for Discounts / VAT
for Discounts & Correct VAT
Parts for all Range Rover generations, from the Classic to the current L460. This collection covers the full model family including Range Rover Sport L494, Evoque, and Velar. Orders are fulfilled from the Netherlands and ship across the EU. Use the generation filters above or select your model below to find parts that fit your exact chassis.
Timing Chain Tensioner Arm bears against the timing chain within the timing drive assembly, providing the face through which the tensioner applies ...
View full detailsO-Ring sealing the variable valve timing (VVT) solenoid cover. Seals the VVT solenoid cover within the engine timing gear, preventing oil leakage ...
View full detailsBanjo Bolt for the turbocharger on the 2.0L 16V Si4 TIVCT petrol engine. A banjo bolt is a hollow union bolt that fastens a fluid line to the turb...
View full detailsSealing Ring - 34.2 x 3.0mm O-ring that seals a joint in the thermostat housing and EGR cooling circuit. Fitted to the 2.0L four-cylinder AJ200/AJ...
View full detailsConnecting Rod Bolt secures the connecting rod big-end cap to the connecting rod within the crankshaft, pistons and bearings assembly. The bolt cl...
View full detailsLithium-Ion Battery - the backup battery for the Telematics Control Unit (TCU). It supplies backup power to the telematics control unit so the uni...
View full detailsGuide - Timing Chain
Mudflaps - Front
Wind Deflectors - Front - Evoque 3DR
Wind Deflectors - Set of 4 - 5DR Evoque
Performance Air Filter - Evoque
Hex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...
View full detailsHex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...
View full detailsNut and Washer Assembly is an M6 hexagonal nut supplied together with its washer as a single assembly. The washer spreads the clamping load across...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on the 2.2L Td4 diesel engine. The belt is driven from the crankshaft pulley and r...
View full detailsSuspension arm bush for the rear position of the front lower suspension arm (wishbone), in the front strut suspension assembly. The bush presses i...
View full detailsBall Joint
Ball Joint Fitting Kit
Suspension arm bush for the front lower suspension arm (wishbone) in the front strut suspension assembly. The bush presses into the inboard eye of...
View full detailsTiming Chain Guide - LH Primary - a fixed guide in the timing drive assembly of the 2.0L four-cylinder Ingenium petrol engine (AJ200 / AJ20P4), inc...
View full detailsTiming Chain Guide - LH Primary - a fixed guide in the timing drive assembly of the 2.0L four-cylinder Ingenium petrol engine (AJ200 / AJ20P4), inc...
View full detailsInlet Valve for the 2.0L 4-cylinder petrol engine (AJ200 / AJ20P4), part of the cylinder head valve train. It seals the inlet port against the com...
View full detailsDrive Shaft Boot Kit - Outer Constant Velocity Joint - Front, part of the front axle drive shaft assembly. The boot seals the outer constant veloc...
View full detailsExhaust Manifold Fixing Spacer - a fixing component within the exhaust manifold mounting arrangement of the 2.2L CR DI 16V four-cylinder diesel eng...
View full detailsDrive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...
View full detailsArm - Timing Chain Tensioner
O-Ring for the high-pressure diesel fuel injection pump. The ring seals the joint between the pump body and its mounting face on the engine, preve...
View full detailsPCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...
View full detailsIridium Spark Plug for the 2.0L 16V TIVCT turbocharged petrol engine (Si4, 240PS). The plug threads into the cylinder head and fires beneath its c...
View full detailsPCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...
View full detailsLimited Slip Rear Axle Oil, supplied in a 1 litre container. A hypoid gear oil for rear drive units fitted with a limited-slip differential. The a...
View full detailsFront Brake Hose - the flexible section of the front brake circuit, running between the rigid brake pipe on the body and the front brake caliper. U...
View full detailsRear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...
View full detailsFront Brake Pad Wear Sensor Wire from the front brake pad wear warning circuit. The sensor wire is routed into a slot in the front brake pad frict...
View full detailsInlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...
View full detailsAir Filter - engine air cleaner element, seated in the intake air cleaner housing upstream of the mass air flow sensor and the turbocharger inlet. ...
View full detailsRear Brake Pad Set - Ceramic Friction pads for the rear disc brake assembly, using a ceramic-based friction compound. The pads locate in the rear ...
View full detailsRear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...
View full detailsCoolant Temperature Sensor mounted in the cylinder head coolant gallery, part of the engine cooling and engine management system. The sensor is a ...
View full detailsCrankshaft Main Bearing for the 2.0L Ingenium four-cylinder diesel engine (AJ200D / AJ20D4). The main bearing provides the plain bearing surface b...
View full detailsBrake Pad Set - Front - friction pads for the front disc brake assembly. The pads locate in the caliper carrier on either side of the brake disc. ...
View full detailsDoor Handle Gasket - sealing gasket for the exterior door handle and lock assembly, part of the door closures group. It sits between the handle es...
View full detailsInlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...
View full detailsGlow Plug - the pre-heat element for one cylinder of the 2.0L four-cylinder AJ200 / AJ20D4 diesel engine, threaded into the cylinder head so its ti...
View full detailsValve Stem Seal, Exhaust - cylinder head valve train of the 2.0L 16-valve TiVCT turbocharged petrol engine. Fits over the exhaust valve stem at th...
View full detailsThe Range Rover line covers four distinct sub-brands and twelve named generations stocked at Budget Parts: the full-size Range Rover (Classic, P38, L322, L405, L460), the Range Rover Sport (L320, L494, L461), the Range Rover Evoque (L538, L551), and the Range Rover Velar (L560). Each is a structurally distinct vehicle on a different platform with different engines, electronics, and components. Ordering by model name alone is rarely enough; chassis code and year range are what actually determine fitment.
If you are not certain which generation you own, the 17-digit VIN is the fastest path to confirmation. The VIN appears on the door jamb plate, the windscreen base, and the V5C registration document. The tenth character encodes the model year on all post-1980 vehicles. If you need help decoding your VIN, contact the Budget Parts team directly with the full number and we will confirm the correct generation and chassis code.
The table below covers the full Range Rover family stocked on this site. Use it to identify your chassis code and confirm your production year range before selecting a generation-specific collection from the grid below.
| Generation | Chassis Code | Years | Platform Notes |
|---|---|---|---|
| Range Rover Classic | (no L-code) | 1970 to 1996 | Body-on-frame. 3.5 to 4.2 Rover V8 petrol; 2.4 / 2.5 VM diesel from 1986; 200Tdi from 1989; 300Tdi from 1994 |
| Range Rover P38 | P38A | 1994 to 2001 | Body-on-frame. Rover V8 4.0 and 4.6 petrol; BMW M51 2.5-litre turbodiesel I6 |
| Range Rover (Third Gen) | L322 | 2002 to 2012 | First monocoque Range Rover. BMW engines pre-2006, Jaguar AJ family from 2006, AJ133 V8 + 4.4 TDV8 from 2010. ZF 6HP, ZF 8HP on 4.4 TDV8 from MY2010 |
| Range Rover (Fourth Gen) | L405 | 2013 to 2022 | First production 4x4 with all-aluminium monocoque. 3.0 TDV6 / SDV6, 4.4 SDV8 diesel, 5.0 AJ133 V8 petrol, 2.0 Ingenium P400e PHEV from MY2019, 3.0 Ingenium I6 MHEV from MY2020 |
| Range Rover (Fifth Gen) | L460 | 2022 to present | MLA-Flex platform. 3.0 Ingenium I6 MHEV diesel and petrol, 4.4 BMW V8, P440e and P510e PHEV (2022-2023), P460e and P550e PHEV (2024+) |
| Range Rover Sport (First Gen) | L320 | 2005 to 2013 | Integrated Body Frame (IBF) platform shared with Discovery 3, not L322. Air suspension standard. 2.7 / 3.0 TDV6, 3.6 TDV8, 4.2 / 5.0 V8 petrol |
| Range Rover Sport (Second Gen) | L494 | 2013 to 2022 | JLR D7u aluminium platform shared with L405. 3.0 TDV6 / SDV6, 4.4 SDV8 diesel, 5.0 V8 petrol, P400e PHEV from MY2018 |
| Range Rover Sport (Third Gen) | L461 | 2022 to present | MLA-Flex platform shared with L460. 3.0 Ingenium I6 MHEV, P440e and P510e PHEV, 4.4 BMW V8 (P530) |
| Range Rover Evoque (First Gen) | L538 | 2011 to 2019 | D8 / LR-MS platform. Ford-derived engines pre-2015, JLR Ingenium from 2015. Haldex AWD on four-wheel-drive variants |
| Range Rover Evoque (Second Gen) | L551 | 2019 to present | JLR PTA (Premium Transverse Architecture). All-Ingenium engine lineup with 48V MHEV. P300e PHEV from MY2020 |
| Range Rover Velar | L560 | 2017 to present | JLR D7a aluminium platform shared with Jaguar F-Pace. Ingenium I4 and I6 engines including D300 V6 diesel (pre-2020) and 3.0 MHEV inline-six (from 2020) |
Production years, chassis codes, and platform designations are aligned with Land Rover's published technical and product documentation. For Range Rover model history, generation specifications, and official press materials, the authoritative source is the Land Rover Media Centre.
Each generation has its own parts collection with chassis-specific fitment, engine variants, and quality grades. Select your generation below to filter to the parts that fit your vehicle.
Body-on-frame original from 1970 to 1996. Rover V8 petrol, VM diesel, 200Tdi and 300Tdi diesel variants.
Range Rover Classic parts →P38A chassis, 1994 to 2001. Rover V8 4.0 and 4.6 petrol, BMW M51 2.5 diesel.
Range Rover P38 parts →Third-generation flagship, 2002 to 2012. BMW M62 / M57 early build, Jaguar AJ family from 2006, AJ133 V8 + 4.4 TDV8 late.
Range Rover L322 parts →Fourth-generation, 2013 to 2022. First all-aluminium monocoque, full diesel and petrol range plus P400e PHEV.
Range Rover L405 parts →Current fifth-generation, 2022 onwards. MLA-Flex platform. Ingenium I6, BMW V8, P440e and P510e PHEV.
Range Rover L460 parts →First-generation Sport, 2005 to 2013. IBF platform shared with Discovery 3 (not the L322). Air suspension standard.
Range Rover Sport L320 parts →Second-generation Sport, 2013 to 2022. D7u aluminium platform shared with the L405. TDV6, SDV8, and P400e PHEV.
Range Rover Sport L494 parts →Current third-generation Sport, 2022 onwards. MLA-Flex platform shared with L460. PHEV and V8 variants.
Range Rover Sport L461 parts →Evoque family covering both L538 (2011-2019) and L551 (2019 onwards). Select your generation on the Evoque collection page.
Range Rover Evoque parts →First-generation Evoque, 2011 to 2019. D8 / LR-MS platform with Haldex AWD on 4WD variants.
Range Rover Evoque L538 parts →Second-generation Evoque, 2019 onwards. PTA platform, all-Ingenium with 48V MHEV.
Range Rover Evoque L551 parts →L560 mid-size derivative, 2017 onwards. D7a platform shared with Jaguar F-Pace.
Range Rover Velar parts →Most Range Rover parts are chassis-specific. A part that fits an L322 will not fit an L405 or an L460. A part that fits a Range Rover Sport L494 will not fit a Sport L320 or Sport L461. Two reliable confirmation methods exist.
The first is your 17-digit VIN. Position 10 identifies the model year on all post-1980 Land Rover and Range Rover vehicles, and positions 4 through 8 encode the vehicle descriptor section (engine, transmission, drive type, body style). A Land Rover dealer or authorised VIN decoder can return the full build specification from this string.
The second is your engine code, visible on the engine identification plate. Land Rover engine codes such as 306DT, 276DT, AJ133, M62, M57, and AJ20 each map to specific generations and production phases. The generation table above lists the engine families used on each chassis code.
If you are diagnosing a fault and need to confirm whether your vehicle is affected by a known issue before selecting parts, the Technical Guides section below links to fault-specific articles for the generations most prone to documented service issues.
Parts CategoriesThe collections below cover specific component categories across the Range Rover family. They are useful when you are ordering by component type (for example, an air suspension compressor or a brake disc set) and already know your chassis-specific part number. For chassis-fitment guidance, always cross-reference against your generation-specific collection above.
Air struts, shock absorbers, height sensors, wishbones, bushings, and EAS components across all Range Rover generations.
Suspension parts →Discs, pads, calipers, sensors, brake lines and EPB-compatible components for Range Rover and Range Rover Sport.
Brake parts →Gaskets, seals, timing components, EGR parts, and ancillaries for BMW, Jaguar, Ford, and JLR Ingenium engine families.
Engine parts →Thermostats, coolant pumps, radiators, hoses, and Y-piece replacements for the 5.0 V8 and other Range Rover variants.
Cooling parts →Sensors, relays, switches, ECU components, door modules, and lamp assemblies across all generations.
Electrical parts →Filter kits, oil change packages, and routine service bundles for Range Rover petrol and diesel engines.
Service kits →Every product listing on this site carries a quality grade. The grade describes where the part was made and which channel it travelled through to reach the warehouse. All three grades are stocked across most generation collections.
Genuine Land Rover parts are supplied through the official Jaguar Land Rover distribution network. They carry the Land Rover part number, Land Rover packaging, and full traceability to the JLR supply chain. Choose Genuine for vehicles still under manufacturer warranty, repairs requiring official parts for compliance or insurance reasons, and concours-grade restoration where original packaging matters.
OEM parts are produced by the same component supplier that manufactures the Genuine part, but sold outside the JLR distribution channel. The physical component is frequently identical to the Genuine version, often with a different box and no Land Rover part number on the label. Choose OEM for cost-effective repairs where original specification quality matters without the official-channel markup. Independent workshops working on vehicles outside warranty most often choose this grade.
Aftermarket parts are independently manufactured alternatives. Quality varies by supplier, so each Budget Parts aftermarket listing identifies the manufacturer where known. Choose aftermarket for older vehicles where Genuine parts may no longer be available, non-critical components, or budget-led repairs. The product description notes any relevant fitment or application limitations.
Each generation collection (L322, L405, L460, Sport L320, Sport L494, Evoque, Velar) shows the grade per listing and lets you filter by quality tier from the left-hand panel.
EU Stock and DispatchBudget Parts holds stock for the full Range Rover line at its warehouse in The Hague and dispatches across all EU member states. Norway, Switzerland, and other European non-EU destinations are also served. VAT is handled correctly at checkout for EU customers, and EU VAT-registered businesses can apply for reverse-charge invoicing through the wholesale portal.
Independent Land Rover workshops, multi-vehicle owners, and EU trade buyers can register a wholesale account for trade pricing, account-based credit terms, technical support from the Budget Parts team, and direct VIN-level fitment confirmation before ordering. Registration is available through the wholesale login page.
Technical GuidesThe articles below are published technical guides relevant to Range Rover owners and workshops. They provide diagnostic depth and component context that supports, but does not duplicate, the parts collections linked above.
A fault-led guide covering the most common L322 failure categories including air suspension, fuel system, driveline, and transmission issues across the BMW and Jaguar powertrain eras.
Range Rover L322 common faults guide →Workshop-level diagnosis guide for the fourth-generation Range Rover. Covers diesel, petrol, EAS, ACE, and electrical fault categories across the L405 production run from 2013 to 2022.
Range Rover L405 problems and fixes →Overview of the fifth-generation Range Rover including the MLA-Flex platform, NVH engineering, and key component groups relevant to L460 service and repair.
Range Rover L460 platform guide →A detailed fault reference for the first-generation Range Rover Sport, covering air suspension, timing chain, and drivetrain failure patterns across the L320 production run.
Range Rover Sport L320 problems guide →Fault and parts reference for the second-generation Range Rover Sport, covering D7u platform components, TDV6 and SDV8 diesel issues, and L494-specific service patterns.
Range Rover Sport L494 faults guide →Performance, engine, and platform guide for the Range Rover Velar L560 covering the D7a platform, Ingenium engine variants, and key Velar-specific service points.
Range Rover Velar L560 guide →Budget Parts stocks parts for all main Range Rover generations available in the EU market. These include the Range Rover Classic (1970-1996), the P38 / P38A (1994-2001), the L322 (2002-2012), the L405 (2013-2022), and the current L460 (2022 onwards). The collection also covers all three Range Rover Sport generations (L320 from 2005, L494 from 2013, L461 from 2022), both Range Rover Evoque generations (L538 from 2011, L551 from 2019), and the Range Rover Velar L560 (2017 onwards). Use the generation grid above or the chassis-code link cards to select the collection that matches your vehicle.
The most reliable method is your 17-digit VIN. The VIN appears on the door jamb plate (driver's side), at the base of the windscreen, and on your vehicle registration document. Position 10 of the VIN encodes the model year. Position 4 through 8 encodes the vehicle descriptor section, which includes engine family, transmission, and drive type. If you already know your chassis code (such as L322, L405, L320, or L538), the generation table above confirms your production year range and engine availability. For vehicles registered during transition years between generations, contact the Budget Parts team with your VIN and they will confirm the correct generation, engine code, and applicable parts catalogue.
The four are structurally distinct sub-brands. The full-size Range Rover line (Classic, P38, L322, L405, L460) is the original flagship, with a longer wheelbase, more luxury-focused trim, and the largest engine range. The Range Rover Sport line (L320, L494, L461) is performance-oriented, built on platforms shared with full-size Range Rover (L494 on D7u with L405, L461 on MLA-Flex with L460) but with shorter wheelbase, sportier suspension geometry, and SVR-style performance variants where applicable. The Evoque (L538, L551) is the compact sub-brand on transverse-engine platforms shared with Land Rover Discovery Sport. The Velar (L560) is the mid-size derivative on the D7a platform shared with Jaguar F-Pace. Parts are not interchangeable across sub-brands.
Yes. Budget Parts maintains active stock for the Range Rover Classic (1970-1996) and Range Rover P38 (1994-2001) across all three quality tiers. The Classic and P38 are now classed as classic and youngtimer vehicles respectively in most EU markets, and both have a strong restoration parts catalogue covering Rover V8 engine components, body and chassis parts, electrical items, and trim. BMW M51 diesel parts for the P38 and 200Tdi/300Tdi parts for the late Classic are also stocked. For specific items not visible on the collection, the Budget Parts team can source individual parts on request with your chassis number.
Genuine parts come through the official Jaguar Land Rover distribution channel with the Land Rover part number and JLR packaging. OEM parts are the same component direct from the original manufacturer, supplied outside the JLR channel — the physical part is often identical but the price reflects the absence of the official-channel markup. Aftermarket parts are independently manufactured equivalents from third-party suppliers; quality varies by manufacturer and Budget Parts identifies the supplier where known. Each product listing shows its grade, and quality tier filters are available within every generation collection. For warranty work or vehicles where original specification is required, choose Genuine. For most independent workshop repairs, OEM is the standard choice. For older vehicles or non-critical components, aftermarket is often the most practical option.
Yes. Budget Parts ships to every EU member state and to most non-EU European destinations including Norway, Switzerland, Iceland, and the UK. Orders are picked and dispatched from the warehouse in The Hague, Netherlands. EU customers are invoiced with correct VAT treatment for their delivery country, and EU VAT-registered businesses can apply for reverse-charge invoicing through the wholesale portal. Larger items such as body panels, complete propshafts, and subassemblies may carry different shipping conditions; specific shipping costs and delivery estimates are shown at checkout.
Yes, for the PHEV variants that exist across the line: Range Rover L405 P400e (2019-2022), Range Rover L460 P440e and P510e (2022-2023) and P460e / P550e (2024+), Range Rover Sport L494 P400e (2018-2022), Range Rover Sport L461 P440e and P510e (2022 onwards), and Range Rover Evoque L551 P300e (2020 onwards). High-voltage traction battery packs and main drive units are typically dealer-only items outside the scope of this collection; standard mechanical, suspension, cooling, brake, and body parts for PHEV variants are stocked alongside conventional ICE variants in each generation collection. Filter by your chassis code and check the product description for PHEV-specific fitment notes where applicable.
Yes. The Budget Parts wholesale portal is open to registered trade and workshop accounts across the EU. Once approved, the account provides trade pricing, account-based credit terms, direct technical support from the Budget Parts team, and VIN-level fitment confirmation before despatch on complex orders. For pre-registration enquiries, use the contact page or apply through the wholesale login page.