Range Rover Sport L320 Parts

Air Suspension Ride Height Sensor - position sensor within the electronic air suspension system. Mounted between the body/chassis and a suspension...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Dust Cover - Fuel Filler is a protective cover fitted at the fuel tank filler neck. It locates behind the fuel filler flap and shields the filler ...

Drive Belt Tensioner for the secondary (supercharger) belt drive fitted to the supercharged petrol V6 and V8 engines. It uses a spring-loaded pivot...

EGR Cooler Hose for the exhaust gas recirculation (EGR) circuit on the 3.0L 24V DOHC V6 turbo diesel engine. It carries engine coolant to the EGR ...

Manifold Absolute Pressure (MAP) Sensor for the 3.0L V6 diesel engine. Mounted on the throttle housing, it measures the absolute pressure in the i...

Water pump for the 3.0L V6 diesel (TDV6 / SDV6). It drives coolant circulation through the cylinder block and heads, out through the radiator circu...

Crankshaft Trigger Wheel for the engine timing and crankshaft position system. The trigger wheel (reluctor ring) mounts on the crankshaft and provi...

Front Brake Pad Set - the friction pads for the front-axle disc brakes. The pads sit in the caliper and are clamped against the brake disc by the c...

Fuel pressure sensor for the high-pressure direct injection circuit of the 5.0L V8 petrol engine (AJ133), naturally aspirated and supercharged. Mo...

Variable Valve Timing Solenoid - oil control solenoid for the variable valve timing system. The solenoid regulates engine oil flow to the camshaft...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Coolant Hose - Thermostat carries engine coolant to and from the thermostat housing within the cooling circuit. The moulded hose ties the thermost...

Fan Bracket for the secondary drive belt system, supplied complete with idler pulley and belt tensioner. The bracket mounts to the front of the en...

Bolt - Exhaust Manifold & EGR - a fixing bolt used in the exhaust manifold and exhaust gas recirculation (EGR) assembly of the TDV6/TDV8 diesel...

Transmission Oil Cooler from the automatic transmission cooling circuit. Installed in the front cooling pack, it receives hot fluid from the gearbo...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Oil Pump Seal for the V6 diesel engine oil pump assembly, part of the engine lubrication circuit. It seals the oil pump interface to prevent oil l...

Camshaft Pulley Hub mounts to the front of the right-hand (RH) cylinder bank camshaft on the 2.7L and 3.0L V6 diesel engine, forming part of the ti...

Timing Chain & Tensioner Kit - Upper

Coolant Connecting Tube - rigid coolant transfer pipe located at the thermostat housing within the engine cooling system of the 2.7L TDV6 diesel en...

Oil Cooler - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the cooler core to...

Fuel Supply Manifold distributes fuel to the injectors on the left-hand cylinder bank of the 3.0L V6 diesel engine. It forms part of the engine's ...

Rear Towing Hook that fits the rear tow hitch receiver, providing a rated attachment point for towing and recovery at the rear of the vehicle. Sup...

Radiator - the primary coolant-to-air heat exchanger of the engine cooling system, mounted in the front cooling pack. Hot coolant leaving the engi...

Exhaust Crossover Pipe for the 3.0L V6 diesel, part of the front exhaust assembly. It carries exhaust gas from one cylinder bank across the engine ...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Oil filter housing assembly for the 2.7 V6 turbo diesel, incorporating the engine oil cooler and the fuel cooler in a single casting. The housing ...

Throttle Body and Motor - the electronic throttle assembly in the engine air intake system, mounted between the intake air ducting and the inlet ma...

Exterior Wing Mirror - the door-mounted exterior rear-view mirror assembly. It provides the driver's rearward and blind-spot view along the side of...

Air Suspension Control Module is the electronic control unit of the air suspension system. It interprets the ride height sensor signals and the dr...

Compressor Overhaul Kit - Hitachi

Hex Nut, M24 x 1.5mm securing the constant-velocity (CV) joint stub shaft to the wheel hub within the driveline. The nut retains the CV joint and ...

Stud

Vacuum Hose - Pump to Booster The vacuum supply hose in the brake servo vacuum circuit. It connects the engine-driven vacuum pump outlet to the bra...