Range Rover Sport L494 Parts

EGR Cooler Filter - filter element fitted within the exhaust gas recirculation cooler assembly of the 3.0L V6 diesel Gen2 engine. Recirculated exh...

Camshaft Sprocket Washer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It fits at the camshaft sprocket within the timing...

Front Brake Pad Set - friction pads for the front disc brake assembly. The pads locate in the front caliper and are clamped against the brake disc...

Exhaust Pipe Gasket for the front exhaust section of the 2.0L turbocharged petrol engine. Seals the flanged front pipe to catalyst joint, providin...

Oil Drain Plug for the 2.0L 16V petrol engine. It seals the drain point in the oil pan (sump) and is removed to drain the engine oil at a service.

Timing Gear Bolt for the 2.0L 16V petrol engine. It secures a gear on the engine's timing drive.

Valve Spring Retainer for the 2.0L 16-valve turbocharged petrol engine, fitted in the cylinder head valve train. The retainer caps the top of the ...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Timing Chain Tensioner Blade is the tensioner blade in the engine's timing chain drive. It provides the curved, low-friction face that the timing c...

Drive Chain Idler - timing gear idler sprocket for the 2.0L four-cylinder Ingenium engine family (AJ200 / AJ20 series, petrol and diesel). The idl...

Exhaust Manifold Gasket seals the exhaust manifold to the turbocharger on the 3.0L V6 diesel engine. Fitted at the manifold-to-turbocharger flange...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Radiator Hose is the top (upper) radiator hose for the 4.4L V8 diesel engine. It carries hot coolant from the engine outlet to the top of the radi...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Collet - Anti-Roll Bar Pipe - retaining collet used in the pipe connections of the Active Cornering Enhancement (ACE) anti-roll bar system. The co...

Cylinder Head Gasket seals the joint between the right-hand cylinder head and the engine block on the 3.0L DOHC supercharged GDI V6 petrol engine. ...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

Cylinder Head Gasket for the left-hand cylinder head of the 3.0L DOHC GDI supercharged V6 petrol engine. Seals the machined joint between the left...

Coolant Hose serving the fuel cooler inlet on the 3.0L V6 diesel engine, part of the cooling circuit that regulates fuel temperature. It carries c...

O-Ring sealing the thermostat housing in the engine cooling circuit. Seats between the thermostat housing and its mating face to seal the coolant ...

Hose Clamp for the exhaust gas recirculation (EGR) system. Secures a hose connection within the EGR circuit of the 4.4L DOHC V8 diesel (TDV8) engi...

Coolant Bleed Hose for the engine cooling system of the 4.4L V8 turbo-diesel (TDV8) engine. The hose forms part of the cooling-system bleed circui...

Wheel Cover set, fitted over the road wheels. The covers clip over the wheels to give a finished appearance and shield the wheel face from road di...

Wheel Cover for the road wheel. The cover fits over the wheel to give a finished appearance and shield the wheel face from road dirt and brake dus...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) circuit of the 4.4L DOHC V8 turbo-diesel (TDV8) engine. The gasket seals the joint betwe...

EGR Cooler Seal for the 4.4L DOHC DITC V8 diesel (TDV8). Seals a joint on the exhaust gas recirculation (EGR) cooler within the EGR circuit. Renew...

EGR Inlet Gasket for the 4.4L DOHC DITC V8 diesel (TDV8). Seals the inlet joint of the exhaust gas recirculation (EGR) circuit, between the exhaus...

EGR Outlet Gasket for the 4.4L DOHC DITC V8 diesel (TDV8). Seals the outlet joint of the exhaust gas recirculation (EGR) circuit, where recirculat...

Idler Pulley for the auxiliary (accessory) drive belt on the 4.4L DOHC V8 turbo diesel (TDV8) engine. Guides the auxiliary drive belt and maintain...

Throttle Gasket for the 4.4L DOHC V8 turbo-diesel engine. It seals the joint where the throttle body mounts to the intake, maintaining an airtight...

Filter - Oil - Element and Seal

Diesel Exhaust Fluid (AdBlue) for diesel vehicles fitted with a selective catalytic reduction (SCR) exhaust after-treatment system. The fluid is h...

EGR Inlet Gasket for the 4.4L DOHC V8 turbo-diesel engine, part of the exhaust gas recirculation (EGR) system. It forms the gas-tight joint where ...

EGR Outlet Gasket for the exhaust gas recirculation (EGR) system on the 4.4L DOHC DITC V8 diesel engine. Seals the joint between the EGR valve out...

Turbocharger Oil Return Tube Gasket seals the oil return (drain) tube where it meets the turbocharger, within the turbocharger lubrication circuit....

EGR Cooler Outlet Hose for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. It returns engine coolant from the exhaust gas recirculation (EGR) cooler t...

Exhaust Manifold Gasket for the 4.4L DOHC V8 turbo-diesel (TDV8) engine. It seals the joint between the exhaust crossover pipe and the exhaust mani...

Idler Pulley for the accessory drive belt system, mounted on the front of the engine within the auxiliary belt run. The idler pulley drives nothin...

Crankshaft Gear, the timing drive gear that mounts on the front of the crankshaft within the timing cover. It drives the timing chain, transferring...

Crankshaft Seal and Retainer - the rear crankshaft oil seal complete with its retainer housing, sealing the rear of the crankshaft where it exits t...