Range Rover Parts

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Thermostat for the engine cooling system, supplied complete with its sealing ring. The thermostat is located in the base of the thermostat housing...

Front Cover Gasket for the timing gear cover, sealing the front cover to the cylinder block. Fits the 2.7L and 3.0L TDV6 diesel V6 engines. The ga...

Head Gasket - V8 - LH seals the left-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between ...

Shock Absorber is a rear hydraulic damper in the rear suspension, controlling spring oscillation between the rear axle and the body. It is a direc...

Brake Caliper - Rear - RH is the right-hand rear caliper of the disc brake assembly. Under hydraulic pressure from the rear brake circuit, it clam...

Rear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...

Head Gasket - V8 - RH seals the right-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between...

Rear Anti-Roll Bar Bush for the rear stabiliser (anti-roll) bar. The bush locates the anti-roll bar to its mounting bracket, permitting controlled...

Screw - an M6 x 20 mm pan-head setscrew with a Torx drive, used as a general multi-application fastener. The Torx socket gives positive tool engag...

Bolt for the TDV6 2.7L and 3.0L diesel engine, used in the engine timing system assembly.

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Parking Sensor Speaker is the audible warning speaker for the rear parking aid system. It produces the proximity warning tone driven by the parkin...

Inner Tie Rod for the rack-and-pinion steering linkage. The inner tie rod threads into the end of the steering rack and houses the inner ball join...

Pollen Filter for the cabin ventilation system, installed in the HVAC air intake housing. It traps pollen, dust and airborne particulates from the...

Flange Bolt Hex-head flange bolt, M8 x 1.25 x 80mm. General-purpose fastener used in chassis frame and component mountings.

Air to Coil Conversion Kit - plus 2" ride height. Replaces the electronic air suspension with coil springs and dampers at all four corners. The ki...

Brake Pad Set for the rear axle, forming the friction pair against the rear brake discs within the rear braking circuit. This set covers both rear...

Manifold Pipe for the 2.7L TDV6 diesel engine. This pipe is part of the manifold assembly on the 2.7 TDV6 diesel engine. Replacement is required w...

Spark Plug Well Gasket seals the spark plug aperture in the camshaft (valve) cover on the right-hand cylinder head bank. It prevents engine oil fr...

Oil Filter Housing Cover is the cover for the cartridge-type oil filter assembly on 3.0 GDI petrol and 5.0 AJ-V8 engines. This cover retains the r...

Front Anti-Roll Bar - a hydraulically actuated stabiliser bar for the Active Cornering Enhancement (ACE) system. It varies roll stiffness by trans...

Exhaust Manifold Bolt for the exhaust manifold assembly on AJ-V8 4.4L Petrol and 4.2L Supercharged petrol engines. This bolt fastens the exhaust m...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head within the exhaust assembly. It maintains a gas-tight s...

Rear Silencer - Left-Hand in the dual exhaust system of the Range Rover Sport L320 fitted with the 5.0L SC V8 petrol engine (AJ133). The rear sile...

Rear Silencer - Right-Hand in the dual exhaust system of the Range Rover Sport L320 fitted with the 5.0L SC V8 petrol engine (AJ133). The rear sil...

Exhaust Insulator in the exhaust mounting assembly. The insulator is a rubber mounting that suspends the exhaust system from the vehicle underfram...

Rear Exhaust Clamp in the rear exhaust assembly. The clamp secures the joint between adjacent sections of the rear exhaust, compressing around the...

Brake Light Switch RR Sport 05-09 Disco3 05-09

CV Boot Kit

CV Boot - Rear - Open Diff is the rubber protective boot for the outer constant velocity joint on the rear driveshaft, for vehicles with an open re...

Parking Brake Adjuster Kit for the rear parking brake (drum-in-disc) mechanism. The kit renews the adjuster components that set the clearance betw...

Handbrake Actuating Pawl Rod Actuating rod within the rear parking brake mechanism of the drum-in-disc handbrake assembly. It transmits handbrake ...

Rear Brake Wear Sensor is part of the rear braking assembly, fitted to the brake pad on the rear axle. The sensor monitors brake pad thickness. As...

Parking Brake Shoe Fitting Kit for the drum-in-hat parking brake housed within the rear brake discs. The kit supplies the retaining pins and clips...

Maintain reliable handbrake performance with this OEM handbrake shoe & lining kit, designed for Land Rover models requiring a 1-wheel applicati...

Brake sensor ABS - RRSport

Brake Pad Wear Sensor - front brake pad wear warning wire, part of the front disc brake friction-monitoring circuit. The sensor wire clips into th...

Front Brake Caliper Fitting Kit - pad retaining hardware for the front brake caliper. The pins pass through the caliper body to retain the brake p...

Brake Disc is a rear brake rotor for the rear-axle braking assembly. The disc mounts to the rear hub and rotates with the wheel. The brake caliper...

Front Brake Disc - vented, 360 mm diameter. Sits in the front brake discs and calipers assembly. The disc bolts to the front hub flange and forms ...

Anti-Roll Bar Bush for the front suspension, locating the front anti-roll (stabiliser) bar to the body. The bush clamps around the bar and allows ...

Anti-Roll Bar Bush - a mounting bush in the rear suspension anti-roll (stabiliser) bar assembly. It clamps the rear anti-roll bar to the body, loc...

Transfer Relief Valve - Front Axle in the electronic air suspension system. Fitted in the front axle branch of the air suspension pneumatic circui...

Rear Anti-Roll Bar Link for the rear stabiliser (anti-roll) bar assembly. The drop link connects the end of the anti-roll bar to the rear suspensi...

Hub and Bearing Assembly

Link

Drive Belt