Range Rover Sport L494 Parts

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Window Control Switch - double (twin-element) electric window switch for the door trim switch pack. The switch is mounted in the door casing and p...

Front Suspension Arm - upper front control arm for the right-hand side of the front suspension. It links the chassis to the top of the front wheel...

Camshaft Sprocket A component of the timing gear that transmits drive from the timing chain to the camshaft, keeping valve operation synchronised w...

Exhaust Camshaft Sprocket for the valve timing drive on the 2.0L 16V TIVCT turbo petrol engine. Mounted on the exhaust camshaft, it is driven by t...

Crankshaft Pulley mounts on the nose of the crankshaft at the front of the engine and drives the front-end accessory belt. Fitted to the 2.0L 16V ...

Steering Column Joint of double cruciform (universal joint) design, fitted in the steering column intermediate shaft. It transmits steering input ...

Engine Mounting Bracket for the 2.0L I4 Ingenium diesel (AJ200). The bracket bolts to the side of the cylinder block and carries the engine mount,...

Door Latch Actuator for a front door, part of the central locking system. The unit combines the door latch with the electric actuator that locks a...

Door Latch Actuator for a rear door, part of the central locking system. The unit combines the door latch with the electric actuator that locks an...

Engine Mounting Bracket - a structural bracket within the engine mounting system. The bracket bolts to the engine and locates the engine mount, ca...

Transmission Oil Cooler - heat exchanger in the automatic transmission cooling circuit, mounted in the front cooling pack alongside the radiator an...

Exhaust Manifold Stud for TDV6 2.7 and 3.0 and TDV8 3.6 diesel engines, used to fasten the exhaust manifold to the cylinder head. On 2.7 TDV6 engi...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Oil Pump Seal for the V6 diesel engine oil pump assembly, part of the engine lubrication circuit. It seals the oil pump interface to prevent oil l...

Brake Disc - Front - ventilated front brake disc for the front brake discs and calipers assembly. The disc measures 349 mm in diameter by 34 mm th...

Camshaft Pulley Hub mounts to the front of the right-hand (RH) cylinder bank camshaft on the 2.7L and 3.0L V6 diesel engine, forming part of the ti...

Camshaft Sprocket is a timing drive gear in the valvetrain, mounted on the end of a camshaft. Driven by the timing chain from the crankshaft, it r...

Active Roll Bar Tube is a high-pressure hydraulic pipe in the Active Roll Control (ARC) system - the hydraulic Active Cornering Enhancement (ACE) t...

Camshaft Sprocket for the timing drive of the 3.0L V6 supercharged (AJ126) and 5.0L V8 supercharged (AJ133) petrol engines. Driven by the timing c...

Alternator Bracket mounts and locates the alternator on the engine, positioning it within the accessory drive belt run. Designed for the 4.4L DOHC...

Camshaft Sprocket for the camshaft drive, mounted on the end of the camshaft and driven by the timing chain from the crankshaft. It transmits the d...

Throttle Body for the air intake system of the 4.4L V8 diesel engine. The electronically actuated throttle valve regulates intake airflow into the...

Brake Pad Kit - Front - front axle set of disc brake pads for the 19-inch front brake disc and caliper installation. The pads are clamped against ...

Mirror Glass for the left-hand exterior door mirror. Convex glass (1400 mm radius) with an electrochromatic auto-dimming coating, shaped to the do...

Tube - Active Roll Bar System

Timing Chain & Tensioner Kit - Upper

Water Pump - auxiliary coolant pump serving the engine cooling circuit of the 3.0L V6 diesel (Gen2). It provides additional coolant circulation in...

Front Brake Pad Kit - friction pad set for the front disc brake assembly, for the 380 mm front disc and size 20 caliper configuration. The pads lo...

Brake Pads - Front - friction pads for the front axle of the uprated Brembo front brake assembly. The pads sit in the fixed Brembo caliper and cla...

Oil Cooler - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the cooler core to...

Front End Assembly - the forward body structure that ties the front panels, aprons and side members into a single front-end unit. It forms the fram...

Parking Camera, part of the surround camera and parking assistance system. It captures the video feed used by the driver assistance display during...

Fuel Supply Manifold distributes fuel to the injectors on the left-hand cylinder bank of the 3.0L V6 diesel engine. It forms part of the engine's ...

Oil Cooler for the 5.0-litre supercharged V8 petrol engine (AJ133). It forms part of the engine lubrication circuit, transferring heat from the eng...

Oil Pump for the engine lubrication system of the supercharged petrol V6 and V8 (AJ133) engines. Driven from the crankshaft, the oil pump draws oi...

Radiator is the primary heat exchanger of the Engine Cooling System, transferring heat from the engine coolant to the air drawn through the front c...