Range Rover Parts

Bonnet Gas Strut supports the bonnet in the raised position and dampens its opening and closing. Gas-pressurised lift strut mounted between the bo...

Parcel Shelf Strap Button is the pivot fixing that anchors the parcel shelf support strap in the load compartment. The support strap lifts the par...

Manifold to Cylinder Head Stud secures the exhaust manifold and turbocharger assembly to the cylinder head. Threaded mounting stud used in the exh...

Camshaft Sprocket Washer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It fits at the camshaft sprocket within the timing...

Tailgate Gas Strut supports the raised tailgate (luggage compartment door), holding it open and damping its movement. Gas-charged strut for vehicl...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Camshaft Spacer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It locates in the camshaft sprocket and timing gear area. ...

Oil Pump Drive Sprocket for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It drives the engine oil pump through the oil pump ...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

A-Pillar Finisher - Outer is the exterior trim finisher fitted to the outer A-pillar, giving the pillar its finished external appearance where the ...

Exterior Rear View Mirror Glass for the left-hand (LH) door mirror. Replacement glass that clips onto the mirror adjuster backing plate within the...

Fuel Pump Cover Gasket for the engine-mounted high-pressure fuel pump on the 2.0L turbocharged direct-injection petrol engine. Seals the joint bet...

Exhaust Pipe Gasket for the front exhaust section of the 2.0L turbocharged petrol engine. Seals the flanged front pipe to catalyst joint, providin...

Valve Stem Seal Set for the 2.0L 16V petrol engine, supplied as a set of eight seals. Valve stem seals fit at the top of the valve guides in the c...

CV Boot Kit for the inner constant-velocity joint of the front driveshaft. The boot seals the inner CV joint, retaining its grease and keeping out ...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Oil Drain Plug for the 2.0L 16V petrol engine. It seals the drain point in the oil pan (sump) and is removed to drain the engine oil at a service.

Water Outlet Connector for the 2.0L 16V turbocharged petrol engine. It mounts at the water pump outlet and connects the coolant hoses that route co...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Timing Gear Bolt for the 2.0L 16V petrol engine. It secures a gear on the engine's timing drive.

Valve Spring Retainer for the 2.0L 16-valve turbocharged petrol engine, fitted in the cylinder head valve train. The retainer caps the top of the ...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Throttle Body Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the throttle body and the inlet manifold. It mai...

Auxiliary Battery, wet non-spillable type, providing backup power to the automatic transmission gear change assembly. Used with the AWF21 6-speed ...

Inlet Manifold Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the inlet manifold and the cylinder head. It ma...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Transmission Oil, SAE 75W, meeting specification BOT 352, supplied in a 1 L bottle. For the 6-speed manual transmission (M66) and, on hybrid appli...

Transmission Oil, SAE 75W, meeting specification BOT 352, supplied in a 1 L bottle. For the 6-speed manual transmission (M66) and, on hybrid appli...

Windscreen Washer Reservoir stores the washer fluid supply for the screen wash system and, on this variant, the headlamp power wash jets. This res...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Lower Knuckle Bolt, a hex-head M12 x 130 mm bolt for the front knuckle and hub assembly. It retains the lower end of the knuckle, clamping it to t...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Hub Bearing Circlip for the rear hub assembly. The circlip locates in a groove in the rear knuckle to retain the wheel bearing in its housing, hol...

Coil Spring for the front suspension. The coil spring supports the vehicle's weight at the front axle and maintains ride height, working with the ...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...