Range Rover Sport L494 Parts

Dirty Air Duct Guide for the engine air intake system. The guide locates and supports the dirty air duct, the unfiltered-air inlet duct that carri...

Turbocharger Coolant Hose from the engine cooling circuit, serving the turbocharger on the 3.0L AJ20P6 petrol engine. The hose carries engine cool...

O-Ring - seals a joint in the thermostat housing and EGR cooling circuit. Fitted to the 2.0L four-cylinder AJ200 diesel engine, it maintains a lea...

Turbocharger Cooling Hose - the coolant inlet hose in the turbocharger cooling circuit. It carries coolant to the turbocharger, feeding the water-...

O-Ring - seals the upper joint of the thermostat housing. Fitted to 3.0L supercharged V6 and 5.0L V8 petrol engines, it maintains a leak-tight coo...

Coolant Tube forming the primary coolant path between the cylinder block and the water outlet. This aluminium tube carries coolant from the engine...

Sealing Ring for the oil level sensor connection at the sump. Seals the oil level sensor wiring connector where it passes through the oil pan (sum...

Coolant Bleed Hose - bleed hose running from the engine to the coolant expansion tank. Fitted to the 2.0L four-cylinder AJ200 petrol engine, it ve...

Exhaust Pipe Gasket seals the front flanged joint of the exhaust system, maintaining a gas-tight connection and preventing exhaust leakage at the j...

Oil Pan Retainer for the 3.0L V6 diesel engine. This bracket locates within the oil pan assembly, retaining the oil level indicator (oil level sen...

Oil Filter for the engine lubrication system. Filters contaminants from the engine oil, protecting the lubrication circuit. Fitted to the 2.0L 16V...

Exhaust Mounting Rubber (insulator/hanger) in the exhaust system suspension. Supports the exhaust system on its mounting brackets, isolating exhau...

Timing Chain Guide locates and supports the timing chain within the timing drive assembly. It maintains correct chain alignment along its run, con...

Connector - Valve Block to Pipe for the air suspension system. This fitting joins the air suspension valve block to the air line, forming the seal...

Camshaft Cover Gasket - the sealing gasket between the camshaft (cylinder head) cover and the cylinder head. It seals the cam cover to the head to...

O-Ring is a sealing ring used in the Exhaust Gas Recirculation (EGR) circuit of the 2.0L four-cylinder AJ200 diesel engine. It seals a joint in th...

Timing Chain Guide locates and supports the timing chain within the timing drive assembly. It maintains correct chain alignment along its run, con...

Flywheel Bolt - hex head fastener that secures the flywheel to the rear crankshaft flange within the engine driveline assembly. Fitted to the 3.0L...

Cup Holder - an interior trim component fitted to the floor (centre) console. It provides a moulded holder to retain cups or containers within the...

Oil Return Hose - the oil drain hose in the turbocharger lubrication circuit. It returns oil from the turbocharger bearing housing to the sump aft...

Insulator is a rubber bush fitted in the front suspension, within the front cross member and stabiliser bar assembly. It locates and cushions the ...

Sealing Washer is the fuel injector sealing washer for the Ingenium diesel engine (2.0L and 3.0L AJ20 / AJ21 diesel). It seats at the base of the ...

Nut used in exterior body panel and trim fixings. Secures body components such as the luggage compartment door finisher, radiator grille and bumpe...

Front Crankshaft Oil Seal located at the front of the cylinder block, on the crankshaft. Seals the crankshaft where it exits the front of the engi...

Air Suspension Compressor Silencer - a noise-attenuating component in the air suspension system, fitted to the compressor assembly. It reduces the...

Seal Kit renews the seals at the hydraulic pipe connections of the Active Cornering Enhancement (ACE) anti-roll bar system. The ACE system uses hy...

O-Ring for the Exhaust Gas Recirculation (EGR) circuit. This seal maintains a gas-tight joint within the EGR section, sealing the connection betwe...

Front Crankshaft Oil Seal for the 2.0L TiVCT turbocharged petrol engine, located at the timing gear cover. Seals the front of the crankshaft where...

Front Wiper Blade for the windscreen wiper, in the passenger-side (right-hand) position on left-hand-drive vehicles. Sweeps the windscreen to clea...

Front Wiper Blade for the windscreen wiper, in the passenger-side (left-hand) position on right-hand-drive vehicles. Sweeps the windscreen to clea...

Vacuum Pump Gasket for the 4.4L V8 diesel engine. It seals the mating joint between the vacuum pump and its mounting face on the engine, forming pa...

Exhaust Gas Recirculation Gasket seals the joint between the EGR cooler and the EGR valve on the right-hand side, maintaining a gas-tight connectio...

Exhaust Gas Recirculation Gasket seals the exhaust gas recirculation (EGR) connection on the left-hand side, maintaining a gas-tight joint within t...

Circuit Breaker installs within the electrical power distribution system, protecting a circuit against overcurrent by interrupting the supply when ...

Crankshaft Gear forms part of the timing gear train, mounted on the crankshaft nose to drive the timing system and maintain synchronisation between...

EGR Valve Gasket seals the exhaust gas recirculation valve to its mating face within the EGR and front exhaust system. Fitted on the left-hand ban...

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation (EGR) system, where recirculated exhaust gas leaves the EGR valve/cooler ...

Valve Spring Seat is the seat on the cylinder head that locates the base of the valve spring, providing the surface against which the spring is com...

Exhaust Clamp secures a joint between two sections of the exhaust system, clamping the adjoining pipes together to form a gas-tight connection whil...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head, within the exhaust assembly. It contains combustion ga...

Solenoid Valve for the air suspension compressor assembly. It forms part of the compressor and air-line circuit, controlling the flow of compressed...

Intake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...

Sealing Ring sealing a joint within the engine timing gear covers. This O-ring seals a connection at the timing cover assembly, maintaining oil-ti...