for Discounts / VAT
for Discounts & Correct VAT
Parts for the Range Rover Sport L320, built from 2005 to 2013 on the Integrated Body Frame platform shared with the Land Rover Discovery 3. This collection covers all L320 variants: 2.7 TDV6, 3.6 TDV8, 4.4 V8, 4.2 and 5.0 Supercharged. Use the filters above to narrow by category or quality grade.
Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...
View full detailsTyre Pressure Sensor - component of the tyre pressure monitoring system (TPMS). Monitors tyre inflation pressure and transmits the reading by radi...
View full detailsTiming Chain Tensioner Blade is the tensioner blade in the engine's timing chain drive. It provides the curved, low-friction face that the timing c...
View full detailsExhaust Manifold Gasket seals the exhaust manifold to the turbocharger on the 3.0L V6 diesel engine. Fitted at the manifold-to-turbocharger flange...
View full detailsCollet - Anti-Roll Bar Pipe - retaining collet used in the pipe connections of the Active Cornering Enhancement (ACE) anti-roll bar system. The co...
View full detailsCollet - Anti-Roll Bar Pipe - retaining collet used in the pipe connections of the Active Cornering Enhancement (ACE) anti-roll bar system. The co...
View full detailsAutomatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...
View full detailsAutomatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...
View full detailsAutomatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...
View full detailsO-Ring sealing the thermostat housing in the engine cooling circuit. Seats between the thermostat housing and its mating face to seal the coolant ...
View full detailsO-Ring for the fuel injector, fitted within the fuel injectors and pipes assembly. Seals the fuel injector at its mounting to prevent fuel and com...
View full detailsExhaust Gasket for the front exhaust system on the 4.4L DOHC DITC V8 diesel engine. Seals the connection between the secondary turbocharger outlet...
View full detailsTurbocharger Oil Return Tube Gasket seals the oil return (drain) tube where it meets the turbocharger, within the turbocharger lubrication circuit....
View full detailsTurbocharger Oil Return Tube Gasket seals the oil return (drain) tube where it meets the turbocharger, within the turbocharger lubrication circuit....
View full detailsTyre Pressure Monitoring Sensor (TPMS), a 433 MHz wheel-mounted unit that fits to the valve inside each road wheel. It measures tyre pressure and t...
View full detailsFuel Pressure Regulator (fuel pressure control valve) for the diesel high-pressure fuel injection system. Mounted on the high-pressure fuel pump, i...
View full detailsCrankshaft Seal and Retainer - the rear crankshaft oil seal complete with its retainer housing, sealing the rear of the crankshaft where it exits t...
View full detailsPads Brake Front Rrsport Bm - Discovery 4
EGR Gasket Inlet
EGR Inlet Gasket for the exhaust gas recirculation system on the 3.0L V6 turbo diesel engine. Seals the joint at the EGR inlet, where recirculated...
View full detailsBrake Caliper Locating Pin Kit for the sliding brake caliper. The guide pins let the caliper float on its carrier bracket so both brake pads wear ...
View full detailsGasket
Brake Caliper Locating Pin Kit for the sliding brake caliper. The guide pins let the caliper float on its carrier bracket so both brake pads wear ...
View full detailsImmobiliser Transceiver for the vehicle anti-theft (immobiliser) system. This is the transceiver aerial that reads the transponder in the key at t...
View full detailsAxle Oil 75W-90 is a hypoid gear oil for the front and rear differentials and final drive units. The 75W-90 grade lubricates the crown wheel and p...
View full detailsAxle Oil 75W-90 is a hypoid gear oil for the front and rear differentials and final drive units. The 75W-90 grade lubricates the crown wheel and p...
View full detailsFlanged Nut with an integral flange that spreads the clamping load and helps resist loosening, removing the need for a separate washer. Used to se...
View full detailsPiston Ring Set for the 5.0L V8 AJ133 petrol engine, supplied at standard bore size. The ring pack seals the combustion chamber against the cylind...
View full detailsCamshaft Screw for the cylinder head and camshaft assembly of the 3.0-litre TDV6 diesel engine. This is a manufacturer-specification retaining scr...
View full detailsPiston ring set for the 5.0L V8 AJ133 petrol engine, both naturally aspirated and supercharged, in +0.50 mm oversize. One set covers a single pist...
View full detailsPiston Ring Set for the 5.0L V8 AJ133 petrol engine, supplied at standard bore size. The ring pack seals the combustion chamber against the cylind...
View full detailsThermostat Housing Gasket seals the joint between the thermostat housing (water outlet) and the cylinder head within the cooling system. It mainta...
View full detailsThermostat Housing Gasket seals the joint between the thermostat housing (water outlet) and the cylinder head within the cooling system. It mainta...
View full detailsThermostat Housing Gasket seals the joint between the thermostat housing (water outlet) and the cylinder head within the cooling system. It mainta...
View full detailsBrake Disc Retaining Screw that locates the brake disc against the wheel hub flange, holding the disc square and in position while the caliper and ...
View full detailsBrake Disc Retaining Screw that locates the brake disc against the wheel hub flange, holding the disc square and in position while the caliper and ...
View full detailsCharge Air Temperature Sensor for the charge-air system of the 3.0L V6 turbo diesel engine. The sensor sits in the intercooler ducting between the ...
View full detailsBreather Tube forming part of the crankcase ventilation circuit on the 5.0L V8 petrol engine (AJ133). It carries crankcase blow-by gases from the ...
View full detailsRetaining Clip is a fastening clip used in the radiator grille and front bumper assembly. It secures the grille and front bumper trim components t...
View full detailsClip - retaining clip for the radiator grille and front bumper assembly. It secures the grille and bumper components to their mountings.
Overflow Container Cap for the cooling system expansion (overflow) reservoir. The cap seals the coolant expansion tank and maintains system pressu...
View full detailsHead Gasket for the right-hand cylinder bank of the 4.4L DOHC V8 turbo diesel (TDV8) engine. Seals the joint between the right-hand cylinder head ...
View full detailsCylinder Head Gasket for the left-hand cylinder head of the 4.4L DOHC DITC V8 diesel (TDV8) engine. Seals the joint between the left-hand cylinder...
View full detailsHead Gasket for the right-hand cylinder bank of the 4.4L DOHC V8 turbo diesel (TDV8) engine. Seals the joint between the right-hand cylinder head ...
View full detailsCylinder Head Gasket for the left-hand cylinder head of the 4.4L DOHC DITC V8 diesel (TDV8) engine. Seals the joint between the left-hand cylinder...
View full detailsExhaust downpipe gasket sealing the flanged joint between the front exhaust pipe (downpipe) and the catalytic converter, in the front section of th...
View full detailsExhaust downpipe gasket sealing the flanged joint between the front exhaust pipe (downpipe) and the catalytic converter, in the front section of th...
View full detailsFinal Drive Lubricant - a fully synthetic 75W-90 gear oil meeting API GL5, supplied in a 4 litre pack. Specified for the front and rear final driv...
View full detailsThe Range Rover Sport L320 was produced from 2005 to 2013. It is the first generation of the Range Rover Sport line and carries the chassis designation L320. The vehicle is built on the Integrated Body Frame (IBF) platform, a separate-chassis architecture shared with the Land Rover Discovery 3 (L319). This platform is distinct from the monocoque L322 Range Rover. The IBF construction means suspension mounts, body mounts, drivetrain tunnels, and underbody components are architecturally related to the Discovery 3, not the full-size Range Rover.
Production ran across two distinct build periods. The pre-facelift range (2005 to 2009) used the 2.7 TDV6 (engine code 276DT) and the 4.2 litre Supercharged V8 (AJ33S) as its primary variants. The facelift range (2010 to 2013) introduced the 3.0 TDV6 (engine code 306DT) as the primary diesel replacement, along with the 5.0 V8 and 5.0 Supercharged (AJ133). The 3.6 TDV8 (engine code 368DT) and 4.4 V8 (AJ41) were offered across both periods.
This distinction matters when ordering parts. Service kits, oil filters, timing components, and engine-specific hardware are not interchangeable between the 276DT and 306DT. If you are unsure which engine your vehicle has, confirm using the engine code stamped on the block or by decoding your VIN before ordering.
FitmentThe two main build periods share a chassis code but differ in engine, gearbox calibration, suspension electronics, and several bodywork components. When ordering parts, confirm which build period applies to your vehicle.
The simplest method is to check your VIN. The 10th character of your 17-digit VIN encodes the model year. This Land Rover VIN identification guide explains how to decode this character for your exact build year.
For engine parts specifically, the engine code is stamped on the block and is also recorded on the V5C or registration document. Matching the engine code to the correct parts listing is the most reliable way to confirm fitment before purchase.
If you need help identifying the correct part for your chassis and engine combination, contact the Budget Parts team directly.
This collection includes Genuine, OEM, and aftermarket parts for all L320 variants. Parts categories covered include engine components, air suspension, braking systems, drivetrain, transmission, electrical, cooling, steering, and service consumables.
Genuine parts are supplied through the official Land Rover distribution chain and carry original Land Rover part numbers. OEM parts are manufactured by the same suppliers that produce components for Land Rover directly, and are sold outside the official channel. Aftermarket parts are independently manufactured alternatives. Each product listing in this collection states its quality grade. For guidance on which grade suits your application, the quality-grade explanation on the Range Rover parts hub applies equally here.
Parts CategoriesThe categories below represent the highest-demand repair and service areas for the Range Rover Sport L320 in the EU market. Each links to the relevant component collection. Use the filters on the destination page to narrow to L320 fitment.
Engine parts for the L320 cover rebuild kits and components for the 2.7 TDV6, 3.0 TDV6, and 3.6 TDV8 diesels, including crankshaft and main bearing kits for the 276DT, cylinder head bolts, EGR components, and oil separator kits. Engine parts are also available for the 4.2 SC, 4.4 V8, and 5.0 SC petrol variants.
Air suspension parts include compressors (covering both AMK and Hitachi fitments across pre-facelift and facelift builds), air springs, struts, valve blocks, height sensors, and relay components. The L320 uses a four-corner electronically controlled EAS system across all variants.
Braking parts include discs, pads, EPB (Electronic Parking Brake) kits, calipers, and brake lines. The EPB system fitted to the L320 uses cable-operated rear shoes driven by a chassis-mounted actuator, a layout shared with the Discovery 3 and Discovery 4.
Drivetrain parts include propshafts, driveshafts, transfer case components, differential parts, and driveline seals.
Service and consumable parts include oil filters, air filters, fuel filters, spark plugs (petrol variants), glow plugs (diesel variants), coolant hoses, and drain plugs.
Rebuild kits and service components for 276DT, 306DT, 368DT, AJ41, AJ33S, and AJ133 engines. Filter to your engine variant on the destination page.
L320 engine parts →EAS compressors, air springs, valve blocks, height sensors, and shock absorbers. Filter to L320 fitment on the destination page.
L320 suspension parts →Discs, pads, calipers, and EPB components for pre-facelift and facelift builds. Filter to L320 fitment on the destination page.
L320 brake parts →Propshafts, driveshafts, universal joints, and driveline rebuild components for all L320 variants.
L320 driveshaft and propshaft parts →Budget Parts supplies independent Land Rover workshops and trade buyers across the EU. A wholesale portal is available for registered trade accounts, providing trade pricing and account-based ordering. If you operate a workshop or purchase parts in volume, visit the wholesale portal to register or log in.
Technical GuidesThe articles below are published technical guides relevant to Range Rover Sport L320 owners and independent workshops. They provide diagnostic context and maintenance reference for the part categories covered in this collection.
A model-wide fault reference covering the L320 production run from 2005 to 2013. Covers the 2.7 TDV6 crankshaft and timing system, air suspension failure patterns, EPB faults, and electrical issues. Relevant before ordering engine rebuild, suspension, or braking parts for a vehicle with a known fault.
L320 common problems guide →A component-level breakdown of the L320 EAS system. Explains which parts fail first (compressor, air springs, valve block, height sensors), what symptoms each failure produces, and what to replace. Relevant before ordering air suspension components for an L320 showing height or compressor warnings.
L320 air suspension fault guide →A service guide for the 276DT timing system used in the pre-facelift L320 (2005 to 2009). Covers service intervals, the front belt and rear toothed belt configuration, and parts required. Relevant for any 2.7 TDV6 L320 approaching a timing service or showing symptoms of timing system wear.
2.7 TDV6 timing belt guide →The full Range Rover model family, including all Sport generations and full-size Range Rover variants.
Range Rover parts →Parts for the second-generation Range Rover Sport (2014 to 2022), the successor to the L320.
Range Rover Sport L494 parts →The L319 Discovery 3 shares the IBF platform with the L320 and several drivetrain, suspension, and underbody components cross-fit.
Discovery 3 parts →Yes. This collection includes parts for all L320 variants built from 2005 to 2013. That covers the pre-facelift build (2005 to 2009) with the 2.7 TDV6, 4.2 SC, and 4.4 V8 engines, and the facelift build (2010 to 2013) which introduced the 3.0 TDV6 and 5.0 V8 variants. Some parts are interchangeable across the full production run. Others, particularly engine-specific components and certain suspension electronics, are build-period specific. Always confirm your engine code and model year before ordering.
Your 17-digit VIN is the most reliable method. The 10th character encodes the model year. The VIN is located on the door jamb plate, the windscreen base, and your vehicle registration document. Land Rover's official VIN identification guide explains how to read the model year digit. For engine identification, the engine code is stamped on the block and is also noted on your V5C or equivalent EU registration document. If you need help confirming fitment, contact Budget Parts directly before ordering.
No. The 2.7 TDV6 (engine code 276DT) and the 3.0 TDV6 (engine code 306DT) are different engines with different blocks, different timing systems, different oil capacities, and different service part specifications. The 276DT uses a front timing belt with a separate rear toothed belt. The 306DT uses a mixed chain and belt timing system. Oil filters, service kits, and timing components are engine-specific. Always confirm your engine code before ordering these parts.
The L320 uses the Integrated Body Frame (IBF) platform, a separate-chassis architecture shared with the Land Rover Discovery 3 (L319). This is a different construction from the monocoque L322 Range Rover. The IBF platform means the L320 shares drivetrain, suspension mount geometry, and certain underbody components with the Discovery 3. This is relevant when ordering suspension, driveline, and chassis-related parts, some of which have cross-fitment with the Discovery 3.
Genuine parts carry the original Land Rover part number and are supplied through the official JLR distribution chain. OEM parts are made by the same manufacturers that supply Land Rover directly, sold outside the official channel. The component specification is often identical to Genuine. Aftermarket parts are independently manufactured alternatives. Each listing in this collection states its quality grade. For non-critical service parts and bodywork consumables, aftermarket is often appropriate. For engine internals, timing components, and safety-critical braking parts, Genuine or OEM is the recommended choice.
Yes. Orders are fulfilled from the Netherlands and ship across the EU. Customers in Germany, Belgium, France, Sweden, and other EU member states order regularly. Shipping timelines and delivery options are shown at checkout. For large or trade orders, the Budget Parts wholesale portal provides account-based ordering and trade pricing.