Range Rover Sport L320 Parts

Joint washer exhaust TD5

Wheel Spanner with a 27 mm socket, a hand tool for removing and refitting wheel nuts. Engages the 27 mm hexagon of the wheel nut to loosen or tigh...

Brake Hose Clip in the brake hydraulic circuit, securing a flexible brake hose to its mounting bracket where the hose crosses from the chassis to a...

Flange Nut, M16 for the suspension arm mountings. The integral flange spreads the clamping load over a wider bearing area and removes the need for...

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Clip

Relay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...

Bolt Mounting bolt for the rear suspension arm. Part of the rear multi-link suspension assembly, it secures a rear upper or lower suspension arm a...

Wheel Spanner - 24mm for removing and fitting wheel nuts on Land Rover vehicles. This 24mm spanner is sized for the standard wheel nut used across...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Coolant Expansion Tank for the engine cooling system, serving as the pressurised header and overflow reservoir. The tank accommodates coolant expa...

Hex Nut, M24 x 1.5mm securing the constant-velocity (CV) joint stub shaft to the wheel hub within the driveline. The nut retains the CV joint and ...

Bonnet Gas Strut a gas-filled telescopic support for the bonnet. It counterbalances the weight of the bonnet, assisting opening and holding it sec...

Wheel Nut - Black secures a road wheel to the hub, clamping the wheel against the hub face when tightened to the specified torque. The nut carries...

Sealing Washer for the fuel injector, part of the diesel fuel injection system. The washer seats between the base of the injector and its bore in ...

Brake Caliper - Rear - RH is the right-hand rear caliper of the disc brake assembly. Under hydraulic pressure from the rear brake circuit, it clam...

Bolt wishbone OEM

Suspension Bolt Kit - the fitting hardware for a rear upper suspension arm (wishbone), used when replacing the arm at its mounting points. The kit...

Boost your vehicle's fuel economy and performance with the EGR Blanking Kit for Discovery 3 and Range Rover Sport 2.7 TDV6 engines (up to VIN 7A, n...

Flanged Nut M16 flanged nut for the rear suspension arm fixings. Part of the rear multi-link suspension assembly, it secures the lower and upper s...

Throttle Housing Seal for the 2.7L TDV6 and 3.0L SDV6 diesel engines, sealing the throttle body to the air intake. The seal sits between the throt...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

This special nut (thread size M14) is used in the rear suspension system across several Land Rover and Range Rover models. It plays a crucial role ...

Ensure the secure and hassle-free lowering and raising of your spare wheel with this spare wheel winch, designed for Land Rover models with an unde...

Thermostat for the 4.4L AJ V8 and 4.2L Supercharged V8 petrol engines, fitted within the engine cooling circuit. The thermostat regulates coolant ...

Fuel Filler Door Actuator operates the fuel tank filler flap as part of the central locking system. The actuator drives the locking pin that secur...

Windscreen Washer Motor and Pump A dual-outlet electric pump that draws fluid from the washer reservoir and delivers it to two separate washer circ...

Front Fog Lamp - Right-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplement...

Washer Adjusting washer for the rear suspension arm mounting. Part of the rear multi-link suspension assembly, it locates at the suspension arm pi...

Fuel Leak Off O-Ring seals the leak-off (spill return) connection at a diesel fuel injector. It sits in the injector leak-off circuit that collect...

Auxiliary Drive Belt for the 2.7L TDV6 diesel engine on vehicles without an active roll stabiliser, 2092mm. This ribbed belt transmits drive from ...

Rear Brake Pad Set for the rear axle disc brakes. The friction pads are clamped by the rear brake calipers against the brake discs to generate the...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Hex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...

Suspension Bolt Kit - Front Lower is the fitting kit of nuts and bolts for the front lower suspension arm (wishbone), used to replace the original ...

Automatic Transmission Filter for the ZF automatic gearbox fluid circuit. It sits in the transmission fluid pan and filters the ATF drawn up into t...

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Parking Aid Sensor, Rear - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. This is the ...

Steering Column Bolt for the lower steering shaft coupling. This pinch bolt clamps the lower steering shaft to its mating joint, securing the colum...

Rear Lower Suspension Arm for the rear independent suspension, left-hand side. The lower control arm (wishbone) connects the rear hub carrier to t...

Exterior Mirror Glass for the right-hand door mirror. The replaceable glass element locates into the exterior door mirror housing, providing the r...

Spindle rod link

Front Fog Lamp - Left-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplementa...

Gear Linkage Repair Kit renews the worn components of the automatic transmission gear selector linkage. It restores accurate movement between the ...

Brake Disc - a rear vented brake disc, the rotating friction surface the caliper pads clamp against to slow the vehicle. The internal vanes draw a...

Circlip for the lower steering knuckle bush. This circlip retains the bush within the lower steering knuckle, forming part of the front axle and s...

Special Nut - secures the rear knuckle to the lower and upper suspension arms. It retains the rear suspension arm bolts at the knuckle, holding th...

Bolt Mounting bolt for the front suspension arm. Part of the front suspension assembly, it secures a front upper or lower control arm (wishbone) a...