium diesel Exhaust Gas Recirculation system. Seals the inlet joint of the EGR assembly to maintain a gas-...

O-Ring is a 60mm sealing ring used in the Exhaust Gas Recirculation (EGR) circuit of the 2.0L four-cylinder diesel engine (AJ200 / AJ20D4 family). ...

O-Ring for the Exhaust Gas Recirculation (EGR) circuit. This seal maintains a gas-tight joint within the EGR section, sealing the connection betwe...

Front Crankshaft Oil Seal for the AJ200 2.0L four-cylinder petrol and diesel engine. It seals the front of the crankshaft where it passes through t...

Fuel Filter for the diesel fuel supply system. This primary filter removes contaminants and water from the fuel before it reaches the high-pressure...

Clip is a fastening used within the body moulding assembly, retaining exterior trim and moulding panels against the bodywork.

Gasket - Exhaust Manifold

Exhaust Pipe Gasket seals the joint in the front section of the exhaust system, maintaining a gas-tight connection between the mating exhaust flang...

Blade Fuse - 5A is a 5-amp plug-in automotive blade fuse used in the vehicle fuse and relay boxes to protect an electrical circuit. It seats in a ...

O-Ring for the oil filter and cooler assembly. It seals a connection within the oil cooler and filter assembly, maintaining oil-tight integrity at...

Sealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...

Turbo Gasket sealing the joint between the exhaust manifold and the turbocharger. The same gasket seals both the exhaust manifold and the turbocha...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

Cylinder Head Cover Gasket for the 2.0L Petrol engine. This gasket seals the cylinder head cover to the cylinder head, containing oil within the v...

Coolant Degas Hose connects the radiator to the coolant expansion tank within the engine cooling system. It carries deaeration (degas) flow from t...

Magnetic Oil Drain Plug - M14 x 21 sump drain plug in the engine lubrication system. The plug seals the drain aperture in the oil sump and is remo...

Seal - Power Transfer Unit

Fuel Pump Support Housing Seal seals the mounting interface of the high-pressure fuel pump support housing on 2.0L Si4 petrol engines. The high-pr...

Turbocharger Oil Return Hose Gasket for the 2.0L Si4 TIVCT petrol turbo engine. It seals the joint at the turbocharger oil return (drain) hose, al...

Anti-Roll Bar Bush is the insulator bush that clamps the anti-roll bar into its chassis mounting bracket. It locates the bar while allowing it to ...

Body Moulding Retainer Clip, a lantern-type fastener for the vehicle's exterior trim. The clip secures exterior body mouldings - such as the rocke...

Accessory Drive Idler Pulley in the front end accessory drive (FEAD) belt system of the 2.0L 16V turbocharged petrol engine. The idler pulley guid...

Expansion Tank is the coolant expansion and overflow reservoir in the engine cooling system. It accommodates the thermal expansion of coolant, sep...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Intercooler Outlet Tube carries cooled, pressurised charge air from the intercooler outlet toward the engine intake on 2.0L turbocharged petrol app...

ABS Sensor for the front axle, part of the anti-lock braking and stability control system. The wheel speed sensor reads the toothed reluctor ring ...

Wheel hub bearing for the front and rear knuckle and hub assemblies. The bearing carries vehicle load between the hub and the knuckle and allows t...

Front spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...

Track Rod End is the ball-joint assembly at the outer end of the steering track rod, connecting the steering linkage to the front hub carrier. The...

Windshield Washer Reservoir stores washer fluid for the windscreen and headlamp washing systems. It houses the washer pump(s) and supplies the win...

Turbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Bump Stop for the front suspension. Mounted on the damper, the bump stop cushions the end of suspension travel, absorbing the impact as the wheel ...

Door Mirror Cover - exterior housing cover for the right-hand door mirror assembly, forming the outer shell of the mirror body. Supplied primed an...

Sensor Assembly

EGR Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals a joint in the EGR circuit, maintaining a gas-tig...

Heater Blower Motor Resistor for the heating and air-conditioning system. It regulates the current supplied to the blower motor, setting the fan s...

Ignition Coil for the 2.0L four-cylinder petrol engine (AJ200 / AJ20P4, including PHEV). This is a coil-on-plug unit that mounts directly on the sp...

Sensor Assembly

Solenoid Control Switch - ignition and start control switch located in the facia and console. It controls the engine start function through the ve...

Cylinder Head Gasket seals the joint between the cylinder head and the cylinder block on the 2.2L 16V common-rail diesel engine (DW12), containing ...